Replies: 18 comments 3 replies
-
|
Your image quality is very bad and therefore the ESP32 cannot recognize/evaluate the alignment markings correctly.
|
Beta Was this translation helpful? Give feedback.
-
|
ok, I'll try it |
Beta Was this translation helpful? Give feedback.
-
|
I improved the picture.
|
Beta Was this translation helpful? Give feedback.
-
|
How are your settings? Have you activated CheckDigitIncreaseConsistency? |
Beta Was this translation helpful? Give feedback.
-
|
it is checked:
|
Beta Was this translation helpful? Give feedback.
-
|
Try to deactivate it, that may help. |
Beta Was this translation helpful? Give feedback.
-
|
I had a similar problem after the update - the picture was way darker then before, so the alignment did not work. |
Beta Was this translation helpful? Give feedback.
-
|
https://jomjol.github.io/AI-on-the-edge-device-docs/Parameters/ |
Beta Was this translation helpful? Give feedback.
-
|
The numbers a recognized, but not sent via MQTT...
I'm using this model:
I disabled CheckDigitIncreaseConsistency, let's see if it helps |
Beta Was this translation helpful? Give feedback.
-
i played a around with a few parameters. Now the image quality increased a little bit. recognition is better now |
Beta Was this translation helpful? Give feedback.
-
|
seems not to work, switching back |
Beta Was this translation helpful? Give feedback.
-
|
The Recognized Page only serves for diagnostic purposes and is calculated very differently.
|
Beta Was this translation helpful? Give feedback.
-
|
I disabled the "higher" ROI's for the moment.
Now it's working, once the counter "jumps" further I'll add them step by step.... |
Beta Was this translation helpful? Give feedback.
-
|
I still have the issue tha the RAW value is ok ,but not sent via MQTT: |
Beta Was this translation helpful? Give feedback.
-
|
here's the logfile (DEBUG LEVEL) when the round is run: |
Beta Was this translation helpful? Give feedback.
-
|
So my question is, why is value not sent while the RAW value is correct? |
Beta Was this translation helpful? Give feedback.
-
|
the weird thing is, that the correct value is sent after a few rounds.... |
Beta Was this translation helpful? Give feedback.
-
|
I suspected that your WiFi connection is very bad (WIFI Signal (RSSI): -85dBm) and thereby arise problems with sending. |
Beta Was this translation helpful? Give feedback.
-
|
In your log you can see that the ESP32 always sends in time: [0d00h03m07s] 2025-03-16T05:52:02 <DBG> [FLOWCTRL] Status: Aligning (05:52:02)
[0d00h03m07s] 2025-03-16T05:52:02 <DBG> [MQTT IF] Published topic: watermeter1/status, content: Aligning (msg_id=24)
[0d00h03m20s] 2025-03-16T05:52:16 <DBG> [FLOWCTRL] Status: Digitization of ROIs (05:52:16)
[0d00h03m20s] 2025-03-16T05:52:16 <DBG> [MQTT IF] Published topic: watermeter1/status, content: Digitization of ROIs (msg_id=25)
[0d00h03m24s] 2025-03-16T05:52:19 <DBG> [FLOWCTRL] Status: Post-Processing (05:52:19)
[0d00h03m24s] 2025-03-16T05:52:19 <DBG> [MQTT IF] Published topic: watermeter1/status, content: Post-Processing (msg_id=26)
[0d00h03m24s] 2025-03-16T05:52:19 <INF> [POSTPROC] main: Raw: 1.357, Value: 1.355, Status: no error
[0d00h03m24s] 2025-03-16T05:52:19 <DBG> [FLOWCTRL] Status: Sending MQTT (05:52:19)
[0d00h03m24s] 2025-03-16T05:52:19 <DBG> [MQTT IF] Published topic: watermeter1/status, content: Sending MQTT (msg_id=27) |
Beta Was this translation helpful? Give feedback.
-
but not watermeter1/value .... |
Beta Was this translation helpful? Give feedback.
-
[0d00h03m24s] 2025-03-16T05:52:19 <DBG> [MQTT] Publishing MQTT topics...
[0d00h03m24s] 2025-03-16T05:52:19 <DBG> [MQTT IF] Published topic: watermeter1/main/value, content: 1.355 (msg_id=33) <<<<<<<<<<<<<<<<<<<<<<<<
[0d00h03m24s] 2025-03-16T05:52:19 <DBG> [MQTT IF] Published topic: watermeter1/main/error, content: no error (msg_id=34)
[0d00h03m24s] 2025-03-16T05:52:19 <DBG> [MQTT IF] Published topic: watermeter1/main/rate, content: 0.000000 (msg_id=35) |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
The Problem
I used before 15.6.0, everything was working....
Now I changed to 16.0.0
The reference image is this:
in the overview page it look'S like this:
Any suggestion?
Thanks ahead
Version
Release: v16.0.0 (Commit: f542d84)
Logfile
Expected Behavior
Picture is used and shown in correct orientation
Screenshots
No response
Additional Context
No response
Beta Was this translation helpful? Give feedback.
All reactions