RaspberryMatic 3.81.5.20250326

[jens-maus]

This is release 3.81.5.20250326 of RaspberryMatic which is a major release with the following bugfixes and feature changes:

_{Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag}

🚧 Changes:

_{For all changes, see the full commit log.}

CCU/HomeMatic service changes:

• ac6447e1e - updated OCCU version to 3.81.5-1 integrating full compatibility to the CCU3 3.81.5 firmware which comes with the following changes:
  • With HmIP-WTH* wall thermostats, the previous mode was not always restored after a battery change.
  • HmIP-SRH - the value set for the “Event delay” configuration parameter was not displayed correctly.
  • HmIP-LSC - Channel 1 in the channel selection for channels and favorites was not offered.
  • It was not possible to edit a link between some devices.
  • HmIP-eTRV-3 - Extension of the channel parameters.
  • HmIP(W)-SMO230(-A) - The “Sensitivity” configuration parameter has been added.
  • HmIP-CTV - The value range of the angle for position detection has been extended for the HmIP-CTV from 10° - 45° to 0° - 180°.
  • HmIP-TACO -The value range of the angle for position detection has been extended from 10° - 45° to 0° - 180°.
  • HmIP-TACO - Config parameter Hysteresis renamed.
  • With HmIP-WTH*, errors during adaptation travel are now also displayed as a service message. The change is only effective for newly learned devices.
  • HmIP-DRG-DALI - Setting range of the “Display contrast” config. parameter extended.
  • ELV-SH-CTV - “Tilt change” channel parameter added.
  • HmIP-eTRV-F - Extension of the channel parameters
  • ELV-SH-CTH - The long name in the WebUI has been changed.
  • HmIP-ESI-GAS - The displayed gas flow rate has been extended from 2 to 3 decimal places.
• 4634ca176 - update generic_raw_uart to latest official version compatible to kernel 6.12.x. In addition, applied the corresponding changes/patches to our eq3_char_loop buildroot package as well.

WebUI changes:

• 015f346bf - add missing ROTARY_HANDLE_TRANSCEIVER patches for SHORT_ON_MIN_LEVEL profile parameters in 0188-WebUI-Fix-MissingEasymodeSHORT_ON_MIN_LEVEL WebUI patchset to fix direct connections with a HmIP-SRH/HmIP-FDT (Bearbeiten von DV's zwischen HmIP-SRH und HmIP-FDT nicht möglich. #3061).

Operating system changes:

• f89c04c7f - bump upstream kernel to 6.12.20
• 249f3ce8f - bump buildroot to 2025.02 and adapt platform configs accordingly.
• 9d060029f - use QUIT psplash-write command rather than kill to gracefully quit psplash upon finishing rcS.
• 18552d879 - bump rpi-eeprom to pieeprom-2025-03-10.bin (rpi5)
• 6419d2f24 - add actions/attest-build-provenance to release workflow to attest artifact and container provenance to be able to check validity of released container images.
• b468510e7 - bump tailscale from 1.80.2 to 1.80.3 (bump tailscale from 1.80.2 to 1.80.3 #3053)
• d4450a14a - fix CT storage selection by using '-content rootdir' option when searching for compatible CT storages.
• 85456a00f - make sure to output potential reasons why no RaspberryMatic container was found (e.g. the users uses a VM instead!)
• e0e0699aa - bump qemu-guest-agent to 9.2.2
• a166c8dfb - remove nodejs v20 downgrade patch because the latest buildroot 2024.11.2 and 2025.02 fixes the nodejs v22 compile issues.
• 0ab4ee883 - update rpi-firmware to latest 1.20250305
• 206d1d102 - Remove USB stack patches working around obsoleted Z-Wave devices issues as is is not required anymore and conflicts with current 6.12.x kernel versions.

👪 Contributors (alphabetically):

• @jens-maus

📝 Support:

For support on installation and help please visit the following web pages:

RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

• RaspberryPi5 Model B – (installation):
  _{📦 RaspberryMatic-3.81.5.20250326-rpi5.zip
  SHA256: c4a6fe8e4e48068c515bcb298c27e5ea3a89c680d3f671428932036ceea90d65}

• RaspberryPi4 Model B, RaspberryPi Compute Module 4, RaspberryPi 400 – (installation):
  _{📦 RaspberryMatic-3.81.5.20250326-rpi4.zip
  SHA256: 93efdada09e00acdbb4c4f4cf847e8c93910baa0013007323f9faa9743e0e144}

• CCU3, ELV-Charly, RaspberryPi3 Model B+, RaspberryPi3 Model B, RaspberryPi3 Model A+, RaspberryPi Compute Module 3, RaspberryPi Compute Module 3 lite, RaspberryPi Zero 2 W – (installation):
  _{📦 RaspberryMatic-3.81.5.20250326-rpi3.zip
  SHA256: a0f541881a7d362d0d9a9b144b37500bf40759c888cf726109be6c1956e69d48
  📦 RaspberryMatic-3.81.5.20250326-ccu3.tgz (only for initial CCU3 Firmware -> RaspberryMatic Upgrade)
  SHA256: c2b3a92a5c8b23b0f25c744cec970072b29d5ba93b25a1e28af355460ca92d2a}

• RaspberryPi2 Model B – (installation):
  _{📦 RaspberryMatic-3.81.5.20250326-rpi2.zip
  SHA256: 88aea21158c443542d59276cfd6978f06acabaa0eddf8a3d8dcf8fc6dc634241}

• RaspberryPi Zero W, RaspberryPi Zero, RaspberryPi Compute Module 1, RaspberryPi1 (A+/B+) – (installation):
  _{📦 RaspberryMatic-3.81.5.20250326-rpi0.zip
  SHA256: b7b82a25c1d62ece7a6d138617034216029fb16ddb17b7b1482c0e1e7ef8b0f6}

• TinkerBoard S, TinkerBoard – (installation):
  _{📦 RaspberryMatic-3.81.5.20250326-tinkerboard.zip
  SHA256: c2170dffaee680abda448dab8cda5bf1d7b4e1c0587997f34e85fc21e39588a8}

• ODROID-N2/N2+/C4/C2 – (installation):
  _{📦 RaspberryMatic-3.81.5.20250326-odroid-n2.zip
  SHA256: 08572ebef344f8f714f0b283e2c998662ededd407651defa1b28bed84932742f
  📦 RaspberryMatic-3.81.5.20250326-odroid-c4.zip
  SHA256: a9ee394f7d4a44170586fea38614a3c5136d386803078d6742dd34dc43ffa7b0
  📦 RaspberryMatic-3.81.5.20250326-odroid-c2.zip
  SHA256: 37ea9e10360e9a59eb12b3319557186d0905c2a9e335f67af6a7b26340f8b9b0}

• Generic-x86_64 – (installation):
  _{📦 RaspberryMatic-3.81.5.20250326-generic-x86_64.zip
  SHA256: 0df419299bba0ec9800bd001b00020a802f91d8444407d676053e4f1312d1a12}

• Open Virtual Appliance (OVA) – (ProxmoxVE, VirtualBox, ESXi, Synology, QNAP, Workstation Player, QEmu, UNRAID, HyperV):
  _{📦 RaspberryMatic-3.81.5.20250326-ova.zip
  SHA256: 890e21e4c2a30abbea76c33a76b167830291b8d5aa6a2481b941237e33abbbd6
  📦 RaspberryMatic-3.81.5.20250326.ova (only for initial OVA installation)
  SHA256: 72affdad3e42f7ee2e3472807d507181d86be8f159829bc9bbe725ebe9d3cd24}

• Docker / Open Container Initiative (OCI) – virtual appliance (installation):
  _{📦 RaspberryMatic-3.81.5.20250326-oci_amd64.tgz (amd64/x86_64)
  SHA256: cfc887eb9940440203639fac06331ab79abd9e8bc7889e322df8789eda2e1ce3
  📦 RaspberryMatic-3.81.5.20250326-oci_arm64.tgz (arm64/aarch64)
  SHA256: e518444d08d1f72d67756b927cb78495fbe2f628ae963cf9ad6105dbcfa092eb
  📦 RaspberryMatic-3.81.5.20250326-oci_arm.tgz (arm/armhf)
  SHA256: 3338aae56cb59e34f926362659aa9f82266d5d40916fee688d52230d397fde4b}

• LXC Container – virtual appliance (installation):
  _{📦 RaspberryMatic-3.81.5.20250326-lxc_amd64.tar.xz (amd64/x86_64)
  SHA256: ca247e761658a2fd387df177aeb020daf88a324d7b41713b0e05c7aa4fa28d6d
  📦 RaspberryMatic-3.81.5.20250326-lxc_arm64.tar.xz (arm64/aarch64)
  SHA256: 73724daa5d60a617650ebfd1b1868afa6f4dc5d4d868ee3aa3a9039c4a7e49f1
  📦 RaspberryMatic-3.81.5.20250326-lxc_arm.tar.xz (arm/armhf)
  SHA256: 15e1d6aa52ef5252d408c634bddf0c1eb2beec0b9bbd8c3d10ceadd78365cc3f}

• Generic-aarch64 Appliance – (ProxmoxVE):
  _{📦 RaspberryMatic-3.81.5.20250326-generic-aarch64.zip
  SHA256: 85053c570b7b96d1a309df5ae15ea1865ad1a82e48302520355df801aefca6ce}

• Kubernetes / K8s – virtual appliance:
  _{see install documentation}

• Home Assistant Add-on – virtual appliance:
  _{see install documentation}

---

This discussion was created from the release RaspberryMatic 3.81.5.20250326.