Skip to content
This repository has been archived by the owner on Dec 28, 2020. It is now read-only.

X9S 1295 用18版本,安装软件包overylay空间不够应该怎么办? #19

Open
liuyu160 opened this issue Aug 8, 2020 · 38 comments
Open

X9S 1295 用18版本,安装软件包overylay空间不够应该怎么办? #19

liuyu160 opened this issue Aug 8, 2020 · 38 comments

Comments

@liuyu160
Copy link

liuyu160 commented Aug 8, 2020

X9S 1295 用18版本,安装软件包overylay空间不够应该怎么办?
@jjm2473
Copy link
Owner

jjm2473 commented Aug 9, 2020

如果重置以后还是不够空间，那就安装不了了，厂商留的分区太小。要扩容的话需要修改分区表，但是这样风险比较高，不建议搞。

@liuyu160
Copy link
Author

谢谢

@liuyu160 liuyu160 reopened this Aug 16, 2020
@liuyu160
Copy link
Author

我有一张闲置的4G mini SD卡，看到网上有个指导https://blog.csdn.net/jacob210/article/details/105443098
但是，操作到这一步的时候不成功. 在第block 这步的时候提示:uci Entry not found 能否指导一下?
转:
接下来要创建 mmcblk0p1 的挂载配置，全自动可以使用以下命令
block detect > /etc/config/fstab;
sed -i s/option$'\t'enabled$'\t''0'/option$'\t'enabled$'\t''1'/ /etc/config/fstab;
sed -i s#/mnt/mmcblk0p1#/overlay# /etc/config/fstab;
cat /etc/config/fstab;

@jjm2473
Copy link
Owner

jjm2473 commented Aug 17, 2020 •
edited
Loading

mmcblk0p1是安卓的系统分区啊，你不能把它挂载到OP里面。z9s的内置emmc已经使用了mmcblk0这个设备，所以你插上去的sd卡的设备路径肯定不是mmcblk0开头的，也就是跟文中不一样的。（x9s在这方面也没什么差别）
这一步还是手动搞吧。

/etc/config/fstab可能已经被你写坏了，建议先重置一次。

1.打开挂载点管理页面，例如 http://192.168.1.10/cgi-bin/luci/admin/system/fstab ；
2.在挂载点这一栏点击下面的添加，勾选启用，UUID选择你的sd卡（应该是sda开头的），挂载点选择“作为外部overlay使用”；
3.点击页面最下面的“保存并应用”
4.应该要重启机器

不保证成功，你先试试吧，z9s没有sd卡槽。

@liuyu160
Copy link
Author

一个个说哈，mini sd卡系统识别出来时mmcblk1p1，实际挂了一个u盘和一个sd卡
1：最一开始时用方法就是打开挂载点管理页面，选择外部overlay，启用挂载点，保存并应用，重启。
2：完成上面操作，出现过两种情况：
1）重启后还是挂载在/mnt/mmcblk1p1，失败，曾经试过用mount命令行挂载，在命令行状态下查询是挂载上了，luci里面没有显示挂到overlay，重启以后就又没了。所以才考虑到上述的全自动挂载命令，我把“sed -i s#/mnt/mmcblk0p1#/overlay# /etc/config/fstab”调成了sed -i s#/mnt/mmcblk1p1#/overlay# /etc/config/fstab; 但是问题是第一条就过不去block detect > /etc/config/fstab;提示uci Entry not found
2）之前手动挂载，就算失败了，重启还是能进入luci后台管理界面的，现在直接是”192.168.8.100 拒绝了我们的连接请求”，完全就不让登录了，重刷官方固件都不行，用reset_op.signed.zip可恢复登录。
3：目前要达到的目的是能多装软件，可知道方法有1，扩展overlay，目前就光折腾这个了还老是失败，2，能不能改opkg.conf 配置，把东西装到别的目录去，不会咋整？：（ ，3，通过cfdisk resize 内置硬盘，再分一个区出来，然后按esir的教程扩容overlay，怕死没敢这么玩，因为”拒绝连接“以后，安卓界面刷官方固件失败，尝试restore刷官方固件，也失败，担心重新分区以后变砖。
附：fstab：

config global
option anon_swap '0'
option anon_mount '0'
option auto_swap '1'
option auto_mount '1'
option delay_root '5'
option check_fs '0'

config mount 'da594c539bebf85c85c5cedf76546f7a'
option enabled '0'
option device '/dev/mmcblk0p1'
option target '/mnt/mmcblk0p1'
option fstype 'ext4'
option options 'noatime'

config mount 'c25d03d9ea273358873eb911bfaab62b'
option enabled '0'
option device '/dev/mmcblk0p2'
option target '/mnt/mmcblk0p2'
option fstype 'ext4'
option options 'noatime'

config mount 'f73de97f7017ca5e9b47ca9c8f633e83'
option enabled '0'
option device '/dev/mmcblk0p3'
option target '/mnt/mmcblk0p3'
option fstype 'ext4'
option options 'noatime'

config mount '2683e38821376d5abec56a774e768b40'
option enabled '0'
option device '/dev/mmcblk0p7'
option target '/mnt/mmcblk0p7'
option fstype 'ext4'
option options 'noatime'

config mount 'E419728F'
option enabled '0'
option device '/dev/sda4'
option target '/mnt/sda4'
option fstype 'vfat'
option options 'utf8,uid=1023,gid=1023,dmask=0007,fmask=0007,shortname=mixed'

config mount '3f31f499b57f45d59983bd698e54ade6'
option enabled '0'
option device '/dev/mmcblk1p1'
option target '/mnt/mmcblk1p1'
option fstype 'ext4'
option options 'noatime'

@jjm2473
Copy link
Owner

jjm2473 commented Aug 18, 2020 •
edited
Loading

如果block detect有问题先别用了，这个命令就是自动识别分区然后写到fstab，为了兼容zidoo的方式，使用了设备名称来挂载，这是不合理的，应该使用uuid。
所以别用block detect了，我前面已经说过这一步需要手动配置，按我说的先试试，配置完重启前发出fstab看看。

@jjm2473
Copy link
Owner

jjm2473 commented Aug 18, 2020 •
edited
Loading

1）重启后还是挂载在/mnt/mmcblk1p1，

说明fstab前面已经配置过mmcblk1p1的挂载路径了，所以就无法再挂载到overlay。

@jjm2473
Copy link
Owner

jjm2473 commented Aug 18, 2020

2，能不能改opkg.conf 配置，把东西装到别的目录去

就算能装到其他地方去，很多软件也依赖文件路径，可能直接不能运行了。
有个项目叫entware的，它把很多软件都改成非默认路径，你可以了解下这个项目。

@jjm2473
Copy link
Owner

jjm2473 commented Aug 18, 2020

改分区还是别搞了，可能以后刷官方包都能变砖

@jjm2473
Copy link
Owner

jjm2473 commented Aug 18, 2020

目前还有一个我在开发中的项目 https://github.com/jjm2473/openwrt/actions ，这个项目比以前稳定，也改了一些底层软件让它更好地跟安卓共存，默认使用uuid挂载。
项目基本开发完成，功能和稳定性都比之前好，但是只在Z9S测试过；有个小睿云的用户刷过X9S的固件，并且刷了这个项目的OP，不能启动。有兴趣的话可以帮我在X9S测试下。

@jjm2473
Copy link
Owner

jjm2473 commented Aug 18, 2020

我看了下flash的布局，有400M的空闲空间，够用了吗

@liuyu160
Copy link
Author

1：flash的布局，有400M的空闲空间够用了。
2：在开发中的项目 https://github.com/jjm2473/openwrt/actions ，下载了OpenWrt_firmware_x9s_202008140126.zip和OpenWrt_firmware_x9s_202008181305.zip在电视盒子升级界面，直接升级提示校验失败，要重新审视升级包，未能到拷贝这步。官方固件是2.1.40。
3：再次尝试手动配置扩容overlay，先用官方固件刷机，重启后会自动挂载如下
Filesystem | Mount Point | Available | Used
/dev/mmcblk1p1 | /mnt/mmcblk1p1 | 3.23 GB / 3.51 GB | 3% (89.42 MB)
尝试2个步骤
1）手工尝试直接编辑挂载点，选择UUID方式，启用，选择外部overlay，保存并应用，返回挂载点界面发现挂载点还是/mnt/mmcblk1p1没有发生变化，重启以后也还是/mnt/mmcblk1p1。没有变化
2）先手工卸载/mnt/mmcblk1p1，再添加挂载点，选择UUID方式，启用，选择外部overlay，重启后还是是/mnt/mmcblk1p1。没有变化

补充第二条，解压缩OpenWrt_firmware_x9s_202008181305.zip，取出当中openwrt-18.06-snapshot-r0-ff75408-realtek-rtd129x-zidoo-x9s-squashfs.ota.zip验证通过，复制升级，重启后死机。目前无法正常进入电视盒子系统。

@liuyu160
Copy link
Author

liuyu160 commented Aug 18, 2020 •
edited
Loading

目前尝试用restore键恢复固件，按指导https://www.znds.com/rom/jq/97751.html 失败，把官方固件https://www.zidoo.tv/Support/downloadList/target/KBiYl1ZANudKKmVViAFMcQ%3D%3D.html

ZIDOO_X9S-v2.1.40-202006102118-ota.zip 直接改名为install.img ，放入fat32 usb根目录，按指导用牙签按住restore，开电源，等了2分钟一直都是开机画面，似乎是没检测到恢复固件。尝试不同的u盘口和sd卡均失败。求教使用restore键恢复的方法或x9s可用任何版本install.img固件。ZIDOO_X9S-v2.1.40-202006102118-ota.zip中有13个文件.b ,.dtb .img .pem不同后缀文件

@jjm2473
Copy link
Owner

jjm2473 commented Aug 19, 2020 •
edited
Loading

ZIDOO_X9S-v2.1.40-202006102118-ota.zip 直接改名为install.img

这一步错了，把ota包改成install.img也无法安装的，需要按照这个链接操作 https://www.zidoo.tv/Support/support_guide/guide_target/1vhOLOoLZ3NKKmVViAFMcQ%3D%3D.html

@liuyu160
Copy link
Author

先按照这个https://www.zidoo.tv/Support/support_guide/guide_target/1vhOLOoLZ3NKKmVViAFMcQ%3D%3D.html
按住restore开电源，识别到恢复进度条，恢复不到1分钟，提示出错，要求重启，重启后，无法通过restore开电源方式找到进度条，电视无信号，U盘灯不亮，换了3过U盘尝试无效，共尝试ZIDOO_X9S-v2.1.1-201808020940-usb.img和install-ZIDOO_X9S-v1.4.12-201708181828-USB.img两个固件均无效
参照https://www.znds.com/tv-1129129-1-1.html，这个无效，此帖中有人救砖成功，我这无效，不知道是什么原因，恢复过程中突然显示失败，我去问问客服看有没有办法。

@jjm2473
Copy link
Owner

jjm2473 commented Aug 20, 2020

额，官方的强刷教程也无效吗。
电视无信号估计bootloader都已经损坏了，或者主板烧了。盒子前面板还有任何灯会亮吗？

我有办法救砖，但是需要拆机连接ttl，还需要原本flash的前75M备份

@liuyu160
Copy link
Author

正常启动时绿灯，显示boot，按住restore启动时红灯，显示UP__，就没反应了。我咨询了客服，不插U盘，按restore上电双清无效，TTL链接我没工具，也没flash备份，看样子自己折腾是没戏了。后面打算返厂维修。

@jjm2473
Copy link
Owner

jjm2473 commented Aug 20, 2020

哦，这个问题比较常见，在论坛有国外网友也遇到了，其实是官方固件的bug。
刷机过程中先把活跃分区标记为损坏，刷机成功以后再恢复标记。原本设计成这样是为了刷机失败还能进入备用recovery系统（flash中实际上有两套recovery），但是这些电视盒出厂时备用系统的分区表是错误的，所以无法进入备用系统，于是刷机失败以后就两套系统都进不去了 😢 。

@liuyu160
Copy link
Author

我看别人分享的救砖经验，N1盒子有短接pin脚的，路由器有拆下flash芯片的，还有用USB转TTL接口的，我短期内无法返厂送修，不知道你说的拆机链接TTL，是不是需要专用转接线的？如果是短接pin脚的，找到刷机包还能再试试，否则现在就只能暂时把它埋了。

@jjm2473
Copy link
Owner

jjm2473 commented Aug 20, 2020

我写了个Z9S/Z10的TTL连接，X9S应该类似 https://jjm2473.github.io/nas/2020/07/07/z9s-dev.html

需要购买这种线 https://item.taobao.com/item.htm?id=6880410745

USB转TTL的模块比较容易找，我用的是这个 https://detail.tmall.com/item.htm?id=601567141914

@jjm2473
Copy link
Owner

jjm2473 commented Aug 20, 2020

如果你拆机的话，拆完把主板照片发我看看

@jjm2473
Copy link
Owner

jjm2473 commented Aug 20, 2020

论坛有UART（TTL）连接照片 http://forum.zidoo.tv/index.php?threads/how-to-flash-zidoo-x9s-unit.2959/page-11#post-48955

@jjm2473
Copy link
Owner

jjm2473 commented Aug 24, 2020

@liuyu160 如果你在深圳，而且不介意拆机的话，我可以帮你救砖

@liuyu160
Copy link
Author

现在不在国内，所以说不方便弄工具，等我回去以后，预计要1-2个月以后了，我给你帮忙试试吧。

@jjm2473
Copy link
Owner

jjm2473 commented Aug 24, 2020

好。其实那个固件已经可以在X9S上运行了，之前不能运行是因为Openwrt官方的mksquashfs有bug，导致生成的镜像包含特殊参数，X9S又不能识别这些参数，所以启动不了。

@liuyu160
Copy link
Author

我咨询了一下厂商技术售后，他帮忙问了一下他们的技术人员，说没有Flash 前75M 的备份,另外我今天打开了盒子.你看看如果我能弄到工具,你能远程指导我弄吗?
8
9

@jjm2473
Copy link
Owner

jjm2473 commented Aug 25, 2020

可以远程。不过我用的是mac，可能还要找下合适的远程协助软件，实在找不到视频指导一下也可以的。

没有备份的话，也可以先尝试通过UART把损坏标记去掉，一般都能启动了，然后按官方强刷教程就行。

你先准备好设备和软件吧，可以参考这个教程，但是千万别刷uboot： https://bbs.nas66.com/thread-5553-1-1.html

@liuyu160
Copy link
Author

买你说的这个线 https://item.taobao.com/item.htm?id=6880410745
和我自己找到这个板https://detail.tmall.com/item.htm?id=607537557979&spm=a1z0k.6846577.0.0.16e07c9cx9d48T&_u=t2dmg8j26111
你看可以吗？你用的板功能比较多，这次用不上。还有没有其他要准备的？

@jjm2473
Copy link
Owner

jjm2473 commented Aug 26, 2020

你看下这个教程吧 https://jjm2473.github.io/nas/2020/08/26/rtd129x-brick.html ，如果不知道怎么开始，可以加我微信

@liuyu160
Copy link
Author

上一条留言的板子可以吗？我给你的邮箱留言了

@jjm2473
Copy link
Owner

jjm2473 commented Aug 26, 2020

板子应该可以的，有ttl转usb就行

@jjm2473
Copy link
Owner

jjm2473 commented Aug 27, 2020

我看论坛有不需要TTL的方法 http://forum.zidoo.tv/index.php?posts/28733

@liuyu160
Copy link
Author

这个方法没用，已经试过了。没有任何反应

@jjm2473
Copy link
Owner

jjm2473 commented Aug 28, 2020

那应该是uBoot的版本不一样，我的Z9S也不支持直接从U盘恢复

@liuyu160
Copy link
Author

liuyu160 commented Sep 5, 2020 •
edited by jjm2473
Loading

已经弄到了USB转TTL，按照https://jjm2473.github.io/nas/2020/08/26/rtd129x-unbrick.html恢复FWTABLE签名做了一遍，1至10步的内容和教程一模一样。然后按官方强刷还是停留在BOOT，按restore 停留在UP，和之前一样。尝试下一步UART+U盘刷机，help命令后没有usb，fatload和boot这几个命令，做不下去了。望指导

Xshell 7 Beta (Build 0035)
Copyright (c) 2020 NetSarang Computer, Inc. All rights reserved.

Type `help' to learn how to use Xshell prompt.
[C:\~]$ 

Connecting to COM3...
Connected.


C1:80000000
C2
?
C3hswitch frequency to 0x00000046
frequency divider is 0x00000080
switch frequency to 0x00000046
frequency divider is 0x00000004
switch to SDR 8 bit
switch bus width to 0x00000008 bits success

hwsetting size: 000005F4
C4
f 
5-5
s_f
5-5-2
Goto FSBL: 0x10100000
switch frequency to 0x00000046
frequency divider is 0x00000080
switch frequency to 0x00000046
frequency divider is 0x00000004
emmc_cid[3] = 0x89656759 emmc_cid[2] = 0xCFA80352 emmc_cid[1] = 0x3444544A emmc_cid[0] = 0x41000115
switch bus width to 0x00000008 bits success
DEVICE_TYPE = 00000057
emmc_sec_count = 01D1F000
switch speed to 0x00000002 success
switch frequency to 0x000000A6
frequency divider is 0x00000000
1st TX_window = 0xFFFFFFFE
1st phase TX VP0= 0x00000010
RX_window = 0xFFFFFE07
phase RX VP1= 0x00000015
Welcome to FSBL ...
[FSBL] Warm Boot: 0x00000000
[FSBL] Secure: 0x0000BEEE
[FSBL] Flash Type: 0x00000002
[FSBL] DCache Enable: 0x00000000
[FSBL] SVP = N
********** FW_TYPE_GOLD_TEE **********
    FW Image to 0x10200000, size=0x0007A6A0 (0x1027A6A0)
    FW Image fr 0x000A7400 
********** FW_TYPE_GOLD_BL31 **********
    FW Image to 0x10120000, size=0x000052A0 (0x101252A0)
    FW Image fr 0x00121C00 
********** FW_TYPE_BOOTCODE **********
    FW Image to 0x00020000, size=0x00074F60 (0x00094F60)
    FW Image fr 0x00020800 
md copy audio bin
VERBOSE: bl31_setup
NOTICE:  BL31: v1.2(debug):a2d698a
NOTICE:  BL31: Built : 15:00:03, Nov 29 2016
INFO:    BL31: Initializing runtime services
INFO:    Start to init service std_svc 
INFO:    Finish to init service std_svc 
INFO:    Start to init service opteed_fast 
INFO:    Finish to init service opteed_fast 
INFO:    BL31: Initializing BL32
INFO:    TEE-CORE: TEE OS v2.1
INFO:    TEE-CORE: Skipping to check tee os version.
INFO:    TEE-CORE: Initializing (a3ddf6c-dev #1 Mon Sep 18 11:29:08 CST 2017 aarch64)
MESSAGE: [0x0] TEE-CORE:tee_otp_get_hw_unique_key:49: ************************     tee_otp_get_hw_unique_key chip id: 30000
MESSAGE: [0x0] TEE-CORE:tee_otp_get_hw_unique_key:54: ************************     tee_otp_get_hw_unique_key used Kf
INFO:    TEE-CORE: teecore inits done
INFO:    Core_0 TEESMC_OPTEED_RETURN_ENTRY_DONE 
INFO:    Core_0 got optee_vectors (0x1020093c)
INFO:    BL31: Initialized BL32
INFO:    EXIT BL31
INFO:    bl31_to_kernel: kernel_resume_entry = 0x1e000
INFO:    bl31 jumps to EL2: LK entry 

welcome to lk/MP

boot args 0x2 0x0 0x0 0x0
INIT: cpu 0, calling hook 0x52ee8 (version) at level 0x3ffff, flags 0x1
version:
	arch:     ARM64
	platform: RTD1295
	target:   RTD1295
	project:  RTD1295
	buildid:  EAE7790_2018年_08月_01日_星期三_15:24:42_CST
initializing heap
calling constructors
initializing mp
initializing threads
initializing timers
initializing ports
creating bootstrap completion thread
top of bootstrap2()
INIT: cpu 0, calling hook 0x51930 (sysparam) at level 0x70000, flags 0x1
INIT: cpu 0, calling hook 0x653bc (lwip) at level 0x70000, flags 0x1
creating bootstrap completion thread for cpu 1
creating bootstrap completion thread for cpu 2
creating bootstrap completion thread for cpu 3
initializing platform
rtd129x_pwm_pin_mux default value 0
PLL_EMMC1 = 0x00000003
switch frequency to 0x46, divder to 0x80
switch frequency to 0x46, divder to 0x4
switch_bus: width = 0x00000002
switch speed to 0x2 success 
switch frequency to 0xa6, divder to 0x0
PLL_EMMC1 = 0x00001583
switch erase_group_def to 0x1 success 
sec_count = 0x1d1f000 
Erase Unit Size = 512KB * 0x1 
factory_init, factory size:0x400000
MMC
Factory: pp:0, seq#:0x7b1, size:0x6c00
Bring UP slave CPUs
ViVEVEEnRRRBBiBOOOStSESEEi:::  a bbblll33l1i1__3szsg 1titu_usnpep

ICrCEpNOOaTTI
:B1 :N:gO E eTBI:CtLE 3 
     LI 3vN 11B:I. L2(T3dv1e::b1 u. g2v(c)d1:.pe2bacd:62d) d:e0,b6u9a8 ga2)
l6C9aaN2O9T8lIad
gBCLiEN:O8Tn Ia 
     EN:O3Th I1 :oC BE:oL B3uk i1B: L l03Btux1i 3l:: 5t1  5B::au0 i1e05:l08:3t0  ,:0 :( 0Nr3o1v85 ,: 12 a0N6o: v2800 )1239 6 ,
l2e9 o1tvI6N  
 0  vI Fe2O0NF:1l O6  :
    xI9NB0 F0L 0O30 :,1B  :Lf  l3a Ig1 sn:B i0tLx i1nIa
  lir:i8z1 t6iI8in_naiginl ititrziiuaialnniltzgiei e m5re2iu9 n6ns gt
  irrmvieun cestsierm
vi I sNceFersO:
    IceN  FsSO
t: aINr  tFO  St: ota  r in t Sitttoa sr iter nitvid_e ceisen sritvt idsc_eesr vsvci tc
_s I svsNFtcd O:
   I vN c  FOF
:inI  NisF  Oh :Fi to ni  i shFnii ttnio s shiern tcd_to  cesine risvttd ics_eserv cvs it
_s eI ssNvtFcO d:
O:tvI  NcF  S
    Ia NrtF  O t:St o  ar in ti Sttt oar seit nrvit_ptc  ise enroivpt ticeseee drvo_ipfatcees et do
fa fIeaseNFdt_ O:
   I sNt  F FO
i: IniN  FshO F: t in o  is inhFi ittnio s shiern t_ptto  cesine oirvtpt icseeee rdvo_ipfatcees et do
fa fIaeNestdFO _:
O:L Is NtF  B
   3I  N1:F  O I:BL ni 31 ti : BaIlL3iniz1:itin Igag iiBizLti3in2al
   IzBLiNFn32gO: 
Co:LIN3  2FO
   r IN e_ FO 2C : TorE  Ee S_C3MC orT_OEe_EPT1SM ETEC_DEE_OPRSMETETC_UEDROPN_R_TEEETNEDTU_RRYNRE__DETUNONTRNRE Y_E_
: OOINNRYEFO _D
OBL INEN  F 
   :3I  N1:F  O B:In L3 it 1: iaB ILli3ni1ze:ti d IalnBLii3ztie2ad
: BIizNLe3FO2d 
OEX IL3N  F2
   :I IT NF  B O:LEX3  1IT
   EIBLNXI3FTO1 :
OblIL3N  F1
   :I3  1NF_  tO:obl_  k31e  r_tnbleo_l31:ke _tkrneo_relnk:eelr kn_reerles:ne umkl_ee_rrenenesultr_myexy1 =esun 0tmerx_1y een0= 0tr00
 6  eI= N00F0xrO:801
E  Kj81 :N ebFR0lEO0A3:L01T
       R umI bTNFlLp8O31s:61 8   j @  0tuxbl9mo8310:t1 p6L0js02u0 m
a p osRL e KaE ltLteoe2nk : tEG rBLLEy2 K F:
y mLi eKlyn e tCrntoy rnt
l ro
 ler mcfg = 0024
netif en ip 192.168.100.1 netmask 255.255.255.0 gw 192.168.100.254
calling apps_init()
vid=31,20,19,18,17,16,5,4,3,2,1,
------------tmp/factory/video_rpc.bin found
Sink changed, skip one step
tv_system=25 mode=1
==== DP not detect ====
Set ACPU share memory
------------tmp/factory/000BootParam.h found
[logo]src w/h=1280/720 dst w/h=1280/720

*** ESC Pressed ***

EEPROM: SIZE=16384, ADRESS_MODE=2, PAGE_WRITE_SIZE=64, BUFFER_SIZE=16
starting app rtkboot
Enter Console...
entering main console loop
Realtek> starting app eeprom
starting app pmic
pmic_entry: set DCDC force PWM
gmt_testing returns 00
INIT: cpu 2, calling hook 0x22808 (slave_cpu_spin) at level 0x3ffff, flags 0x2
INIT: cpu 1, calling hook 0x22808 (slave_cpu_spin) at level 0x3ffff, flags 0x2
INIT: cpu 3, calling hook 0x22808 (slave_cpu_spin) at level 0x3ffff, flags 0x2
help
command list:
	net             : net toolbox
	page_alloc      : page allocator debug commands
	heap            : heap debug commands
	hexdump         : hexdump memory region
	help            : this list
	test            : test the command processor
	history         : command history
	bio             : block io debug commands
	novm            : page allocator (for devices without VM support) debug commands
	reboot          : soft reset
	poweroff        : powerdown
	version         : print version
	sysparam        : commands for manipulating system parameters
	dw              : display memory in words
	dh              : display memory in halfwords
	db              : display memory in bytes
	mw              : modify word of memory
	mh              : modify halfword of memory
	mb              : modify byte of memory
	fw              : fill range of memory by word
	fh              : fill range of memory by halfword
	fb              : fill range of memory by byte
	mc              : copy a range of memory
	crash           : intentionally crash
	stackstomp      : intentionally overrun the stack
	mtest           : simple memory test
	chain           : chain load another binary
	sleep           : sleep number of seconds
	sleepm          : sleep number of milliseconds
	crc16           : crc16
	crc32           : crc32
	adler32         : adler32
	bench_cksum     : benchmark the checksum routines
	aes_test        : test AES encryption
	aes_bench       : bench AES encryption
	threads         : list kernel threads
	threadstats     : thread level statistics
	threadload      : toggle thread load display
	loady           : Y-MODEM through UART
	fdt             : Flat device tree commands
	pmic            : GMT-G2227 PMIC commands
	keyset          : for uart mp tool write secure key  to factory
	uart_write      : for uart mp tool write mac or sn
	factory         : FACTORY sub system
	eeprom          : EEPROM commands
	fastboot        : fastboot command
	boot            : platform boot command
	cache           : cache operation
	boot_part       : r/w boot partition x
	pwm             : Control PWM 0,1,2,3
	rpmb            : do some rpmb operation
	chip            : detect soc version
	bdinfo          : Board information
	rtknand         : rtk nand commands
	rtkspi          : rtk spi commands
	rtkemmc         : rtk emmc commands
Realtek>

@liuyu160
Copy link
Author

liuyu160 commented Sep 5, 2020 •
edited by jjm2473
Loading

http://forum.zidoo.tv/index.php?threads/how-to-flash-zidoo-x9s-unit.2959/page-8
第142楼有个附件如下，他的内容中有U-Boot 2012.07 svn.161586，还有goru - start rescue linux from usb命令，我的都没有
不知道原因？所以按她的这个也做不了。

C1:80000000
C2
?
C3hswitch frequency to 0x00000046
frequency divider is 0x00000080
switch frequency to 0x00000046
frequency divider is 0x00000004
switch to SDR 8 bit
switch bus width to 0x00000008 bits success

hwsetting size: 000005CC
C4
f
5-5
Goto FSBL: 0x10100000
<=============================================>
fsbl_main: sys_secure_type = 0x0000BEEE
fsbl_main: sys_boot_type = 0x00000002
fsbl_main: sys_boot_enc = 0x00000000
fsbl_main: sys_bisr_done = 0x00000000
sys_hwsetting_size:00000600
sys_bootcode_size:000C61C0
sys_secure_fsbl_size:00010B80
sys_secure_os_size:000727C0
sys_bl31_size:00005040
sys_rsa_key_fw_size:00000000
sys_rsa_key_tee_size:00000000
sys_rescue_size:00026448

HwSetting:
hwsetting_blk_no:00000100
hwsetting_total_size:00000680
hwsetting_blk_count:00000004

Bootcode:
bootcode_blk_no:00000104
bootcode_total_size:000C61E0
bootcode_blk_count:00000631

FSBL:
secure_fsbl_blk_no:00000735
secure_fsbl_total_size:00010BA0
secure_fsbl_blk_count:00000086

TEE OS:
secure_os_blk_no:000007BB
secure_os_total_size:000727E0
secure_os_blk_count:00000394

BL31:
bl31_blk_no:00000B4F
bl31_total_size:00005060
bl31_blk_count:00000029

RSA Key Fw:
rsa_key_fw_blk_no:00000B78
rsa_key_fw_total_size:00000000
rsa_key_fw_blk_count:00000000

RSA Key TEE:
rsa_key_tee_blk_no:00000B78
rsa_key_tee_total_size:00000000
rsa_key_tee_blk_count:00000000

Rescue:
rescue_blk_no:00000B78
rescue_total_size:00026468
rescue_blk_count:00000133
********** FW_TYPE_GOLD_TEE **********
fwInfo->fwType: 00000023
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 10200000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 000F7600
fwInfo->dataSize: 000727E0
body_size:000727C0
flash_unit_no:000007BB
flash_unit_count:00000394
real_size:0007278C
sha256 Fw
********** FW_TYPE_GOLD_BL31 **********
fwInfo->fwType: 00000028
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 10120000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 00169E00
fwInfo->dataSize: 00005060
body_size:00005040
flash_unit_no:00000B4F
flash_unit_count:00000029
real_size:00005018
sha256 Fw
********** FW_TYPE_BOOTCODE **********
fwInfo->fwType: 00000001
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 00020000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 00020800
fwInfo->dataSize: 000C61E0
body_size:000C61C0
flash_unit_no:00000104
flash_unit_count:00000631
real_size:000C6180
sha256 Fw
j bootcode jump address:00020000
64b


U-Boot 2012.07 svn.161586    (Jan 23 2018 - 15:58:00)

CPU  : Cortex-A53 quad core - AARCH32
Board: Realtek QA Board
DRAM:  0 Bytes
Watchdog: Disabled
Cache: Enabled
Non-Cache Region: 1 MB@0x07900000
MMC:   RTD1295 eMMC: 0
SD device number = 1
rsp[0]=0x15010041,
                       rsp[1]=0x57504433,
                       rsp[2]=0x5200dbde,
                       rsp[3]=0xf4e414ed
rsp[0]=0xd0270132,
                       rsp[1]=0x0f5903ff,
                       rsp[2]=0xf6dbffef,
                       rsp[3]=0x92404009
mmc->version=0x00010000
version=0x00000004
[LY] cardtype=57, mmc->card_caps=0f
[LY] freq = 00464388, clk diver = 00000080
[LY] speed up emmc at HS-200
[LY] HS-200 bus width=2
[LY] mmc->boot_caps = 20b
TEMP TX_WINDOW=0x7fffffff, TX_best=0xf
RX_WINDOW=0xff87ffff, RX_best=0x4
TX1_WINDOW=0x7fffff80, TX_best=0x12
[LY] hs200 : 0
[HC] WPG_SIZE = 8388608
Device: RTD1295 eMMC
Manufacturer ID: 15
OEM: 100
Name: AWPD3
Tran Speed: 5f5e100
Rd Block Len: 512
MMC version 4.0
High Capacity: No
Capacity: 14.6 GiB
Bus Width: 8-bit
Speed: HS200
Factory: MMC
Factory: pp:1, seq#:0x3, size:0x20400
------------can't find tmp/factory/000BootParam.h
HDMITx_HPD=False
------------can't find tmp/factory/video_rpc.bin
tv_system=25 mode=1
In:    serial
Out:   serial
Err:   serial
Net:   Realtek PCIe GBE Family Controller mcfg = 0024
dev->name=r8168#0
Hit Esc or Tab key to enter console mode or rescue linux:  0
------------can't find tmp/factory/recovery

Press Esc Key
dcdc1_mode [0x07: shift: 6 length: 2]
gmt_testing returns 00
cur_val: [0x00] auto
new_val: [0x02] force_pwm
dcdc2_mode [0x07: shift: 2 length: 2]
cur_val: [0x00] auto
new_val: [0x02] force_pwm
dcdc3_mode [0x08: shift: 6 length: 2]
cur_val: [0x00] auto
new_val: [0x02] force_pwm
dcdc5_mode [0x09: shift: 6 length: 2]
cur_val: [0x00] auto
new_val: [0x02] force_pwm
dcdc6_mode [0x09: shift: 2 length: 2]
cur_val: [0x00] auto
new_val: [0x02] force_pwm

Enter console mode, disable watchdog ...

Realtek> help
Unknown command 'help' - try 'help'
Realtek> help
b2ndbc  - load 2nd stage bootcode
bdinfo  - print Board Info structure
bootm   - boot application image from memory
bootr   - boot realtek platform
dcache  - enable or disable data cache
eeprom  - EEPROM sub-system
env     - environment handling commands
factory - FACTORY sub system
fastboot- use USB Fastboot protocol
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
fdt     - flattened device tree utility commands
gettime - get timer val elapsed
gg      - go 0x1500000

go      - start application at address 'addr' or start running fw
goru    - start rescue linux from usb
help    - print command description/usage
icache  - enable or disable instruction cache
keyset  - keyset - write keyset file into factory area
loady   - load binary file over serial line (ymodem mode)
md      - memory display
mmc     - MMC sub system (patch for rtd299x)
mtest   - simple RAM read/write test
mtest2  - simple RAM read/write test
mw      - memory write (fill)
ping    - send ICMP ECHO_REQUEST to network host
pmic    - GMT-G2227 PMIC commands
reset   - Perform RESET of the CPU
rtkemmc - RTK EMMC functions
saveenv - save environment variables to persistent storage
sd      - SD sub system
source  - run script from memory
tftp    - download image from TFTP server
tftpput - TFTP put command, for uploading files to a server
tt      - tftp 0x1500000 dvrboot.exe.bin

uart_write- for uart mp tool burn mac and sn key

unzip   - unzip a memory region
usb     - USB sub-system
Realtek> erase -m
Unknown command 'erase' - try 'help'
Realtek> factory
factory - FACTORY sub system

Usage:
factory read path
factory write path addr length
factory delete path
factory save
factory reset
factory info
factory list
Realtek> factory info
****** dump factory info ******
boot_flash_type    = MMC
factory_buffer     = 0x07000000
factory_buffer2    = 0x07200000
factory_tarsize    = 0x00020400
factory_current_pp = 0x00000001
factory_seq_num    = 0x00000003
Realtek> factory list
tmp/factory/
tmp/factory/env.txt
Realtek> factory read path
path: file not found
Realtek> factory write path addr length
Realtek> factory save
[FAC] factory_save: MMC
[FAC] Save to eMMC (blk#:0x1100, buf:0x07000000, len:0x20c00)
[FAC] Save to eMMC (seq#:0x4, pp:0)
Realtek> factory read path
path: 0 bytes at 0x07020600
Realtek> factory write path addr length
Realtek> factory info
****** dump factory info ******
boot_flash_type    = MMC
factory_buffer     = 0x07000000
factory_buffer2    = 0x07200000
factory_tarsize    = 0x00020600
factory_current_pp = 0x00000000
factory_seq_num    = 0x00000004
Realtek> factory list
tmp/factory/
tmp/factory/env.txt
Realtek> factory read path
path: 0 bytes at 0x07020600
Realtek> goru
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
USB1:   USB XHCI 1.10
scanning bus 1 for devices... Unknown request , typeReq = 0x200c
1 USB Device(s) found
USB2:   USB XHCI 1.10
scanning bus 2 for devices... Unknown request , typeReq = 0x200c
1 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found

1: Hub,  USB Revision 2.0
 - u-boot EHCI Host Controller
 - Class: Hub
 - PacketSize: 64  Configurations: 1
 - Vendor: 0x0000  Product 0x0000 Version 1.0
   Configuration: 1
   - Interfaces: 1 Self Powered 0mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 1
     - Class Hub
     - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

2: Hub,  USB Revision 2.0
 -  USB2.0 Hub
 - Class: Hub
 - PacketSize: 64  Configurations: 1
 - Vendor: 0x05e3  Product 0x0610 Version 50.152
   Configuration: 1
   - Interfaces: 1 Self Powered Remote Wakeup 100mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 1
     - Class Hub
     - Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms
     - Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms

3: Mass Storage,  USB Revision 2.0
 -          silicon-power 11010892E6B20800B17E0179
 - Class: (from Interface) Mass Storage
 - PacketSize: 64  Configurations: 1
 - Vendor: 0x13fe  Product 0x3600 Version 1.0
   Configuration: 1
   - Interfaces: 1 Bus Powered 200mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 2
     - Class Mass Storage, Transp. SCSI, Bulk only
     - Endpoint 1 In Bulk MaxPacket 512
     - Endpoint 2 Out Bulk MaxPacket 512

4: Hub,  USB Revision 3.0
 - u-boot XHCI Host Controller
 - Class: Hub
 - PacketSize: 9  Configurations: 1
 - Vendor: 0x0000  Product 0x0000 Version 1.0
   Configuration: 1
   - Interfaces: 1 Self Powered 0mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 1
     - Class Hub
     - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

5: Hub,  USB Revision 3.0
 - u-boot XHCI Host Controller
 - Class: Hub
 - PacketSize: 9  Configurations: 1
 - Vendor: 0x0000  Product 0x0000 Version 1.0
   Configuration: 1
   - Interfaces: 1 Self Powered 0mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 1
     - Class Hub
     - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms


USB device 0: Vendor:          Rev: PMAP Prod: silicon-power
            Type: Removable Hard Disk
            Capacity: 3824.0 MB = 3.7 GB (7831552 x 512)
reading rescue.emmc.dtb
Filesize: 64881 bytes
64881 bytes
Size: 64881, got: 64881

64881 bytes read (take 59ms)
Loading "rescue.emmc.dtb" to 0x02100000 is OK.

reading emmc.uImage
Filesize: 16346112 bytes
16346112 bytes
Size: 16346112, got: 16346112

16346112 bytes read (take 940ms)
Loading "emmc.uImage" to 0x03000000 is OK.

reading rescue.root.emmc.cpio.gz_pad.img
Filesize: 12582912 bytes
12582912 bytes
Size: 12582912, got: 12582912

12582912 bytes read (take 741ms)
Loading "rescue.root.emmc.cpio.gz_pad.img" to 0x02200000 is OK.

reading bluecore.audio
Filesize: 3480696 bytes
3480696 bytes
Size: 3480696, got: 3480696

3480696 bytes read (take 245ms)
Loading "bluecore.audio" to 0x01b00000 is OK.
Start Audio Firmware ...
A#[ FWWA]RkNyIlNiGn _rbtrki_ncga lulp_ bhowostemt tAidndg
wFW_FMiEnMiRsShV :k yFlDiTn__EbRrRi_nBgA_DtMeAmGpI Ch
 setting
[+][AO][aio_HWEnable]
[AO]aio_CRTOn:
SYS_CLOCK_ENABLE1 [ 0x9800000c]: 0x13fec571
SYS_CLOCK_ENABLE2 [ 0x98000010]: 0x58ffe416
SYS_SOFT_RESET1 [ 0x98000000]: 0xbfda1355
SYS_SOFT_RESET4 [ 0x98000050]: 0x0000801f
[AO]ao_SetDACAnalogOn:
TVE_VDAC_CTR1 [ 0x980183a0]: 0xa86c0280
AIO_O_ACANA_GCTL1 [ 0x98006604]: 0x24951504
8IO_I_ACANA_ADC_EGXCPTOLR2T  [E N0Vx 9A8T0 006x611000]0:0 000x08
e0rat3ka_0p0r
 lAoIaOd__Ib_oAoDtCi_mTaCgOeNs _[e m0mxc9 8:0 0l6o6afdc ]U:- B0oxo2t2 16f40 0  m0r0o
  A0IxO0_0I0_2A8D1C2_5T CtOoN  0[x 001x590800000606 fwci]t:h  0sxi2z2e1 f0fxf  00001
A0[0-0]0[
 O][aio_HWEnable]
[Audio]SetTickRate  0x000000c8
[ACPU] Set protect, start: 0x00000000 end: 0x00001000 moduleid:6
HDMI Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP

SPDIF Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP

Force 2ch Format: DTS DTSHD AC3 DDP MLP AAC WMAPRO



[AO][InitHDMIVideoType]HDMI Frequecny 148, resolution 25


@@@@@@@One Step TV System magic number = 0xc0de0bee, addr = 0xa001f800@@@@@@@
[AUDIO WARNING] ERR UNCACHEABLE_VADDR  0xb8071200 @  0x81b2e538

@@@@@@@@@ boot_info->tv_sys.interfaceType 0
_a@VIDEO_RPC_VOUT_ToAgent_ConfigTVSycsopteym__20nd__svbco]ottylpoea d0e!r
c HndD_MIruOfnf : =  s0r
ze0[Vx0O]1v50o-00>i0s0,_h ddsmit_:0ofxf00_c0l21oc0k00_o,n s:0i
C_[:@0x@V0I00DEcO50_R00P
a VJuOUmTp_iTnog Agteo nt2_nCdo nbofiotglViodaedoerSt.a.n.d
 rd_0_svc]
[VO_SetVideoStandard]st 25 p 1 1 0
[VO_SetVideoStandard]ped 1 data0  0x00000004 data1  0x00000000
[VO_SetVideoStandard]HDMIoff 0 is_tve_on 1 user_cvbs_off 0
lvds.format 0 port_setting  0x00000381 lvds_wb 0
[VO setTVStandard 25 3D 0 0]

(TVE) TVE_DAC_mode 0,cmd->enProg 1!!
TV_NTSC_J
~~comp 0, ch2 1, mode_3D 0!!
~~comp 0, ch2 1, mode_3D 0!!
~~TVE standard#
SetVideoStandard return!
[@@VIDEO_RPC_VOUT_ToAgent_ConfigHdmiInfoFrame_0_svc]

(VO_ConfigHDMI_InfoFrame) L:236, is_hdmi_plugin 1, hdmiMode 1!!Mode 1 dataByt  e1  0x00000000  0x00000000  0x00000000
dataByte4  0x00000000  0x00000000 int0  0x00000001

(HDMI_3D) mode 1, HDMI_gen 1, En_3D 0, Format_3D 0 scramble:0!!clearDynamicRa  ngeMasteringPkt()

 go back SET_HDMI!!boot_info  0xa0000000 magic  0xfffeedff en 227
[AO][_AO_if_video_HDMI_mode]HDMI not enabled
[AO][+]_AO_setup_default_audio_infoframe
[AO][--]_AO_hdmi_disable(0)
[AUDIO WARNING]
[AO][_AO_hdmi_disable]do nothing, HDMI not enable  0x00000000  0x00000001
Audio_Channel_Count 1 :2CH, audio_layout:0
HDMI_Frequency 148 :1080p50,1080p60
Sampling_Frequency 3 :48K
CTS = 148500, N = 6144
[+][HDMI_gen_audio_infoframe]
CA:2CH: L,R
[-][HDMI_gen_audio_infoframe]
SYS_PLL_PSAUDA1 [ 0x98000130]: 0x0050022d
[AO][++]_AO_hdmi_enable(0)
[AUDIO WARNING]
[AO][_AO_hdmi_enable]do nothing, HDMI not enable  0x00000000  0x00000001
[AO][-]_AO_setup_default_audio_infoframe


U-Boot 2015.07-gdc68be6-dirty (Nov 30 2016 - 09:54:29 +0800)

CPU  : Cortex-A53 Quad Core
Board: Realtek QA Board
DRAM:  1 GiB
mapping memory 0x20000000-0x40000000 non-cached
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
rtk_plat_set_fw not port yet, use default configs
## Flattened Device Tree blob at 02100000
   Booting using the fdt blob at 0x2100000
   reserving fdt memory region: addr=0 size=30000
   reserving fdt memory region: addr=1f000 size=1000
   reserving fdt memory region: addr=30000 size=d0000
   reserving fdt memory region: addr=3100000 size=6000000
   reserving fdt memory region: addr=1b00000 size=400000
   reserving fdt memory region: addr=3000000 size=100000
   reserving fdt memory region: addr=1ffe000 size=4000
   reserving fdt memory region: addr=10000000 size=14000
   reserving fdt memory region: addr=1fc00000 size=1000
   reserving fdt memory region: addr=22000000 size=17bb000
   reserving fdt memory region: addr=2200000 size=c00000
   Using Device Tree in place at 0000000002100000, end 0000000002112d70
Bring UP slave CPUs
Jump to BL31 entrypoint
VERBOSE: bl31_setup
NOTICE:  BL31: v1.2(debug):1522ab7
NOTICE:  BL31: Built : 16:33:46, Oct 13 2016
INFO:    BL31: Initializing runtime services
INFO:    Start to init service std_svc
INFO:    Finish to init service std_svc
INFO:    Start to init service opteed_fast
INFO:    Finish to init service opteed_fast
INFO:    BL31: Initializing BL32
INFO:    TEE-CORE: TEE OS v2.1
INFO:    TEE-CORE: tee os version : 1
INFO:    TEE-CORE: OTP tee os version : 0
INFO:    TEE-CORE: chip_rev_id : 10000
INFO:    TEE-CORE: check golden fw : 10050044
INFO:    TEE-CORE: Do not supoort check tee os version in this chip.
INFO:    TEE-CORE: Initializing (828cd34-dev #1 Thu Dec  8 16:13:14 CST 2016   aarch64)
MESSAGE: [0x0] TEE-CORE:tee_otp_get_hw_unique_key:46: ***********************  *     tee_otp_get_hw_unique_key chip id: 10000
INFO:    TEE-CORE: teecore inits done
INFO:    Core_0 TEESMC_OPTEED_RETURN_ENTRY_DONE
INFO:    Core_0 got optee_vectors (0x1020093c)
INFO:    BL31: Initialized BL32
INFO:    EXIT BL31
INFO:    bl31_to_kernel: kernel_resume_entry = 0x1e000
INFO:    bl31 jumps to EL2: kerenl entry
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.17-g26a590a-dirty (maifanghao@ZidooServer) (  gcc version 4.9.4 (OpenWrt/Linaro GCC 4.9-2015.06 r47591) ) #8 SMP PREEMPT Th  u Aug 17 15:34:28 CST 2017
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] alternatives: enabling workaround for ARM erratum 845719
[    0.000000] DT: cma-improve=0
[    0.000000] earlycon: Early serial console at MMIO32 0x98007800 (options '  ')
[    0.000000] bootconsole [uart0] enabled
WARNING: NO PSCI SERVICE: 0x84000000
WARNING: NO PSCI SERVICE: 0x84000006
WARNING: NO PSCI SERVICE: 0x8400000a
WARNING: NO PSCI SERVICE: 0x8400000a
VVVEEERRRBBBOOOSSSEEE:::   bbblll333111___ssseeetttuuuppp


NNNOOOTTTIIICCCEEE:::      BBBLLL333111:::   vvv111...222(((dddeeebbbuuuggg))  ):::111555222222aaabbb777


NNNOOOTTTIIICCCEEE:::      BBBLLL333111:::   BBBuuuiiilllttt   :::   111666::  :333333:::444666,,,   OOOcccttt   111333   222000111666


IIINNNFFFOOO:::            BBBLLL333111:::   IIInnniiitttiiiaaallliiizzziiinn  nggg   rrruuunnntttiiimmmeee   ssseeerrrvvviiiccceeesss


IIINNNFFFOOO:::            SSStttaaarrrttt   tttooo   iiinnniiittt   ssseeerr  rvvviiiccceee   ssstttddd___sssvvvccc


IIINNNFFFOOO:::            FFFiiinnniiissshhh   tttooo   iiinnniiittt   sssee  errrvvviiiccceee   ssstttddd___sssvvvccc


IIINNNFFFOOO:::            SSStttaaarrrttt   tttooo   iiinnniiittt   ssseeerr  rvvviiiccceee   ooopppttteeeeeeddd___fffaaasssttt


IIINNNFFFOOO:::            FFFiiinnniiissshhh   tttooo   iiinnniiittt   sssee  errrvvviiiccceee   ooopppttteeeeeeddd___fffaaasssttt


IIINNNFFFOOO:::            BBBLLL333111:::   IIInnniiitttiiiaaallliiizzziiinn  nggg   BBBLLL333222


IIINNNFFFOOO:::            CCCooorrreee___312   TTTEEEEEESSSMMMCCC___OOOPPPTT  TEEEEEEDDD___RRREEETTTUUURRRNNN___EEENNNTTTRRRYYY___DDDOOONNNEEE


IIINNNFFFOOO:::            BBBLLL333111:::   IIInnniiitttiiiaaallliiizzzeeedd  d   BBBLLL333222


IIINNNFFFOOO:::            EEEXXXIIITTT   BBBLLL333111


IIINNNFFFOOO:::            bbblll333111___tttooo___kkkeeerrrnnneeelll:::   kk  keeerrrnnneeelll___rrreeesssuuummmeee___eeennntttrrryyy   ===   000xxx111eee0  00000000


IIINNNFFFOOO:::            bbblll333111   jjjuuummmpppsss   tttooo   EEELLL22  2:::   kkkeeerrreeennnlll   eeennntttrrryyy


[    0.268504] bl31_set_tee_protect !!!
INFO:    Non-Secure Boot or IC_REV >= B00 : no action !!
[    0.277717] bl31_set_tee_protect ret = 0
[    0.717319] ****** rtk_lockapi_init 597, chip: id=0x00000000, revision=0x00010000
TVE_setDAC 2485,  0xd48bd400
[    2.831009] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u2host status is okay
[    2.840939] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ehci status is okay
[    2.849765] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ohci status is okay
[    2.865057] rtk-usb-power-manager 98000000.rtk_usb_power_manager: create_debug_files
[    3.860143] [RTD129x PCIE Slot2] 9803b000.pcie2: PCIE device has link downin slot 2
[    3.868869] [RTD129x PCIE Slot2] 9803b000.pcie2: rtk_pcie2_hw_initial fail
[    4.090454] [RTD129x PCIE Slot1] 9804e000.pcie: PCIE device has link down in slot 1
[    4.099079] [RTD129x PCIE Slot1] 9804e000.pcie: rtk_pcie_hw_initial fail
[    4.111269] rtk119x-ir 98007000.irda: [rtk119x_ir_probe]: can't get multiple support from dtb, set to default->not support

[ROS: openRPC() intr_scpu_dev_r buf  0x00e2ffa1 s  0x00e2ffa1 e  0x00e4ffa1 i  0x00e2ffa1
[ROS: openStubRPC() intr_w buf  0x00e6ffa1 s  0x00e6ffa1 e  0x00e8ffa1 i  0x00e6ffa1[AVCPU] Set Debug level flag  0x81e03dac *flag  0x01df51e0 ucache  0xa  1df51e0
[AVCPU] Set Debug level *ptrDebugFlag  0x00000001
-------------------
Audio Version = 160345 (Kylin)
Common Version = 0
Binary src compiled at Aug  3 2017 14:39:32
Note =
-------------------




[A] gloabl malloc size  0x003ffeb8
[    4.182028] AudioIntrRead:143 can't find process for handling AudioIntrRead programID:98
[    4.191265] AudioIntrRead: program:98 version:0 procedure:1 taskID:0 sysTID:4294967295 sysPID:4294967295 size:4 context:81e0357d atomic
[    4.282648] dw-apb-uart 9801b200.serial1: clock rate not defined
[    4.413337] rtc_rtd1295 9801b600.rtc: rtk_rtc already enabled
[    4.424868] cec_core_init, register cec_bus ffffffc00119b3d8
[    4.430810] register cec driver 'cec' (ffffffc00119b558)
[    4.436303] register cec device 'cec0' (ffffffc00119b650) to cec0
[    4.442669] [cec_bus_match name = cec0,len=4,drv_name=cec]
[    4.448326] probe : cec_dev 'cec0' (ffffffc00119b650), cec_drv 'cec' (ffffffc00119b558)
[    4.457182] register cec device 'cec1' (ffffffc00119b900) to cec0
[    4.463535] [cec_bus_match name = cec1,len=4,drv_name=cec]
[    4.469210] probe : cec_dev 'cec1' (ffffffc00119b900), cec_drv 'cec' (ffffffc00119b558)
[    4.569193] [SDIO] rtk_sdhci_set_clock end real_div=1f4, div=fa, c3c=0, PLL=ae4388, CLK=fa07
[    4.589335] EMMC : emmc of_node found
[    4.593132] [rtkemmc_probe] get driving s0 : 0x1
[    4.597858] [rtkemmc_probe] get driving s0 : 0x77
[    4.602682] [rtkemmc_probe] get driving s0 : 0x77
[    4.607498] [rtkemmc_probe] get driving s0 : 0x77
[    4.612320] [rtkemmc_probe] get driving s0 : 0x33
[    4.617141] [rtkemmc_probe] get driving s2 : 0x1
[    4.619193] [SDIO] rtk_sdhci_set_clock end real_div=29c, div=14e, c3c=0, P  LL=ae4388, CLK=4e47
[    4.630603] [rtkemmc_probe] get driving s2 : 0xbb
[    4.635419] [rtkemmc_probe] get driving s2 : 0xbb
[    4.640239] [rtkemmc_probe] get driving s2 : 0xbb
[    4.645055] [rtkemmc_probe] get driving s2 : 0x33
[    4.649877] [rtkemmc_probe] get tx tuning switch : 0
[    4.654959] [rtkemmc_probe] get rx tuning switch : 0
[    4.669191] [SDIO] rtk_sdhci_set_clock end real_div=3e8, div=1f4, c3c=0, PLL=ae4388, CLK=f447
[    4.712388] -->rfkill_bluetooth_init
[    4.719207] [SDIO] rtk_sdhci_set_clock end real_div=7d0, div=3e8, c3c=0, PLL=ae4388, CLK=e8c7
[    4.720518] audio-notifier audio-out-devices: failed to notify ACPU: -22
[    4.750646] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.761355] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.775662] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.786336] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.797012] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.807686] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.818361] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.829036] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.839711] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.850386] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.860468] init: FIXME: selinux is forced to permissive mode!!
[    4.861062] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.862393] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.903125] card->mmc_avail_type = 0x00000013
[    4.920890] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: create_debug_files
[    4.937040] init: waitpid failed: No child processes
[    4.943459] init: service 'console' requires console
[    4.943473] init: loglevel: invalid log level'8'
[    5.215218] CL_DEV::ST 0 -> 0
[    5.296332] init: Failed to read from /dev/hw_random: No such device
[    5.305003] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    5.313215] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    5.323237] init: Failed to read from /dev/hw_random: No such device
/ # [    5.434993] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    5.460137] rtk-ohci 98013400.ohci: _ohci_readl [USB Workaround] fixed force to enable ohci clock
[    5.660259] usb usb5-port1: port 1, status 0501, change 0000, 480 Mb/s
[    5.779189] usb 5-1: new high-speed USB device number 2 using rtk-ehci (platform)
[    5.859257] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: Connection change OK: IN host mode to attach device at cc1 (cc_status=0x3b)
[    5.934417] usb 5-1: bInterfaceClass = 9
[    6.129484] usb 5-1-port1: port 1, status 0101, change 0000, 12 Mb/s
[    6.209194] usb 5-1.1: new high-speed USB device number 3 using rtk-ehci (platform)
[    6.326465] usb 5-1.1: bInterfaceClass = 8
[    6.439189] usb 5-1.1: hub_port_connect unbind-probe dev_name = 5-1.1 jiffies= 0x27d
[   18.600668] sd 3:0:0:0: [sda] No Caching mode page found
[   18.606115] sd 3:0:0:0: [sda] Assuming drive cache: write through
[AVCPU] Set Debug level flag  0x81dff88c *flag  0x01269b90 ucache  0xa1269b90  
[AVCPU] Set Debug level *ptrDebugFlag  0x00000000
[   26.018871] ueventd: SELinux: Could not get canonical path /sys/devices/platform/98012000.emmc/mmc_host/mmc1/mmc1:0001/block/mmcblk0/mmcblk0p4 restorec  on: No such file or directory.
[  218.952443] [PMIC] gmt_g2227_shutdown: prepare poweroff
[ACPU] receive rtk_if_prepare_suspend
enter rtk_standby_main, watchdog sec 0  0x00000000
[ACPU] IR key is  0x00000000 mask  0x00000000 shift 32
9ET_SUSPEND_VERS[ IO N2 =1=8 2.
tw9a4it96 r3]tk r_cehbeocokt_s:y sRteesm_traeradtyi_ntog_ ssusypsetnde amu
 hor 1 notify 0

C1:80000000
C2
?
C3hswitch frequency to 0x00000046
frequency divider is 0x00000080
switch frequency to 0x00000046
frequency divider is 0x00000004
switch to SDR 8 bit
switch bus width to 0x00000008 bits success

hwsetting size: 000005CC
C4
f
5-5
Goto FSBL: 0x10100000
<=============================================>
fsbl_main: sys_secure_type = 0x0000BEEE
fsbl_main: sys_boot_type = 0x00000002
fsbl_main: sys_boot_enc = 0x00000000
fsbl_main: sys_bisr_done = 0x00000000
sys_hwsetting_size:00000600
sys_bootcode_size:000C61C0
sys_secure_fsbl_size:00010B80
sys_secure_os_size:000727C0
sys_bl31_size:00005040
sys_rsa_key_fw_size:00000000
sys_rsa_key_tee_size:00000000
sys_rescue_size:00026448

HwSetting:
hwsetting_blk_no:00000100
hwsetting_total_size:00000680
hwsetting_blk_count:00000004

Bootcode:
bootcode_blk_no:00000104
bootcode_total_size:000C61E0
bootcode_blk_count:00000631

FSBL:
secure_fsbl_blk_no:00000735
secure_fsbl_total_size:00010BA0
secure_fsbl_blk_count:00000086

TEE OS:
secure_os_blk_no:000007BB
secure_os_total_size:000727E0
secure_os_blk_count:00000394

BL31:
bl31_blk_no:00000B4F
bl31_total_size:00005060
bl31_blk_count:00000029

RSA Key Fw:
rsa_key_fw_blk_no:00000B78
rsa_key_fw_total_size:00000000
rsa_key_fw_blk_count:00000000

RSA Key TEE:
rsa_key_tee_blk_no:00000B78
rsa_key_tee_total_size:00000000
rsa_key_tee_blk_count:00000000

Rescue:
rescue_blk_no:00000B78
rescue_total_size:00026468
rescue_blk_count:00000133
********** FW_TYPE_GOLD_TEE **********
fwInfo->fwType: 00000023
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 10200000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 000F7600
fwInfo->dataSize: 000727E0
body_size:000727C0
flash_unit_no:000007BB
flash_unit_count:00000394
real_size:0007278C
sha256 Fw
********** FW_TYPE_GOLD_BL31 **********
fwInfo->fwType: 00000028
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 10120000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 00169E00
fwInfo->dataSize: 00005060
body_size:00005040
flash_unit_no:00000B4F
flash_unit_count:00000029
real_size:00005018
sha256 Fw
********** FW_TYPE_BOOTCODE **********
fwInfo->fwType: 00000001
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 00020000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 00020800
fwInfo->dataSize: 000C61E0
body_size:000C61C0
flash_unit_no:00000104
flash_unit_count:00000631
real_size:000C6180
sha256 Fw
j bootcode jump address:00020000
64b


U-Boot 2012.07 svn.161586    (Jan 23 2018 - 15:58:00)

CPU  : Cortex-A53 quad core - AARCH32
Board: Realtek QA Board
DRAM:  0 Bytes
Watchdog: Disabled
Cache: Enabled
Non-Cache Region: 1 MB@0x07900000
MMC:   RTD1295 eMMC: 0
SD device number = 1
rsp[0]=0x15010041,
                       rsp[1]=0x57504433,
                       rsp[2]=0x5200dbde,
                       rsp[3]=0xf4e414ed
rsp[0]=0xd0270132,
                       rsp[1]=0x0f5903ff,
                       rsp[2]=0xf6dbffef,
                       rsp[3]=0x92404009
mmc->version=0x00010000
version=0x00000004
[LY] cardtype=57, mmc->card_caps=0f
[LY] freq = 00464388, clk diver = 00000080
[LY] speed up emmc at HS-200
[LY] HS-200 bus width=2
[LY] mmc->boot_caps = 20b
TEMP TX_WINDOW=0x7fffffff, TX_best=0xf
RX_WINDOW=0xfe0fffff, RX_best=0x6
TX1_WINDOW=0x7fffff80, TX_best=0x12
[LY] hs200 : 0
[HC] WPG_SIZE = 8388608
Device: RTD1295 eMMC
Manufacturer ID: 15
OEM: 100
Name: AWPD3
Tran Speed: 5f5e100
Rd Block Len: 512
MMC version 4.0
High Capacity: No
Capacity: 14.6 GiB
Bus Width: 8-bit
Speed: HS200
Factory: MMC
Factory: pp:0, seq#:0x8, size:0x21600
------------can't find tmp/factory/000BootParam.h
HDMITx_HPD=False
------------can't find tmp/factory/video_rpc.bin
tv_system=25 mode=1
In:    serial
Out:   serial
Err:   serial
Net:   Realtek PCIe GBE Family Controller mcfg = 0024
dev->name=r8168#0
Hit Esc or Tab key to enter console mode or rescue linux:  0
------------can't find tmp/factory/recovery
======== Checking into android recovery ====

Start Boot Setup ...
---------------LOAD  NORMAL FW  TABLE ---------------
[INFO] fw desc table base: 0x00620000, count: 22
Normal boot fw follow...
Kernel:
         FW Image to 0x03000000, size=0x00f96c00 (0x03f96c00)
         FW Image fr 0x02c42000
DT:
         FW Image to 0x02100000, size=0x00010068 (0x02110068)
         FW Image fr 0x028b0200
Audio FW:
         FW Image to 0x01b00000, size=0x00351c78 (0x01e51c78)
         FW Image fr 0x028f0200
IMAGE FILE:
         FW Image to 0x1e800000, size=0x00384000 (0x1eb84000)
         FW Image fr 0x361002000
Start A/V Firmware ...
 FW]kdycldicn1__bmroidneg  [u0px 0h7w:s esthtiifntg:
i6 lFeinngitshh:  k2y]l
rn_bringg_mtte_mtpe shtwisnegt trientgu
On[s+ ]0[0A
[][aio_HcWuErn_avballe:]
T0[xA0O0]]a iaou_tCoR
_Onne:w
xvSaYlS:_ C[L0OxC0K2_]E NfAoBrLcEe1_ p[w m0
o9800000c]: 0x13dfcedcc526_1m
0dSeY S[_0CxL0O7C:K _sEhNiAfBtL:E 22  [l e0nxg9t8h0:0 020]1
:]: 0x58cfufre_4v1a6l
E S[Y0Sx_0S0O]F Ta_uRtEoS
0Tn1e w[_ v0axl9:8 0[000x00020]] :f o0rxcbef_dpaw1m0
 1
gYS_SOFT_RESdEcTd4c 3[_ m0oxd9e8 0[000x00580:] :s h0ixf0t0:0 068 0l1efn
_t[hA:O ]2a]o
[SetDACAcnuarl_ovgaOln::
T0TxV0E0_]V DaAuCt_oC
8Rn1e w[_ v0axl9:8 0[108x30a20]] :f o0rxcae8_6pcw0m2
 0
hIO_O_ACANA_dGcCdTcL51_ m[o d0ex 9[800x00696:0 4s]h:i f0tx:2 469 5l1e5n0g4t
I:A I2O]_
1_ACANA_cAuDrC__vGaClT:L 2[ 0[x 000x]9 8a0u0t6o6
]0n]e:w _0vxa8l8:0 a[30ax0002
T AfIoOr_cIe__ApDwCm_
9CON [ 0x980066fdcc]d:c 60_xm2o2d1ef 0[000x00
0:A IsOh_iIf_tA:D C2_ TlCeOnNg t[h :0 x29]8
0066fc]:c u0rx_2v2a1lf:f f[000x
[0[]- ]a[uAtOo]
2anieow__HvWaEln:a b[l0ex]0
i][ Afuodricoe]_SpewtmT
 ckRate  0x000000c8
[ACPU] Set protect, start: 0x00000000 end: 0x00001000 moduleid:6
HDMI Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP

SPDIF Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP

Force 2ch Format: DTS DTSHD AC3 DDP MLP AAC WMAPRO



[AO][InitHDMIVideoType]HDMI Frequecny 148, resolution 25

EXPORT ENV AT 0x10000000
0tk_preload_bootimages_emmc : load U-Boot 64 from 0x00028125 to
ic0@@15@@0@00@0@O0 new itSth eps iTzVe  S0yx0st0e1m0 0m0a0g0
   number = 0xc0de0bee, addr = 0xa001f800@@@@@@@
[AUDIO WARNING] ERR UNCACHEABLE_VADDR  0xb8071200 @  0x81b2e538

@@@@@@@@@ boot_info->tv_sys.interfaceType 0
[@@VIDEO_RPC_VOUT_ToAgent_ConfigTVSystem_0_svc]type 0!
HDMIOff = 0
[VO]vo->is_hdmi_off_clock_on:0
[@@VIDEO_RPC_VOUT_ToAgent_ConfigVideoStandard_0_svc]
[VO_SetVideoStandard]st 25 p 1 1 0
[VO_SetVideoStandard]ped 1 data0  0x00000004 data1  0x00000000
[VO_SetVideoStandard]HDMIoff 0 is_tve_on 1 user_cvbs_off 0
lvds.format 0 port_setting  0x00000381 lvds_wb 0
[VO setTVStandard 25 3D 0 0]

(TVE) TVE_DAC_mode 0,cmd->enProg 1!!
TV_NTSC_J
~~comp 0, ch2 1, mode_3D 0!!
~~comp 0, ch2 1, mode_3D 0!!
~~TVE standard#
copy_2nd_bootloader_and_run : src:0x01500000, dst:0x00021000, size:0x000c5000
Jumping to 2nd bootloader...
SetVideoStandard return!
[@@VIDEO_RPC_VOUT_ToAgent_ConfigHdmiInfoFrame_0_svc]

(VO_ConfigHDMI_InfoFrame) L:236, is_hdmi_plugin 1, hdmiMode 1!!Mode 1 dataByte1  0x00000000  0x00000000  0x00000000
dataByte4  0x00000000  0x00000000 int0  0x00000001

(HDMI_3D) mode 1, HDMI_gen 1, En_3D 0, Format_3D 0 scramble:0!!clearDynamicRangeMasteringPkt()

 go back SET_HDMI!!boot_info  0xa001f600 magic  0x2452544b en 0
[AO][_AO_if_video_HDMI_mode]HDMI not enabled
[AO][+]_AO_setup_default_audio_infoframe
[AO][--]_AO_hdmi_disable(0)
[AUDIO WARNING]
[AO][_AO_hdmi_disable]do nothing, HDMI not enable  0x00000000  0x00000001
Audio_Channel_Count 1 :2CH, audio_layout:0
HDMI_Frequency 148 :1080p50,1080p60
Sampling_Frequency 3 :48K
CTS = 148500, N = 6144
[+][HDMI_gen_audio_infoframe]
CA:2CH: L,R
[-][HDMI_gen_audio_infoframe]
SYS_PLL_PSAUDA1 [ 0x98000130]: 0x0050022d
[AO][++]_AO_hdmi_enable(0)
[AUDIO WARNING]
[AO][_AO_hdmi_enable]do nothing, HDMI not enable  0x00000000  0x00000001
[AO][-]_AO_setup_default_audio_infoframe


U-Boot 2015.07-gdc68be6-dirty (Nov 30 2016 - 09:54:29 +0800)

CPU  : Cortex-A53 Quad Core
Board: Realtek QA Board
DRAM:  1 GiB
mapping memory 0x20000000-0x40000000 non-cached
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
rtk_plat_set_fw not port yet, use default configs
## Flattened Device Tree blob at 02100000
   Booting using the fdt blob at 0x2100000
   reserving fdt memory region: addr=0 size=30000
   reserving fdt memory region: addr=1f000 size=1000
   reserving fdt memory region: addr=30000 size=d0000
   reserving fdt memory region: addr=3200000 size=b800000
   reserving fdt memory region: addr=1b00000 size=400000
   reserving fdt memory region: addr=2600000 size=c00000
   reserving fdt memory region: addr=1ffe000 size=4000
   reserving fdt memory region: addr=11000000 size=9200000
   reserving fdt memory region: addr=10000000 size=14000
   reserving fdt memory region: addr=2200000 size=400000
   reserving fdt memory region: addr=1b00000 size=500000
   Using Device Tree in place at 0000000002100000, end 0000000002113067
Bring UP slave CPUs
Jump to BL31 entrypoint
VERBOSE: bl31_setup
NOTICE:  BL31: v1.2(debug):1522ab7
NOTICE:  BL31: Built : 16:33:46, Oct 13 2016
INFO:    BL31: Initializing runtime services
INFO:    Start to init service std_svc
INFO:    Finish to init service std_svc
INFO:    Start to init service opteed_fast
INFO:    Finish to init service opteed_fast
INFO:    BL31: Initializing BL32
INFO:    TEE-CORE: TEE OS v2.1
INFO:    TEE-CORE: tee os version : 1
INFO:    TEE-CORE: OTP tee os version : 0
INFO:    TEE-CORE: chip_rev_id : 10000
INFO:    TEE-CORE: check golden fw : 10050044
INFO:    TEE-CORE: Do not supoort check tee os version in this chip.
INFO:    TEE-CORE: Initializing (828cd34-dev #1 Thu Dec  8 16:13:14 CST 2016 aarch64)
MESSAGE: [0x0] TEE-CORE:tee_otp_get_hw_unique_key:46: ************************     tee_otp_get_hw_unique_key chip id: 10000
INFO:    TEE-CORE: teecore inits done
INFO:    Core_0 TEESMC_OPTEED_RETURN_ENTRY_DONE
INFO:    Core_0 got optee_vectors (0x1020093c)
INFO:    BL31: Initialized BL32
INFO:    EXIT BL31
INFO:    bl31_to_kernel: kernel_resume_entry = 0x1e000
INFO:    bl31 jumps to EL2: kerenl entry
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.17-g26a590a-dirty (maifanghao@ZidooServer) (gcc version 4.9.4 (OpenWrt/Linaro GCC 4.9-2015.06 r47591) ) #8 SMP PREEMPT Thu Aug 17 15:34:28 CST 2017
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] alternatives: enabling workaround for ARM erratum 845719
[    0.000000] DT: cma-improve=0
[    0.000000] earlycon: Early serial console at MMIO32 0x98007800 (options '')
[    0.000000] bootconsole [uart0] enabled
WARNING: NO PSCI SERVICE: 0x84000000
WARNING: NO PSCI SERVICE: 0x84000006
WARNING: NO PSCI SERVICE: 0x8400000a
WARNING: NO PSCI SERVICE: 0x8400000a
VVVEEERRRBBBOOOSSSEEE:::   bbblll333111___ssseeetttuuuppp


NNNOOOTTTIIICCCEEE:::      BBBLLL333111:::   vvv111...222(((dddeeebbbuuuggg))):::111555222222aaabbb777


NNNOOOTTTIIICCCEEE:::      BBBLLL333111:::   BBBuuuiiilllttt   :::   111666:::333333:::444666,,,   OOOcccttt   111333   222000111666


IIINNNFFFOOO:::            BBBLLL333111:::   IIInnniiitttiiiaaallliiizzziiinnnggg   rrruuunnntttiiimmmeee   ssseeerrrvvviiiccceeesss


IIINNNFFFOOO:::            SSStttaaarrrttt   tttooo   iiinnniiittt   ssseeerrrvvviiiccceee   ssstttddd___sssvvvccc


IIINNNFFFOOO:::            FFFiiinnniiissshhh   tttooo   iiinnniiittt   ssseeerrrvvviiiccceee   ssstttddd___sssvvvccc


IIINNNFFFOOO:::            SSStttaaarrrttt   tttooo   iiinnniiittt   ssseeerrrvvviiiccceee   ooopppttteeeeeeddd___fffaaasssttt


IIINNNFFFOOO:::            FFFiiinnniiissshhh   tttooo   iiinnniiittt   ssseeerrrvvviiiccceee   ooopppttteeeeeeddd___fffaaasssttt


IIINNNFFFOOO:::            BBBLLL333111:::   IIInnniiitttiiiaaallliiizzziiinnnggg   BBBLLL333222


IIINNNFFFOOO:::            CCCooorrreee___321   TTTEEEEEESSSMMMCCC___OOOPPPTTTEEEEEEDDD___RRREEETTTUUURRRNNN___EEENNNTTTRRRYYY___DDDOOONNNEEE


IIINNNFFFOOO:::            BBBLLL333111:::   IIInnniiitttiiiaaallliiizzzeeeddd   BBBLLL333222


IIINNNFFFOOO:::            EEEXXXIIITTT   BBBLLL333111


IIINNNFFFOOO:::            bbblll333111___tttooo___kkkeeerrrnnneeelll:::   kkkeeerrrnnneeelll___rrreeesssuuummmeee___eeennntttrrryyy   ===   000xxx111eee000000000


IIINNNFFFOOO:::            bbblll333111   jjjuuummmpppsss   tttooo   EEELLL222:::   kkkeeerrreeennnlll   eeennntttrrryyy


[    0.268567] bl31_set_tee_protect !!!
INFO:    Non-Secure Boot or IC_REV >= B00 : no action !!
[    0.277779] bl31_set_tee_protect ret = 0
[    0.707605] ****** rtk_lockapi_init 597, chip: id=0x00000000, revision=0x00010000
TVE_setDAC 2485,  0xd48bd400
[    2.821592] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u2host status is okay
[    2.831522] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ehci status is okay
[    2.840348] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ohci status is okay
[    2.855630] rtk-usb-power-manager 98000000.rtk_usb_power_manager: create_debug_files
[    3.349565] [RTD129x PCIE Slot2] 9803b000.pcie2: PCIE device has link down in slot 2
[    3.358318] [RTD129x PCIE Slot2] 9803b000.pcie2: rtk_pcie2_hw_initial fail
[    3.579970] [RTD129x PCIE Slot1] 9804e000.pcie: PCIE device has link down in slot 1
[    3.588597] [RTD129x PCIE Slot1] 9804e000.pcie: rtk_pcie_hw_initial fail
[    3.600876] rtk119x-ir 98007000.irda: [rtk119x_ir_probe]: can't get multiple support from dtb, set to default->not support

[ROS: openRPC() intr_scpu_dev_r buf  0x00e2ffa1 s  0x00e2ffa1 e  0x00e4ffa1 i  0x00e2ffa1
[ROS: openStubRPC() intr_w buf  0x00e6ffa1 s  0x00e6ffa1 e  0x00e8ffa1 i  0x00e6ffa1[AVCPU] Set Debug level flag  0x81e03dac *flag  0x01df51e0 ucache  0xa1df51e0
[AVCPU] Set Debug level *ptrDebugFlag  0x00000001
-------------------
Audio Version = 160345 (Kylin)
Common Version = 0
Binary src compiled at Aug  3 2017 14:39:32
Note =
-------------------




[A] gloabl malloc size  0x003ffeb8
[    3.703098] AudioIntrRead:143 can't find process for handling AudioIntrRead programID:98
[    3.712341] AudioIntrRead: program:98 version:0 procedure:1 taskID:0 sysTID:4294967295 sysPID:4294967295 size:4 context:81e0357d atomic
[    3.884206] rtc_rtd1295 9801b600.rtc: rtk_rtc already enabled
[    3.895823] cec_core_init, register cec_bus ffffffc00119b3d8
[    3.901796] register cec driver 'cec' (ffffffc00119b558)
[    3.907290] register cec device 'cec0' (ffffffc00119b650) to cec0
[    3.913643] [cec_bus_match name = cec0,len=4,drv_name=cec]
[    3.919299] probe : cec_dev 'cec0' (ffffffc00119b650), cec_drv 'cec' (ffffffc00119b558)
[    3.928506] register cec device 'cec1' (ffffffc00119b900) to cec0
[    3.934858] [cec_bus_match name = cec1,len=4,drv_name=cec]
[    3.940577] probe : cec_dev 'cec1' (ffffffc00119b900), cec_drv 'cec' (ffffffc00119b558)
[    4.029903] [SDIO] rtk_sdhci_set_clock end real_div=1f4, div=fa, c3c=0, PLL=ae4388, CLK=fa07
[    4.050055] EMMC : emmc of_node found
[    4.053855] [rtkemmc_probe] get driving s0 : 0x1
[    4.058582] [rtkemmc_probe] get driving s0 : 0x77
[    4.063408] [rtkemmc_probe] get driving s0 : 0x77
[    4.068223] [rtkemmc_probe] get driving s0 : 0x77
[    4.073048] [rtkemmc_probe] get driving s0 : 0x33
[    4.077865] [rtkemmc_probe] get driving s2 : 0x1
[    4.079903] [SDIO] rtk_sdhci_set_clock end real_div=29c, div=14e, c3c=0, PLL=ae4388, CLK=4e47
[    4.091333] [rtkemmc_probe] get driving s2 : 0xbb
[    4.096149] [rtkemmc_probe] get driving s2 : 0xbb
[    4.100971] [rtkemmc_probe] get driving s2 : 0xbb
[    4.105785] [rtkemmc_probe] get driving s2 : 0x33
[    4.110608] [rtkemmc_probe] get tx tuning switch : 0
[    4.115691] [rtkemmc_probe] get rx tuning switch : 0
[    4.129904] [SDIO] rtk_sdhci_set_clock end real_div=3e8, div=1f4, c3c=0, PLL=ae4388, CLK=f447
[    4.173576] -->rfkill_bluetooth_init
[    4.177327] -->rfkill_bluetooth_probe
[    4.181105] [SDIO] rtk_sdhci_set_clock end real_div=7d0, div=3e8, c3c=0, PLL=ae4388, CLK=e8c7
[    4.181213] bluetooth_set_power: block=1
[    4.181217] <--rfkill_bluetooth_probe
[    4.185691] audio-notifier audio-out-devices: failed to notify ACPU: -22
[    4.221227] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.231897] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.246210] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.256886] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.267572] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.278246] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.288920] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.299595] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.310270] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.320945] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.331620] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.342303] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.389298] card->mmc_avail_type = 0x00000013
[    4.416764] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: create_debug_files
[    4.675918] CL_DEV::ST 0 -> 0
Wed Mar 14 18:29:34 UTC 2018 Starting OpenWRT init
[    4.958900] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    4.981043] rtk-ohci 98013400.ohci: _ohci_readl [USB Workaround] fixed force to enable ohci clock
[    5.150999] usb usb3-port1: port 1, status 0101, change 0000, 12 Mb/s
[    5.181031] usb usb5-port1: port 1, status 0501, change 0000, 480 Mb/s
[    5.299973] usb 5-1: new high-speed USB device number 2 using rtk-ehci (platform)
[    5.329928] usb 3-1: new high-speed USB device number 2 using xhci-hcd (98029000.dwc3_u2host)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug[    5.380094] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: Connection change OK: IN host mode to attach device at cc1 (cc_status=0x3b)
 level
[    5.455304] usb 5-1: bInterfaceClass = 9
[    5.493482] usb 3-1: bInterfaceClass = 224
[    5.650496] usb 5-1-port1: port 1, status 0101, change 0000, 12 Mb/s
[    5.739912] usb 5-1.1: new high-speed USB device number 3 using rtk-ehci (platform)
[    5.857566] usb 5-1.1: bInterfaceClass = 8
[    5.969913] usb 5-1.1: hub_port_connect unbind-probe dev_name = 5-1.1 jiffies= 0x24e
[    7.463433] block: unable to load configuration (fstab: Entry not found)
[    7.470354] block: no usable configuration
ext4 etc mounted!
mount: /dev: filesystem mounted, but mount(8) failed: No such file or directory
Wed Mar 14 18:29:37 UTC 2018 Waiting 27 x 0.1 seconds for OpenWRT coldplug
Wed Mar 14 18:29:37 UTC 2018 Starting Android init
[    8.546107] init: FIXME: selinux is forced to permissive mode!!
[    8.610229] init: /init.kylin.rc: 507: invalid option 'disable'
[    8.617471] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[    9.001840] init: Failed to read from /dev/hw_random: No such device
[    9.008437] init: could not open /dev/keychord: No such file or directory
[    9.830027] init: Failed to read from /dev/hw_random: No such device
[    9.911131] init: property_set("ro.expect.recovery_id", "0x4ba9b8a1f510cea7c302bf827bf96ad3dedb3ee9000000000000000000000000") failed
[    9.923816] init: /recovery not specified in fstab
[   10.026547] bluetooth_set_power: block=1
[   10.031793] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[   10.040025] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[   10.063954] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[   10.072292] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[   10.0810[9AV8CP]U]  inSeitt : Decbuang nleovtel  ffilangd   0'/x8s1dyffs88tcis*mf/blaing /i 0nx0s12t6al9bl9-0 rucecacohvee  ry0x.a1sh26'9,b9 0d
u a[AblVCiPUn] gS e't fDelbasugh l_evreelco *vpetrrDy'eb
 gFlag  0x00000000
[   10.103354] init: cannot find '/system/bin/jpuinit', disabling 'jpuinit'
[   10.110421] devfreq 98050000.gpu: Couldn't update frequency transition information.
root@kylin32:/ # [   11.025566] healthd: No charger supplies found
[   13.320014] Do not detect the SDIO card and close the clock
[   13.325943] rtk_sdmmc_get_cd: SD card does not exist, regCARD_EXIST = 0
[   18.168682] sd 3:0:0:0: [sda] No Caching mode page found
[   18.175202] sd 3:0:0:0: [sda] Assuming drive cache: write through
[   91.905026] init: no such service 'regService'
[   91.909738] init: no such service 'regService'
[   94.772503] r8169 98016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10).
[   94.781472] r8169 98016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
[  156.152292] init: cannot find '/system/bin/preinstall.sh', disabling 'preinstall'
[  167.797072] init: avc:  denied  { set } for property=rockchip.media.musiccount scontext=u:r:system_app:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service

@jjm2473
Copy link
Owner

jjm2473 commented Sep 6, 2020

还是加微信吧，方便随时调整

@jjm2473
Copy link
Owner

jjm2473 commented Sep 6, 2020

uboot 版本EAE7790_2018年_08月_01日_星期三应该是比较新的，我看之前的uboot都是2018年_07月_04日

Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@jjm2473 @liuyu160