-
Notifications
You must be signed in to change notification settings - Fork 0
/
CHANGES.html
3127 lines (2871 loc) · 161 KB
/
CHANGES.html
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<title>ns-3 Change Log</title>
</head>
<body>
<h1>
ns-3: API and model change history</h1>
<!--
This ChangeLog is updated in the reverse order
with the most recent changes coming first. Date format: DD-MM-YYYY
-->
<p>
ns-3 is an evolving system and there will be API or behavioral changes
from time to time. Users who try to use scripts or models across
versions of ns-3 may encounter problems at compile time, run time, or
may see the simulation output change. </p>
<p>
We have adopted the development policy that we are going to try to ease
the impact of these changes on users by documenting these changes in a
single place (this file), and not by providing a temporary or permanent
backward-compatibility software layer. </p>
<p>
A related file is the RELEASE_NOTES file in the top level directory.
This file complements RELEASE_NOTES by focusing on API and behavioral
changes that users upgrading from one release to the next may encounter.
RELEASE_NOTES attempts to comprehensively list all of the changes
that were made. There is generally some overlap in the information
contained in RELEASE_NOTES and this file. </p>
<p>
The goal is that users who encounter a problem when trying to use older
code with newer code should be able to consult this file to find
guidance as to how to fix the problem. For instance, if a method name
or signature has changed, it should be stated what the new replacement
name is. </p>
<p>
Note that users who upgrade the simulator across versions, or who work
directly out of the development tree, may find that simulation output
changes even when the compilation doesn't break, such as when a
simulator default value is changed. Therefore, it is good practice for
_anyone_ using code across multiple ns-3 releases to consult this file,
as well as the RELEASE_NOTES, to understand what has changed over time.
</p>
<p>
This file is a best-effort approach to solving this issue; we will do
our best but can guarantee that there will be things that fall through
the cracks, unfortunately. If you, as a user, can suggest improvements
to this file based on your experience, please contribute a patch or drop
us a note on ns-developers mailing list.</p>
<hr>
<h1>Changes from ns-3.29 to ns-3.30</h1>
<h2>New API:</h2>
<ul>
<li>Added the attribute <b>Release</b> to the class <b>EpsBearer</b>, to select the release (e.g., release 15)</li>
<li>The attributes <b>RegularWifiMac::HtSupported</b>, <b>RegularWifiMac::VhtSupported</b>, <b>RegularWifiMac::HeSupported</b>, <b>RegularWifiMac::RifsSupported</b>, <b>WifiPhy::ShortGuardEnabled</b>, <b>WifiPhy::GuardInterval</b> and <b>WifiPhy::GreenfieldEnabled</b> have been deprecated. Instead, it is advised to use <b>WifiNetDevice::HtConfiguration</b>, <b>WifiNetDevice::VhtConfiguration</b> and <b>WifiNetDevice::HeConfiguration</b>.</li>
<li>The attributes <b>{Ht,Vht,He}Configuration::{Vo,Vi,Be,Bk}MaxAmsduSize</b> and <b>{Ht,Vht,He}Configuration::{Vo,Vi,Be,Bk}MaxAmpduSize</b> have been removed. Instead, it is necessary to use <b>RegularWifiMac::{VO, VI, BE, BK}_MaxAmsduSize</b> and <b>RegularWifiMac::{VO, VI, BE, BK}_MaxAmpduSize</b>.</li>
<li>A new attribute <b>WifiPhy::PostReceptionErrorModel</b> has been added to force specific packet drops.</li>
<li>A new attribute <b>WifiPhy::PreambleDetectionModel</b> has been added to decide whether PHY preambles are successfully detected.</li>
<li>New attributes <b>QosTxop::AddBaResponseTimeout</b> and <b>QosTxop::FailedAddBaTimeout</b> have been added to set the timeout to wait for an ADDBA response after the ACK to the ADDBA request is received and to set the timeout after a failed BA agreement, respectively.</li>
<li>A new attribute <b>QosTxop::UseExpliciteBarAfterMissedBlockAck</b> has been added to specify whether explicit Block Ack Request should be sent upon missed Block Ack Response.</li>
<li>Added a new trace source <b>EndOfHePreamble</b> in WifiPhy for tracing end of preamble (after training fields) for received 802.11ax packets.</li>
<li>Added a new helper method to SpectrumWifiPhyHelper and YansWifiPhyHelper to set the frame capture model.</li>
<li>Added a new helper method to SpectrumWifiPhyHelper and YansWifiPhyHelper to set the preamble detection model.</li>
<li>Added a method to ObjectFactory to check whether a TypeId has been configured on the factory.</li>
<li>Added a new helper method to WifiHelper to set the 802.11ax OBSS PD spatial reuse algorithm.</li>
</ul>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li>
Added the possibility of setting the z coordinate for many
position-allocation classes: GridPositionAllocator,
RandomRectanglePositionAllocator, RandomDiscPositionAllocator,
UniformDiscPositionAllocator.
</li>
<li>
The WifiPhy attribute "CcaMode1Threshold" has been renamed to "CcaEdThreshold",
and the WifiPhy attribute "EnergyDetectionThreshold" has been replaced by a new attribute called "RxSensitivity"
</li>
<li>
It is now possible to know the size of the SpectrumValue underlying std::vector, as well as
accessing read-only every element of it.
</li>
<li>
The GetClosestSide method of the Rectangle class returns the correct closest side also for positions outside the rectangle.
</li>
<li> The trace sources BackoffTrace and CwTrace were moved from class QosTxop to base class Txop, allowing these values to be traced for DCF operation. In addition, the trace signature for BackoffTrace was changed from TracedValue to TracedCallback (callback taking one argument instead of two). Most users of CwTrace for QosTxop configurations will not need to change existing programs, but users of BackoffTrace will need to adjust the callback signature to match.
</li>
<li> A new buffer has been introduced in the LteEnbRrc class. This buffer will be used by a target eNB during handover to buffer the packets comming from a source eNB on X2 inteface. The target eNB will buffer this data until it receives RRC Connection Reconfiguration Complete from a UE.
</li>
<li> New trace sources, namely DrbCreated, Srb1Created and DrbCreated have beed implemented in LteEnbRrc and LteUeRrc classes repectively. These new traces are used to improve the connection of the RLC and PDCP stats in the RadioBearerStatsConnector API.
</li>
</ul>
<h2>Changes to build system:</h2>
<ul>
<li>Waf upgraded from 2.0.9 to 2.0.15.
</li>
<li> Options to run a program through Waf without invoking a project rebuild have been added. The command './waf --run-no-build <program-name>' parallels the behavior of './waf --run <program-name>' and, likewise, the command './waf --pyrun-no-build' parallels the behavior of './waf --pyrun <program-name>'.
</li>
</ul>
<h2>Changed behavior:</h2>
<ul>
<li>The wifi ADDBA handshake process is now protected with the use of two timeouts who makes sure we do not end up in a blocked situation. If the handshake process is not established, packets that are in the queue are sent as normal MPDUs. Once handshake is successfully established, A-MPDUs can be transmitted.</li>
<li> The default value of the <b>Margin</b> attribute in SimpleFrameCaptureModel was changed from 10 to 5.</li>
<li>LTE/EPC model has been enhanced with the new features. These new features allow the simulation user to test more realistic simulations related to the core network. These features are:</li>
<ul>
<li>SGW, PGW and MME are full nodes.</li>
<li>There are P2P links between core network nodes.</li>
<li>New S5 interface between SGW and PGW nodes based on GTPv2-C protocol.</li>
<li>Allow simulations with multiple SGWs and PGWs.</li>
</ul>
</li>
<li>LTE eNB RRC is extended to support:</li>
<ul>
<li>S1 signalling with the core network is initiated after the RRC connection establishment procedure is finished.</li>
<li>New ATTACH_REQUEST state to wait for finalization of the S1 signalling with the core network.</li>
<li>New InitialContextSetupRequest primitive of the S1 SAP that is received by the eNB RRC when the S1 signalling from the core network is finished.</li>
</ul>
</li>
<li> The default qdisc installed on single-queue devices (such as PointToPoint, Csma and Simple) is now FqCodel (instead of PfifoFast). On multi-queue devices (such as Wifi), the default root qdisc is now Mq with as many FqCoDel child qdiscs as the number of device queues. The new defaults are motivated by the willingness to align with the behavior of major Linux distributions and by the need to preserve the effectiveness of Wifi EDCA Functions in differentiating Access Categories (see issue #35).</li>
<li>LTE RLC TM mode does not report anymore the layer-to-layer delay, as it misses (by standard) an header to which attach the timestamp tag. Users can switch to the PDCP layer delay measurements, which must be the same.</li>
<li> Token Bank Fair Queue Scheduler (ns3::FdTbfqFfMacScheduler) will not anymore schedule a UE, which does not have any RBG left after removng the RBG from its allocation map if the computed TB size is greater than the "budget" computed in the scheduler.
</li>
<li> LTE module now supports the Radio Link Failure (RLF) functionality. This implementation introduced following key behavioral changes:
<ul>
<li> The UE RRC state will not remain in "CONNECTED_NORMALLY" state if the DL control channel SINR is below a set threshold.</li>
<li> The LTE RRC protocol APIs of UE i.e., LteUeRrcProtocolIdeal, LteUeRrcProtocolReal have been extended to send an ideal (i.e., using SAPs instead to transmitting over the air) UE context remove request to the eNB. Similarly, the eNB RRC protocol APIs, i.e, LteEnbRrcProtocolIdeal and LteEnbRrcProtocolReal have been extended to receive this ideal UE context remove request.</li>
<li> The UE will not synchronize to a cell whose RSRP is less than -140 dBm.</li>
<li> The non-contention based preambles during a handover are re-assigning to an UE only if it has not been assign to another UE (An UE can be using the preamble even after the expiryTime duration).</li>
<li> The RachConfigCommon structure in LteRrcSap API has been extended to include "TxFailParam". This new field would enable an eNB to indicate how many times T300 timer can expire at the UE. Upon reaching this count, the UE aborts the connection establishment, and performs the cell selection again. See TS 36.331 5.3.3.6. </li>
<li> The timer T300 in LteUeRrc class is now bounded by the standard min and max values defined in 3GPP TS 36.331.</li>
</ul>
</li>
</ul>
<hr>
<h1>Changes from ns-3.28 to ns-3.29</h1>
<h2>New API:</h2>
<ul>
<li> CommandLine can now handle non-option (positional) arguments. </li>
<li> Added CommandLine::Parse (const std::vector<std::string>> args) </li>
<li> NS_LOG_FUNCTION can now log the contents of vectors </li>
<li> A new position allocator has been added to the buildings module, allowing
nodes to be placed outside of buildings defined in the scenario.</li>
<li> The Hash() method has been added to the QueueDiscItem class to compute the
hash of various fields of the packet header (depending on the packet type).</li>
<li> Added a priority queue disc (PrioQueueDisc).</li>
<li> Added 3GPP HTTP model
<li> Added TCP PRR as recovery algorithm
<li> Added a new trace source in StaWifiMac for tracing beacon arrivals</li>
<li> Added a new helper method to ApplicationContainer to start applications with some jitter around the start time</li>
<li> (network) Add a method to check whether a node with a given ID is within a NodeContainer.</li>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li>TrafficControlHelper::Install now only includes root queue discs in the returned
QueueDiscContainer.</li>
<li>Recovery algorithms are now in a different class, instead of being tied to TcpSocketBase.
Take a look to TcpRecoveryOps for more information.</li>
<li>The Mode, MaxPackets and MaxBytes attributes of the Queue class, that had been deprecated in favor of the MaxSize attribute in ns-3.28, have now been removed and cannot be used anymore. Likewise, the methods to get/set the old attributes have been removed as well. Commands such as:
<pre>
Config::SetDefault ("ns3::QueueBase::MaxPackets", UintegerValue (4));
</pre>
should now be written as:
<pre>
Config::SetDefault ("ns3::QueueBase::MaxSize", QueueSizeValue (QueueSize (QueueSizeUnit::PACKETS, 4)));
</pre>
or with a string value with 'b' (bytes) or 'p' (packets) suffix, such as:
<pre>
Config::SetDefault ("ns3::QueueBase::MaxSize", StringValue ("4p"));
</pre>
</li>
<li>The Limit attribute of the PfifoFastQueueDisc class, that had been deprecated in favor of the MaxSize attribute in ns-3.28, has now been removed and cannot be used anymore. Likewise, the methods to get/set the old Limit attribute have been removed as well. The GetMaxSize/SetMaxSize methods of the base QueueDisc class must be used instead.</li>
<li>The Mode, MaxPackets and MaxBytes attributes of the CoDelQueueDisc class, that had been deprecated in favor of the MaxSize attribute in ns-3.28, have now been removed and cannot be used anymore. Likewise, the methods to get/set the old attributes have been removed as well. The GetMaxSize/SetMaxSize methods of the base QueueDisc class must be used instead.</li>
<li>The PacketLimit attribute of the FqCoDelQueueDisc class, that had been deprecated in favor of the MaxSize attribute in ns-3.28, has now been removed and cannot be used anymore. Likewise, the methods to get/set the old PacketLimit attribute have been removed as well. The GetMaxSize/SetMaxSize methods of the base QueueDisc class must be used instead.</li>
<li>The Mode and QueueLimit attributes of the PieQueueDisc class, that had been deprecated in favor of the MaxSize attribute in ns-3.28, have now been removed and cannot be used anymore. Likewise, the methods to get/set the old attributes have been removed as well. The GetMaxSize/SetMaxSize methods of the base QueueDisc class must be used instead.</li>
<li>The Mode and QueueLimit attributes of the RedQueueDisc class, that had been deprecated in favor of the MaxSize attribute in ns-3.28, have now been removed and cannot be used anymore. Likewise, the methods to get/set the old attributes have been removed as well. The GetMaxSize/SetMaxSize methods of the base QueueDisc class must be used instead.</li>
<li> Several traffic generating applications have additional trace sources that export not only the transmitted or received packet but also the source and destination addresses.</li>
<li>The returned type of <b>GetNDevices</b> methods in <b>Channel</b> and subclasses derived from it were changed from uint32_t to std::size_t. Likewise, the input parameter type of <b>GetDevice</b> in <b>Channel</b> and its subclasses were changed from uint32_t to std::size_t.</li>
<li>Wifi classes <b>DcfManager</b>, <b>DcaTxop</b> and <b>EdcaTxopN</b> were renamed to <b>ChannelAccessManager</b>, <b>Txop</b> and <b>QosTxop</b>, respectively.</li>
<li>QueueDisc::DequeuePeeked has been merged into QueueDisc::Dequeue and hence no longer exists.</li>
<li>The QueueDisc base class now provides a default implementation of the DoPeek private method
based on the QueueDisc::PeekDequeue method, which is now no longer available.</li>
<li>The QueueDisc::SojournTime trace source is changed from a TracedValue to a TracedCallback; callbacks that hook this trace must provide one ns3::Time argument, not two.</li>
<li>To avoid the code duplication in SingleModelSpectrumChannel and MultiModelSpectrumChannel classes, the attributes MaxLossDb and PropagationLossModel, and the traces PathLoss and TxSigParams are moved to the base class SpectrumChannel. Similarly, the functions AddPropagationLossModel, AddSpectrumPropagationLossModel, SetPropagationDelayModel and GetSpectrumPropagationLossModel are now defined in SpectrumChannel class. Moreover, the TracedCallback signature of LossTracedCallback has been updated from :
<pre>
typedef void (* LossTracedCallback) (Ptr<SpectrumPhy> txPhy, Ptr<SpectrumPhy> rxPhy, double lossDb);
</pre>
To :
<pre>
typedef void (* LossTracedCallback) (Ptr<const SpectrumPhy> txPhy, Ptr<const SpectrumPhy> rxPhy, double lossDb);
</pre></li>
<li>For the sake of LTE module API consistency the IPV6 related functions AssignUeIpv6Address and GetUeDefaultGatewayAddress6 are now declared in EpcHelper base class. Thus, these functions are now declared as virtual in the child classes, i.e., EmuEpcHelper and PointToPointEpcHelper.</li>
</ul>
<h2>Changes to build system:</h2>
<ul>
<li>Waf upgraded from 1.8.19 to 2.0.9, and ns-3 build scripts aligned to the new API.</li>
<li>The '--no32bit-scan' argument is removed from Waf apiscan; generation of ILP32 bindings is now automated from the LP64 bindings.</li>
<li> When using on newer compilers, new warnings may trigger build failures.
The --disable-werror flag can be passed to Waf at configuration time to turn
off the Werror behavior.</li>
<li> GTK+3 libraries (including PyGObject, GooCanvas2) are needed for the Pyviz visualizer, replacing GTK+2 libraries.</li>
</ul>
<h2>Changed behavior:</h2>
<ul>
<li>FqCoDelQueueDisc now computes the hash of the packet's 5-tuple to determine
the flow the packet belongs to, unless a packet filter has been configured.
The previous behavior is simply obtained by not configuring any packet filter.
Consequently, the FqCoDelIpv{4,6}PacketFilter classes have been removed.</li>
<li> ARP packets now pass through the traffic control layer, as in Linux. </li>
<li> The maximum size UDP packet of the UdpClient application is no longer limited to 1500 bytes.</li>
<li> The default values of the <b>MaxSlrc</b> and <b>FragmentationThreshold</b> attributes in WifiRemoteStationManager were changed from 7 to 4 and from 2346 to 65535, respectively.
</ul>
<hr>
<h1>Changes from ns-3.27 to ns-3.28</h1>
<h2>New API:</h2>
<ul>
<li> When deserializing Packet contents, <b>Header::Deserialize (Buffer::Iterator start)</b> and <b>Trailer::Deserialize (Buffer::Iterator start)</b> can not successfully deserialize variable-length headers and trailers. New variants of these methods that also include an 'end' parameter are now provided.</li>
<li> Ipv[4,6]AddressGenerator can now check if an address is allocated (<b>Ipv[4,6]AddressGenerator::IsAddressAllocated</b>) or a network has some allocated address (<b>Ipv[4,6]AddressGenerator::IsNetworkAllocated</b>).</li>
<li> LTE UEs can now use IPv6 to send and receive traffic.</li>
<li> UAN module now supports an IP stack.</li>
<li> Class <b>TcpSocketBase</b> trace source <i>CongestionWindowInflated</i> shows the values with the in-recovery inflation and the post-recovery deflation.
<li> Added a FIFO queue disc (FifoQueueDisc) and the Token Bucket Filter (TbfQueueDisc).</li>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li> Class <b>LrWpanMac</b> now supports extended addressing mode. Both <b>McpsDataRequest</b> and <b>PdDataIndication</b> methods will now use extended addressing if <b>McpsDataRequestParams::m_srcAddrMode</b> or <b>McpsDataRequestParams::m_dstAddrMode</b> are set to <b>EXT_ADDR</b>.</li>
<li> Class <b>LteUeNetDevice</b> MAC address is now a 64-bit address and can be set during construction.</li>
<li> Class <b>TcpSocketBase</b> trace source <i>CongestionWindow</i> shows the values without the in-recovery inflation and the post-recovery deflation; the old behavior has been moved to the new trace source <i>CongestionWindowInflated</i>.
<li>The Mode, MaxPackets and MaxBytes attributes of the Queue class have been deprecated in favor of the MaxSize attribute. Old attributes can still be used, but using them will be no longer possible in one of the next releases. The methods to get/set the old attributes will be removed as well.</li>
<li>The attributes of the QueueDisc subclasses that separately determine the mode and the limit of the QueueDisc have been deprecated in favor of the single MaxSize attribute.</li>
<li>The GetQueueSize method of some QueueDisc subclasses (e.g., RED) has been removed and replaced by the GetCurrentSize method of the QueueDisc base class.</li>
</ul>
<h2>Changes to build system:</h2>
<ul>
<li> The C++ standard used during compilation (default std=c++11) can be now be changed via the CXXFLAGS variable.</li>
</ul>
<h2>Changed behavior:</h2>
<ul>
<li>All Wi-Fi management frames are now transmitted using the lowest basic rate.</li>
<li>The Wi-Fi spectrum model now takes into account adjacent channels through OFDM transmit spectrum masks.</li>
<li> The CsmaNetDevice::PhyTxBeginTrace will trace all attempts to transmit, even those that result in drops. Previously, eventual channel drops were excluded from this trace.</l>
<li>The TCP congestion window trace now does not report on window inflation during fast recovery phase because it is no longer internally maintained as an inflated value (a separate trace called CongestionWindowInflated can be used to recover the old trace behavior).</li>
</ul>
<hr>
<h1>Changes from ns-3.26 to ns-3.27</h1>
<h2>New API:</h2>
<ul>
<li>Added <code>Vector{2,3}D.GetLength ()</code>.</li>
<li>Overloaded <code>operator+</code> and <code>operator-</code> for <code>Vector{2,3}D</code>.</li>
<li>Added iterator version of WifiHelper::Install() to install Wi-Fi devices on range of nodes.</li>
<li>Added a new attribute in TcpSocketBase to track the advertised window.</li>
<li>Included the model of <b>TCP Ledbat</b>.</li>
<li>Included the TCP SACK-based loss recovery algorithm outlined in RFC 6675.</li>
<li>Added <b>TCP SACK</b> and the <b>SACK emulation</b>. Added an Attribute to TcpSocketBase class,
called "Sack", to enable or disable the SACK option usage.</li>
<li>In 'src/wifi', several changes were made to enable partial <b>802.11ax</b> High Efficiency (HE) support:
<ul>
<li>A new standard value has been added that enables the new 11ax data rates.</li>
<li>A new 11ax preamble has been added.</li>
<li>A new attribute was added to configure the guard interval duration for High Efficiency (HE) PHY entities. This attribute can be set using the YansWifiPhyHelper.</li>
<li>A new information element has been added: HeCapabilities. This information element is added to the MAC frame header if the node is a HE node. This HeCapabilites information element is used to advertise the HE capabilities of the node to other nodes in the network.</li>
</ul>
</li>
<li> A new class were added for the RRPAA WiFi rate control mechanism.</li>
<li>Included carrier aggregation feature in LTE module</li>
<ul>
<li>LTE model is extended to support carrier aggregation feature according to 3GPP Release 10, for up to 5 component
carriers. </li>
<li>InstallSingleEnbDevice and InstalSingeUeDevice functions of LteHelper are now constructing LteEnbDevice and LteUeDevice
according to CA architecture. Each device, UE and eNodeB contains an instance of component carrier manager, and may
have several component carrier instances.</li>
<li>SAP interfaces are extended to include CA message exchange functionality.</li>
<li>RRC connection procedure is extended to allow RRC connection reconfiguration for the configuration of the secondary carriers.</li>
<li>RRC measurement reporting is extended to allow measurement reporting from the secondary carriers.</li>
<li>LTE traces are extended to include component carrier id.</li>
</ul>
</li>
<li>Function <b>PrintRoutingTable</b> has been extended to add an optional Time::Units
parameter to specify the time units used on the report. The new parameter is
optional and if not specified defaults to the previous behavior (Time::S).
</li>
<li><b>TxopTrace</b>: new trace source exported by EdcaTxopN.</li>
<li>A <b>GetDscpCounts</b> method is added to <b>Ipv4FlowClassifier</b> and <b>Ipv6FlowClassifier</b>
which returns a vector of pairs (dscp,count), each of which indicates how many packets with the
associated dscp value have been classified for a given flow.
</li>
<li>MqQueueDisc, a multi-queue aware queue disc modelled after the mq qdisc in Linux, has been introduced.
</li>
<li>Two new methods, <b>QueueDisc::DropBeforeEnqueue()</b> and <b>QueueDisc::DropAfterDequeue()</b> have
been introduced to replace <b>QueueDisc::Drop()</b>. These new methods require the caller to specify the
reason why a packet was dropped. Correspondingly, two new trace sources ("DropBeforeEnqueue" and
"DropAfterDequeue") have been added to the QueueDisc class, providing both the items that were dropped
and the reason why they were dropped.
</li>
<li>Added <b>QueueDisc::GetStats()</b> which returns detailed statistics about the operations of
a queue disc. Statistics can be accessed through the member variables of the returned object and
by calling the <b>GetNDroppedPackets()</b>, <b>GetNDroppedBytes()</b>, <b>GetNMarkedPackets()</b> and <b>GetNMarkedBytes()</b> methods on the returned object. Such methods return the number of packets/bytes
dropped/marked for the specified reason (passed as argument). Consequently:
<ul>
<li>A number of methods of the QueueDisc class have been removed: <b>GetTotalReceivedPackets()</b>,
<b>GetTotalReceivedBytes()</b>, <b>GetTotalDroppedPackets()</b>, <b>GetTotalDroppedBytes()</b>,
<b>GetTotalRequeuedPackets()</b>, <b>GetTotalRequeuedBytes()</b>.</li>
<li>The <b>Stats</b> struct and the <b>GetStats()</b> method of <b>RedQueueDisc</b> and <b>PieQueueDisc</b> have been removed and replaced by those of the QueueDisc base class.</li>
<li>The <b>GetDropOverLimit</b> and <b>GetDropCount</b> methods of <b>CoDelQueueDisc</b> have been removed.
The values they returned can be obtained by calling, respectively,
GetStats ().GetNDroppedPackets (CoDelQueueDisc::OVERLIMIT_DROP) and
GetStats ().GetNDroppedPackets (CoDelQueueDisc::TARGET_EXCEEDED_DROP). The "DropCount" trace of
<b>CoDelQueueDisc</b> has been removed as well. Packets dropped because the target is exceeded can
be obtained through the new "DropAfterDequeue" trace of the QueueDisc class.</li>
</ul>
</li>
<li> The new <b>QueueDisc::Mark()</b> method has been introduced to allow subclasses to request to mark a packet.
The caller must specify the reason why the packet must be marked. Correspondingly, a new trace source ("Mark")
has been added to the QueueDisc class, providing both the items that were marked and the reason why they
were marked.
</li>
<li>A new trace source, <b>SojournTime</b>, is exported by the QueueDisc base class to provide the
sojourn time of every packet dequeued from a queue disc. This has been made possible by adding a
timestamp to QueueDiscItem objects, which can be set/get through the new <b>GetTimeStamp()</b> and
<b>SetTimeStamp()</b> methods of the QueueDiscItem class. The <b>CoDel</b> queue disc now makes use of such feature of the base class, hence its Sojourn trace source and the CoDelTimestampTag class
have been removed.
</li>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li><b>ParetoRandomVariable</b> "Mean" attribute has been deprecated,
the "Scale" Attribute have to be used instead.
Changing the Mean attribute has no more an effect on the distribution.
See the documentation for the relationship between Mean, Scale and Shape.
</li>
<li>The default logging timestamp precision has been changed from 6 digits
to 9 digits, with a fixed format to ensure that 9 digits to the right of
the decimal point are always printed. Previously, default C++ iostream
precision and formatting was used.
</li>
<li>Abstract base class <b>WifiChannel</b> has been removed. As a result, a Channel type instead of a WifiChannel type
is now exported by WifiNetDevice.</li>
<li> The <b>GetPacketSize</b> method of <b>QueueItem</b> has been renamed <b>GetSize</b>
</li>
<li> The <b>DequeueAll</b> method of <b>Queue</b> has been renamed <b>Flush</b>
</li>
<li>The attributes <b>WifiPhy::TxAntennas</b> and <b>WifiPhy::RxAntennas</b>,
and the related accessor methods, were replaced by <b>WifiPhy::MaxSupportedTxSpatialStreams</b>
and <b>WifiPhy::MaxSupportedRxSpatialStreams</b>. A new attribute <b>WifiPhy::Antennas</b>
was added to allow users to define the number of physical antennas on the device.
</li>
<li>Sockets do not receive anymore broadcast packets, unless they are bound to an "Any" address (0.0.0.0)
or to a subnet-directed broadcast packet (e.g., x.y.z.0 for a /24 noterok).
As in Linux, the following rules are now enforced:
<ul>
<li> A socket bound to 0.0.0.0 will receive everything.</li>
<li> A socket bound to x.y.z.0/24 will receive subnet-directed broadcast (x.y.z.255) and unicast packets.</li>
<li> A socket bound to x.y.z.w will only receive unicast packets.</li>
</ul>
<b>Previously, a socket bound to an unicast address received also subnet-directed broadcast packets.
This is not anymore possible</b>.
</li>
<li>You can now Bind as many socket as you want to an address/port, provided that they are bound to different NetDevices.
Moreover, BindToNetDevice does not anymore call Bind. In other terms, Bind and BindToNetDevice can be called
in any order.
However, it is suggested to use BindToNetDevice <i>before</i> Bind in order to avoid conflicts.
</li>
</ul>
<h2>Changes to build system:</h2>
<ul>
<li> The API scanning process for Python bindings now relies on CastXML, and only 64-bit scans are presently supported (Linux 64-bit systems). Generation of 32-bit scans is documented in the Python chapter of the ns-3 manual.
</li>
<li> Modules can now be located in the 'contrib/' directory in addition to 'src/'
</li>
<li> Behavior for running Python programs was aligned with that of C++ programs; the list of modules built is no longer printed out.
</li>
</ul>
<h2>Changed behavior:</h2>
<ul>
<li><b>MultiModelSpectrumChannel</b> does not call StartRx for receivers that
operate on subbands orthogonal to transmitter subbands. Models that depend
on receiving signals with zero power spectral density from orthogonal bands
may change their behavior.
See <a href=https://www.nsnam.org/bugzilla/show_bug.cgi?id=2467>bug 2467</a>
for discussion.
</li>
<li><b>Packet Tag objects</b> are no longer constrained to fit within 21
bytes; a maximum size is no longer enforced.
</li>
<li> The default value of the <b>TxGain</b> and <b>RxGain</b> attributes in WifiPhy was changed from 1 dB to 0 dB.
</li>
<li> The reported SNR by WifiPhy::MonitorSnifferRx did not include the RxNoiseFigure, but now does; see <a href=https://www.nsnam.org/bugzilla/show_bug.cgi?id=2783>bug 2783</a> for discussion.
</li>
<li><b>Queue</b> has been redesigned as a template class object, where the type parameter
specifies the type of items to be stored in the queue. As a consequence:
<ul>
<li>Being a subclass of Queue, <b>DropTailQueue</b> is a template class as well.
<li>Network devices such as SimpleNetDevice, PointToPointNetDevice and CsmaNetDevice
use a queue of type Queue<Packet> to store the packets to transmit. The SetQueue
method of their helpers, however, can still be invoked as, e.g.,
SetQueue ("ns3::DropTailQueue") instead of, e.g., SetQueue
("ns3::DropTailQueue<Packet>").</li>
<li>The attributes <b>Mode</b>, <b>MaxPackets</b> and <b>MaxBytes</b> are now
defined by the QueueBase class (which Queue is derived from).</li>
</ul>
</li>
<li>Queue discs that can operate both in packet mode and byte mode (Red, CoDel, Pie) define their own
enum QueueDiscMode instead of using QueueBase::QueueMode.
</li>
<li>The CoDel, PIE and RED queue discs require that the size of the internal queue is the same as
the queue disc limit (previously, it was allowed to be greater than or equal).
</li>
<li> The default value of the <b>EnableBeaconJitter</b> attribute in ApWifiMac was changed from false to true.
</li>
<li> The NormalClose() callback of a TcpSocket object used to fire upon leaving TIME_WAIT state (2*MSL after FINs have been exchanged). It now fires upon entering TIME_WAIT state. Timing of the callback for the other path to state CLOSED (through LAST_ACK) has not been changed.
</li>
</ul>
<hr>
<h1>Changes from ns-3.25 to ns-3.26</h1>
<h2>New API:</h2>
<ul>
<li>A <b>SocketPriorityTag</b> is introduced to carry the packet priority. Such a tag
is added to packets by sockets that support this mechanism (UdpSocketImpl,
TcpSocketBase and PacketSocket). The base class Socket has a new SetPriority
method to set the socket priority. When the IPv4 protocol is used, the
priority is set based on the ToS. See the Socket options section of the
Network model for more information.
</li>
<li>A <b>WifiNetDevice::SelectQueue</b> method has been added to determine the user
priority of an MSDU. This method is called by the traffic control layer before
enqueuing a packet in the queue disc, if a queue disc is installed on
the outgoing device, or passing a packet to the device, otherwise. The
user priority is set to the three most significant bits of the DS field
(TOS field in case of IPv4 and Traffic Class field in case of IPv6). The
packet priority carried by the SocketPriorityTag is set to the user priority.
</li>
<li>The <b>PfifoFastQueueDisc</b> classifies packets into bands based on their priority.
See the pfifo_fast queue disc section of the Traffic Control Layer model
for more information.
</li>
<li>A new class <b>SpectrumWifiPhy</b> has been introduced that makes use of the
Spectrum module. Its functionality and API is currently very similar to that
of the YansWifiPhy, especially because it reuses the same InterferenceHelper
and ErrorModel classes (for this release). Some example programs in the
'examples/wireless/' directory, such as 'wifi-spectrum-per-example.cc',
illustrate how the SpectrumWifiPhy class can be substituted for the default
YansWifiPhy PHY model.
</li>
<li>We have added support for generating traces for the
<a href="https://wilseypa.github.io/desMetrics">DES Metrics</a> project.
These can be enabled by adding <tt>--enable-des-metrics</tt> at configuration;
you must also use <tt>CommandLine</tt> in your script. See the API docs
for class <b>DesMetrics</b> for more details.
</li>
<li> The traffic control module now includes the <b>FQ-CoDel</b> and <b>PIE</b> queue disc
models, and behavior corresponding to Linux <b>Byte Queue Limits (BQL)</b>.
</li>
<li> Several new TCP congestion control variants were introduced, including
<b>TCP Vegas, Scalable, Veno, Illinois, Bic, YeAH, and H-TCP</b>
congestion control algorithms.
</li>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li><b>SocketAddressTag</b> was a long-standing approach to approximate the POSIX
socket recvfrom behavior (i.e., to know the source address of a packet)
without actually calling RecvFrom. Experience with this revealed that
this option was difficult to use with tunnels (the new tag has to
replace the old one). Moreover, there is no real need
to create a new API when there is a an existing one (i.e., RecvFrom).
As a consequence, SocketAddressTag has been completely removed from ns-3.
Users can use RecvFrom (for UDP), GetPeerName (for TCP), or similar.
</li>
<li><b>InetSockAddress</b> can now store a ToS value, which can be set through its
SetTos method. The Bind and Connect methods of UDP (UdpSocketImpl) and
TCP (TcpSocketBase) sockets set the socket ToS value to the value provided
through the address input parameter (of type InetSockAddress). See the
Socket options section of the Network model for more information.
</li>
<li>The <b>QosTag</b> is removed as it has been superseded by the SocketPriorityTag.</li>
<li>The <b>Ipv4L3Protocol::DefaultTos</b> attribute is removed.</li>
<li>The attributes <b>YansWifiPhy::Frequency, YansWifiPhy::ChannelNumber, and
YansWifiPhy::ChannelWidth</b>, and the related accessor methods, were moved to
base class WifiPhy. YansWifiPhy::GetChannelFrequencyMhz() was deleted.
A new method WifiPhy::DefineChannelNumber () was added to allow users to
define relationships between channel number, standard, frequency, and channel width.
</li>
<li>The class <b>WifiSpectrumValueHelper</b> has been refactored; previously it
was an abstract base class supporting the WifiSpectrumValue5MhzFactory spectrum
model. It now contains various static member methods supporting the creation
of power spectral densities with the granularity of a Wi-Fi OFDM subcarrier
bandwidth. The class <b>WifiSpectrumValue5MhzFactory</b> and its API remain but
it is not subclassed.
</li>
<li>A new Wifi method <b>InterferenceHelper::AddForeignSignal</b> has been introduced to
support use of the SpectrumWifiPhy (so that non-Wi-Fi signals may be handled
as noise power).
</li>
<li>A new Wifi attribute <b>Dcf::TxopLimit</b> has been introduced to add support for 802.11e TXOP.
</li>
</ul>
<h2>Changes to build system:</h2>
<ul>
<li> A new waf build option, <tt>--check-config</tt>, was added to allow users to print the current configuration summary, as appears at the end of ./waf configure. See bug 2459 for discussion.</li>
<li> The <tt>configure</tt> summary is now sorted, to make it easier to check the status of optional features.</li>
</ul>
<h2>Changed behavior:</h2>
This section is for behavioral changes to the models that were not due to a bug fix.
<ul>
<li>The relationship between Wi-Fi channel number, frequency, channel width,
and Wi-Fi standard has been revised (see bug 2412). Previously, ChannelNumber
and Frequency were attributes of class YansWifiPhy, and the frequency was
defined as the start of the band. Now, Frequency has been redefined to be
the center frequency of the channel, and the underlying device relies on
the pair of frequency and channel width to control behavior; the channel
number and Wi-Fi standard are used as attributes to configure frequency
and channel width. The wifi module documentation discusses this change
and the new behavior.
</li>
<li>AODV now honors the TTL in RREQ/RREP and it uses a method
compliant with <a href="http://www.ietf.org/rfc/rfc3561.txt">RFC 3561</a>. The node search radius is increased progressively. This could increase
slightly the node search time, but it also decreases the network
congestion.
</li>
</ul>
<hr>
<h1>Changes from ns-3.24 to ns-3.25</h1>
<h2>New API:</h2>
<ul>
<li> In 'src/internet/test', a new environment is created to test TCP properties.</li>
<li> The 'src/traffic-control' module has been added, with new API for adding and configuring queue discs and packet filters.</li>
<li> Related to traffic control, a new interface has been added to the
NetDevice to provide a queue interface to access device queue state and
register callbacks used for flow control.</li>
<li> In 'src/wifi', a new rate control (MinstrelHT) has been added for
802.11n/ac modes.</li>
<li> In 'src/wifi', a new helper (WifiMacHelper) is added and is a merged helper from all previously existing MAC helpers (NqosWifiMacHelper, QosWifiMacHelper, HtWifiMacHelper and VhtWifiMacHelper).</li>
<li> It is now possible to use RIPv2 in IPv4 network simulations.</li>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li>TCP-related changes:
<ul>
<li>Classes TcpRfc793, TcpTahoe, and TcpReno were removed.</li>
<li>The 'TcpNewReno' log component was effectively replaced by 'TcpCongestionOps'
<li>TCP Hybla and HighSpeed have been added.</li>
<li>Added the concept of Congestion State Machine inside TcpSocketBase.</li>
<li>Merged Fast Recovery and Fast Retransmit inside TcpSocketBase.</li>
<li>Some member variables have been moved from TcpSocketBase inside TcpSocketState. Attributes are not touched.</li>
<li>Congestion control split from TcpSocketBase as subclass of TcpCongestionOps.</li>
<li>Added Rx and Tx callbacks on TcpSocketBase.</li>
<li>Added BytesInFlight trace source on TcpSocketBase. The trace is updated when the implementation requests the value.</li>
<li>Added attributes about the number of connection and data retransmission attempts.</li>
</ul>
</li>
<li> ns-3 is now capable of serializing SLL (a.k.a. cooked) headers.
This is used in DCE to allow the generation of pcap directly readable by wireshark.
</li>
<li> In the WifiHelper class in the wifi module, Default has been declared deprecated. This is now immediately handled by the constructor of the class.</li>
<li> The API for configuring 802.11n/ac aggregation has been modified to be more user friendly. As any MAC layer attributes, aggregation parameters can now also be configured through WifiMacHelper::SetType. </li>
<li> The class Queue and subclasses derived from it have been changed in two ways:
<ul>
<li>Queues no longer enqueue simple Packets but instead enqueue QueueItem objects, which include Packet but possibly other information such as headers.</li>
<li>The attributes governing the mode of operation (packets or bytes) and the maximum size have been moved to base class Queue.</li>
</ul>
</li>
<li> Users of advanced queues (RED, CoDel) who have been using them directly in the NetDevice will need to adjust to the following changes:
<ul>
<li> RED and CoDel are no longer specializations of the Queue class, but are now specializations of the new QueueDisc class. This means that RED and CoDel can now be installed in the context of the new Traffic Control layer instead of as queues in (some) NetDevices. The reason for such a change is to make the ns-3 stack much more similar to that of real operating systems (Linux has been taken as a reference). Queuing disciplines such as RED and CoDel can now be tested with all the NetDevices, including WifiNetDevices. </li>
<li> NetDevices still use queues to buffer packets. The only subclass of Queue currently available for this purpose is DropTailQueue. If one wants to approximate the old behavior, one needs to set the DropTailQueue MaxPackets attribute to very low values, e.g., 1.</li>
<li> The Traffic Control layer features a mechanism by which packets dropped by the NetDevice are requeued in the queue disc (more precisely: if NetDevice::Send returns false, the packet is requeued), so that they are retransmitted later. This means that the MAC drop traces may include packets that have not been actually lost, because they have been dropped by the device, requeued by the traffic control layer and successfully retransmitted. To get the correct number of packets that have been actually lost, one has to subtract the number of packets requeued from the number of packets dropped as reported by the MAC drop trace. </li>
</ul>
</li>
</ul>
<h2>Changes to build system:</h2>
<ul>
<li> Waf was upgraded to 1.8.19</li>
<li> A new waf build option, --check-profile, was added to allow users to check the currently active build profile. It is discussed in bug 2202 in the tracker.</li>
</ul>
<h2>Changed behavior:</h2>
This section is for behavioral changes to the models that were not due to a bug fix.
<ul>
<li>TCP behavioral changes:
<ul>
<li>TCP closes connection after a number of failed segment retries,
rather than trying indefinitely. The maximum number of retries, for both SYN
attempts and data attempts, is controlled by attributes.</li>
<li>Congestion algorithms not compliant with Fast Retransmit
and Fast Recovery (TCP 793, Reno, Tahoe) have been removed.</li>
</ul>
</li>
<li> 802.11n/ac MPDU aggregation is now enabled by default for both AC_BE and AC_VI.</li>
<li> The introduction of the traffic control layer leads to some additional buffering by default in the stack; when a device queue fills up, additional packets become enqueued at the traffic control layer.</li>
</ul>
<hr>
<h1>Changes from ns-3.23 to ns-3.24</h1>
<h2>New API:</h2>
<ul>
<li>In 'src/wifi', several changes were made to enable partial 802.11ac support:
<ul>
<li>A new helper (VhtWifiMacHelper) was added to set up a Very high throughput (VHT) MAC entity.</li>
<li>A new standard value has been added that enables the new 11ac data rates.</li>
<li>A new 11ac preamble has been added.</li>
<li>A new information element has been added: VhtCapabilities. This information element is added to the MAC frame header if the node is a VHT node. This VhtCapabilites information element is used to advertise the VHT capabilities of the node to other nodes in the network.</li>
</ul>
</li>
<li>The ArpCache API was extended to allow the manual removal of ArpCache entries and the addition of permanent (static) entries for IPv4.
</li>
<li> The SimpleChannel in the 'network' module now allows per-NetDevice blacklists, in order to do hidden terminal testcases.
</li>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li> The signatures on several TcpHeader methods were changed to take const arguments.</li>
<li> class TcpL4Protocol replaces Send() methods with SendPacket(), and adds new methods to AddSocket() and RemoveSocket() from a node. Also, a new PacketReceived() method was introduced to get the TCP header of an incoming packet and check its checksum.</li>
<li> The CongestionWindow and SlowStartThreshold trace sources have been moved from the TCP subclasses such as NewReno, Reno, Tahoe, and Westwood to the TcpSocketBase class.</li>
<li> The WifiMode object has been refactored:
<ul>
<li>11n data rates are now renamed according to their MCS value. E.g. OfdmRate65MbpsBW20MHz has been renamed into HtMcs7. 11ac data rates have been defined according to this new renaming.</li>
<li>HtWifiMacHelper and VhtWifiMacHelper provide a helper to convert a MCS value into a data rate value.</li>
<li>The channel width is no longer tied to the wifimode. It is now included in the TXVECTOR.</li>
<li>The physical bitrate is no longer tied to the wifimode. It is computed based on the selected wifimode and on the TXVECTOR parameters (channel width, guard interval and number of spatial streams).</li>
</ul>
</li>
</ul>
<h2>Changes to build system:</h2>
<ul>
<li> Waf was upgraded to 1.8.12</li>
<li> Waf scripts and test.py test runner program were made compatible with Python 3</li>
</ul>
<h2>Changed behavior:</h2>
This section is for behavioral changes to the models that were not due to a bug fix.
<ul>
</ul>
<hr>
<h1>Changes from ns-3.22 to ns-3.23</h1>
<h2>New API:</h2>
<ul>
<li> The mobility module includes a GeographicPositions class used to
convert geographic to cartesian coordinates, and to generate randomly
distributed geographic coordinates.
</li>
<li> The spectrum module includes new TvSpectrumTransmitter classes and helpers to create television transmitter(s) that transmit PSD spectrums customized by attributes such as modulation type, power, antenna type, channel frequency, etc.
</li>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li> In LteSpectrumPhy, LtePhyTxEndCallback and the corresponding methods have been removed, since they were unused.
</li>
<li> In the DataRate class in the network module, CalculateTxTime has been declared deprecated. CalculateBytesTxTime and CalculateBitsTxTime are to be used instead. The return value is a Time, instead of a double.
</li>
<li> In the Wi-Fi InterferenceHelper, the interference event now takes the WifiTxVector as an input parameter, instead of the WifiMode. A similar change was made to the WifiPhy::RxOkCallback signature.
</li>
</ul>
<h2>Changes to build system:</h2>
<ul>
<li> None </li>
</ul>
<h2>Changed behavior:</h2>
This section is for behavioral changes to the models that were not due to a bug fix.
<ul>
<li> In Wi-Fi, HT stations (802.11n) now support two-level aggregation. The InterferenceHelper now distinguishes between the PLCP and regular payload reception, for higher fidelity modeling. ACKs are now sent using legacy rates and preambles. Access points now establish BSSBasicRateSet for control frame transmissions. PLCP header and PLCP payload reception have been decoupled to improve PHY layer modeling accuracy. RTS/CTS with A-MPDU is now fully supported.
</li>
<li> The mesh module was made more compliant to the IEEE 802.11s-2012 standard and packet traces are now parseable by Wireshark.
</li>
</ul>
<hr>
<h1>Changes from ns-3.21 to ns-3.22</h1>
<h2>New API:</h2>
<ul>
<li> New classes were added for the PARF and APARF WiFi power and rate control mechanisms.
</li>
<li> Support for WiFi 802.11n MPDU aggregation has been added.
</li>
<li> Additional support for modeling of vehicular WiFi networks has been added, including the channel-access coordination feature of IEEE 1609.4. In addition, a Basic Safety Message (BSM) packet generator and related statistics-gathering classes have been added to the wave module.
</li>
<li> A complete LTE release bearer procedure is now implemented which can be invoked by calling the new helper method LteHelper::DeActivateDedicatedEpsBearer ().
</li>
<li> It is now possible to print the Neighbor Cache (ARP and NDISC) by using
the RoutingProtocolHelper
</li>
<li> A TimeProbe class has been added to the data collection framework in
the stats module, enabling TracedValues emitting values of type
ns3::Time to be handled by the framework.
</li>
<li> A new attribute 'ClockGranularity' was added to the TcpSocketBase class,
to control modeling of RTO calculation.
</li>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li> Several deprecated classes and class methods were removed, including EmuNetDevice, RandomVariable and derived classes, Packet::PeekData(), Ipv6AddressHelper::NewNetwork(Ipv6Address, Ipv6Prefix), Ipv6InterfaceContainer::SetRouter(), Ipv4Route::GetOutputTtl(), TestCase::AddTestCase(TestCase*), and TestCase::GetErrorStatus().
</li>
<li> Print methods involving routing tables and neighbor caches, in classes Ipv4RoutingHelper and Ipv6RoutingHelper, were converted to static methods.
</li>
<li>PointerValue attribute types in class UanChannel (NoiseModel), UanPhyGen (PerModel and SinrModel), UanPhyDual (PerModelPhy1, PerModelPhy2, SinrModelPhy1, and SinrModelPhy2), and SimpleNetDevice (TxQueue), were changed from PointerValue type to StringValue type, making them configurable via the Config subsystem.
</li>
<li> WifiPhy::CalculateTxDuration() and WifiPhy::GetPayloadDurationMicroSeconds () now take an additional frequency parameter.
</li>
<li> The attribute 'Recievers' in class YansWifiPhy was misspelled, so
this has been corrected to 'Receivers'.
</li>
<li> We have now documented the callback function signatures
for all TracedSources, using an extra (fourth) argument to
TypeId::AddTraceSource to pass the fully-qualified name
of the signature typedef. To ensure that future TraceSources
are similarly documented, the three argument version of
AddTraceSource has been deprecated.
</li>
<li> The "MinRTO" attribute of the RttEstimator class was moved to the TcpSocketBase class. The "Gain" attribute of the RttMeanDeviation class was replaced
by new "Alpha" and "Beta" attributes.
</li>
<li> Attributes of the TcpTxBuffer and TcpRxBuffer class are now accessible through the TcpSocketBase class.
</li>
<li> The LrWpanHelper class has a new constructor allowing users to configure a MultiModelSpectrumChannel as an option, and also provides Set/Get API to allow users to access the underlying channel object.
</li>
</ul>
<h2>Changes to build system:</h2>
<ul>
<li> waf was upgraded to version 1.7.16
</li>
</ul>
<h2>Changed behavior:</h2>
This section is for behavioral changes to the models that were not due to a bug fix.
<ul>
<li> The default value of the `Speed` attribute of ConstantSpeedPropagationDelayModel was changed from 300,000,000 m/s to 299,792,458 m/s (speed of light in a vacuum), causing propagation delays using this model to vary slightly.
</li>
<li> The LrWpanHelper object was previously instantiating only a LogDistancePropagationLossModel on a SingleModelSpectrumChannel, but no PropagationDelayModel. The constructor now adds by default a ConstantSpeedPropagationDelayModel.
</li>
<li> The Nix-vector routing implementation now uses a lazy flush mechanism,
which dramatically speeds up the creation of large topologies.
</li>
</ul>
<hr>
<h1>Changes from ns-3.20 to ns-3.21</h1>
<h2>New API:</h2>
<ul>
<li> New "const double& SpectrumValue:: operator[] (size_t index) const".
</li>
<li> A new TraceSource has been added to TCP sockets: SlowStartThreshold.
</li>
<li> New method CommandLine::AddValue (name, attibutePath) to provide a
shorthand argument "name" for the Attribute "path". This also has
the effect of including the help string for the Attribute in the
Usage message.
</li>
<li> The GSoC 2014 project in the LTE module has brought some additional APIs:
<ul>
<li>a new abstract class LteFfrAlgorithm, which every future
implementation of frequency reuse algorithm should inherit from</li>
<li>a new SAPs: one between MAC Scheduler and FrAlgorithm, one between
RRC and FrAlgorithm</li>
<li>new attribute to enable Uplink Power Control in LteUePhy</li>
<li>new LteUePowerControl class, an implementation of Uplink Power Control, which is
configurable by attributes. ReferenceSignalPower is sent by eNB in SIB2.
Uplink Power Control in Closed Loop Accumulative Mode is enabled by default</li>
<li>seven different Frequency Reuse Algorithms (each has its own attributes): </li>
<ul>
<li>LteFrNoOpAlgorithm</li>
<li>LteFrHardAlgorithm</li>
<li>LteFrStrictAlgorithm</li>
<li>LteFrSoftAlgorithm</li>
<li>LteFfrSoftAlgorithm</li>
<li>LteFfrEnhancedAlgorithm</li>
<li>LteFfrDistributedAlgorithm</li>
</ul>
<li>attribute in LteFfrAlgorithm to set FrCellTypeId which is used in automatic
Frequency Reuse algorithm configuration</li>
<li>LteHelper has been updated with new methods related to frequency reuse algorithm:
SetFfrAlgorithmType and SetFfrAlgorithmAttribute</li>
</ul>
</li>
<li> A new SimpleNetDeviceHelper can now be used to install SimpleNetDevices.
</li>
<li> New PacketSocketServer and PacketSocketClient apps, meant to be used in tests.
</li>
<li> Tcp Timestamps and Window Scale options have been added and are enabled by default (controllable by attribute).
</li>
<li> A new CoDel queue model has been added to the 'internet' module.
</li>
<li> New test macros NS_TEST_ASSERT_MSG_GT_OR_EQ() and NS_TEST_EXPECT_MSG_GT_OR_EQ() have been added.
</li>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li> "Icmpv6L4Protocol::ForgeEchoRequest" is now returning a packet with the proper IPv6 header.
</li>
<li> The TCP socket Attribute "SlowStartThreshold" has been renamed "InitialSlowStartThreshold" to
clarify that the effect is only on the initial value.
</li>
<li> all schedulers were updated to interact with FR entity via FFR-SAP. Only PF, PSS, CQA,
FD-TBFQ, TD-TBFQ schedulers supports Frequency Reuse functionality. In the beginning
of scheduling process, schedulers ask FR entity for available RBGs and then ask if UE
can be scheduled on RB</li>
<li> eNB RRC interacts with FFR entity via RRC-FFR SAP</li>
<li> new DL-CQI generation approach was implemented. Now DL-CQI is computed from control channel as signal
and data channel (if received) as interference. New attribute in LteHelper was added to specify
DL-CQI generation approach. New approach is default one in LteHelper </li>
<li> RadioEnvironmentMap can be generated for Data or Control channel and for specified RbId;
Data or Control channel and RbId can be configured by new attributes in RadioEnvironmentMapHelper </li>
<li> lte-sinr-chunk-processor refactored to lte-chunk-processor. Removed all lte-xxx-chunk-processor
implementations</li>
<li> BindToNetDevice affects also sockets using IPv6.</li>
<li> BindToNetDevice now calls implicitly Bind (). To bind a socket to a NetDevice and to a specific address,
the correct sequence is Bind (address) - BindToNetDevice (device). The opposite will raise an error.</li>
</ul>
<h2>Changes to build system:</h2>
<ul>
<li> None for this release. </li>
</ul>
<h2>Changed behavior:</h2>
<ul>
<li> Behavior will be changed due to the list of bugs fixed (listed in RELEASE_NOTES); users are requested to review that list as well.
</ul>
<hr>
<h1>Changes from ns-3.19 to ns-3.20</h1>
<h2>New API:</h2>
<ul>
<li> Models have been added for low-rate, wireless personal area networks
(LR-WPAN) as specified by IEEE standard 802.15.4 (2006). The current
emphasis is on the unslotted mode of 802.15.4 operation for use in Zigbee,
and the scope is limited to enabling a single mode (CSMA/CA) with basic
data transfer capabilities. Association with PAN coordinators is not yet
supported, nor the use of extended addressing. Interference is modeled as
AWGN but this is currently not thoroughly tested. The NetDevice Tx queue
is not limited, i.e., packets are never dropped due to queue becoming full.
They may be dropped due to excessive transmission retries or channel access
failure. </li>
<li> A new IPv6 routing protocol has been added: RIPng. This protocol is
an Interior Gateway Protocol and it is available in the Internet module. </li>
<li> A new LTE MAC downlink scheduling algorithm named Channel and QoS
Aware (CQA) Scheduler is provided by the new "ns3::CqaFfMacScheduler" object.
</li>
<li> Units may be attached to Time objects, to facilitate specific output
formats (see Time::As()) </li>
<li> FlowMonitor "SerializeToXml" functions are now directly available
from the helper. </li>
<li> Access to OLSR's HNA table has been enabled </li>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li> The SixLowPan model can now use uncompressed IPv6 headers. An option to
define the minimum compressed packet size has been added. </li>
<li> MinDistance wsa replaced by MinLoss in FriisPropagationLossModel, to
better handle conditions outside of the assumed far field region. </li>
<li> In the DSR model, the attribute DsrOptionRerrHeader::ErrorType" has
been removed. </li>
</ul>
<h2>Changes to build system:</h2>
<ul>
<li> Python 3.3 is now supported for Python bindings for ns-3. Python 3.3
support for API scanning is not supported. Python 3.2 is not supported.</li>
<li> Enable selection of high precision int64x64_t implementation
at configure time, for debugging purposes.</li>
<li> Optimized builds are now enabling signed overflow optimization
(-fstrict-overflow) and for gcc 4.8.2 and greater, also warning for cases
where an optimizization may occur due to compiler assumption that
overflow will not occur. </li>
</ul>
<h2>Changed behavior:</h2>
<ul>
<li> The Internet FlowMonitor can now track IPv6 packets. </li>
<li> Ipv6Extension::m_dropTrace has been removed. Ipv6L3Protocol::m_dropTrace
is now fired when appropriate. </li>
<li> IPv4 identification field value is now dependent on the protocol
field. </li>
<li> Point-to-point trace sources now contain PPP headers </li>
</ul>
<hr>
<h1>Changes from ns-3.18.1 to ns-3.19</h1>
<h2>New API:</h2>
<ul>
<li> A new wifi extension for vehicular simulation support is available in the
src/wave directory. The current code represents an interim capability to
realize an IEEE 802.11p-compliant device, but without the WAVE extensions
(which are planned for a later patch). The WaveNetDevice modelled herein
enforces that a WAVE-compliant physical layer (at 5.9 GHz) is selected, and
does not require any association between devices (similar to an adhoc WiFi
MAC), but is otherwise similar (at this time) to a WifiNetDevice. WAVE
capabililties of switching between control and service channels, or using
multiple radios, are not yet modelled.
</li>
<li>New SixLowPanNetDevice class providing a shim between
IPv6 and real NetDevices. The new module implements 6LoWPAN:
"Transmission of IPv6 Packets over IEEE 802.15.4 Networks" (see
<a href="http://www.ietf.org/rfc/rfc4944.txt">RFC 4944</a> and
<a href="http://www.ietf.org/rfc/rfc6262.txt">RFC 6262</a>),
resulting in a heavy header compression for IPv6 packets.
The module is intended to be used on 802.15.4 NetDevices, but
it can be used over other NetDevices. See the manual for
further discussion.
</li>
<li> LteHelper has been updated with some new APIs:
<ul>
<li>new overloaded Attach methods to enable UE to automatically determine
the eNodeB to attach to (using initial cell selection);</li>
<li>new methods related to handover algorithm: SetHandoverAlgorithmType
and SetHandoverAlgorithmAttribute;</li>
<li>a new attribute AnrEnabled to activate/deactivate Automatic Neighbour
Relation (ANR) function; and</li>
<li>a new method SetUeDeviceAttribute for configuring LteUeNetDevice.</li>
</ul>
</li>
<li> The GSoC 2013 project in the LTE module has brought some additional APIs:
<ul>
<li>a new abstract class LteHandoverAlgorithm, which every future
implementation of automatic handover trigger should inherit from;</li>
<li>new classes LteHandoverAlgorithm and LteAnr as sub-modules of
LteEnbNetDevice class; both interfacing with the LteEnbRrc sub-module
through Handover Management SAP and ANR SAP;</li>
<li>new attributes in LteEnbNetDevice and LteUeNetDevice classes related
to Closed Subscriber Group (CSG) functionality in initial cell
selection;</li>
<li>new attributes in LteEnbRrc for configuring UE measurements' filtering
coefficient (i.e., quantity configuration);</li>
<li>a new public method AddUeMeasReportConfig in LteEnbRrc for setting up
custom UE measurements' reporting configuration; measurement reports
can then be captured from the RecvMeasurementReport trace source;
and</li>
<li>new trace sources in LteUeRrc to capture more events, such as System
Information messages (MIB, SIB1, SIB2), initial cell selection, random
access, and handover.</li>
</ul>
</li>
<li>A new parallel scheduling algorithm based on null messages, a common
parallel DES scheduling algorithm, has been added. The null message
scheduler has better scaling properties when running on some scenarios
with large numbers of nodes since it does not require a global
communication.
</li>
</ul>
<h2>Changes to existing API:</h2>
<ul>
<li> It is now possible to use Ipv6PacketInfoTag from UDP applications in the
same way as with Ipv4PacketInfoTag. See Doxygen for current limitations in
using Ipv[4,6]PacketInfoTag to set IP properties.</li>
<li>A change is introduced for the usage of the EpcHelper
class. Previously, the EpcHelper class included both the API
definition and its (only) implementation; as such, users would
instantiate and use the EpcHelper class directly in their
simulation programs. From now on,
EpcHelper is just the base class defining the API, and the
implementation has been moved to derived classes; as such,
users are now expected to use one of the derived classes in
their simulation program. The implementation previously
provided by the EpcHelper class has been moved to the new
derived class PointToPointEpcHelper.</li>
<li> The automatic handover trigger and ANR functions in LTE module have been
moved from LteEnbRrc class to separate classes. As a result, the related
attributes, e.g., ServingCellHandoverThreshold, NeighbourCellHandoverOffset,
EventA2Threshold, and EventA4Threshold have been removed from LteEnbRrc
class. The equivalent attributes are now in A2A4RsrqHandoverAlgorithm and
LteAnr classes.</li>
<li> Master Information Block (MIB) and System Information Block Type 1 (SIB1)
are now transmitted as LTE control messages, so they are no longer part of
RRC protocol.</li>
<li> UE RRC state model in LTE module has been considerably modified and is
not backward compatible with the previous state model.</li>
<li> Additional time units (Year, Day, Hour, Minute) were added to the time
value class that represents simulation time; the largest unit prior to
this addition was Second.
</li>
<li> SimpleNetDevice and SimpleChannel are not so simple anymore. SimpleNetDevice can be now a
Broadcast or PointToPoint NetDevice, it can have a limited bandwidth and it uses an output
queue.
</li>
</ul>
<h2>Changes to build system:</h2>
<h2>Changed behavior:</h2>
<ul>
<li> For the TapBridge device, in UseLocal mode there is a MAC learning function. TapBridge has been waiting for the first packet received from tap interface to set the address of the bridged device to the source address of the first packet. This has caused problems with WiFi. The new behavior is that after connection to the tap interface, ns-3 learns the MAC address of that interface with a system call and immediately sets the address of the bridged device to the learned one. See <a href="https://www.nsnam.org/bugzilla/show_bug.cgi?id=1777">bug 1777</a> for more details.</li>
<li> TapBridge device now correctly implements IsLinkUp() method.</li>
<li> IPv6 addresses and routing tables are printed like in Linux "route -A inet6" command.</li>
<li> A change in Ipv[4,6]Interface enforces the correct behaviour of IP
when a device do not support the minimum MTU requirements.
This is set to 68 and 1280 octects respectively. IP simulations that
may have run over devices with smaller MTUs than 68 or 1280, respectively,