Web GUI shows no data

[StefanDierkes]

Actually (version 16.0.0) the web GUI shows no data anymore:

Tested with Firefox 141.0, and Google Chrome 138.0.7204.169 and Safari 18.5 for MacOS 13.7.6 and Safari for iPadOS (18.6 and 26 beta4)

Several restarts by disconnecting the power supply did not help.

The MQTT transfer works fine, but trouble shooting and configuration is no longer possible.

[SybexX]

What does the web-console show?

Open web-console with Firefox:

[StefanDierkes]

I just tried the update, but it didn't work:

[SybexX]

https://github.com/jomjol/AI-on-the-edge-device/releases/download/v16.0.0/AI-on-the-edge-device__manual-setup__v16.0.0.zip

It is best to create a backup of the SD beforehand.
You have to take the wlan.ini your old ones, or enter your wifi access data on the new wlan.ini.

[StefanDierkes]

OK. I have the https://github.com/jomjol/AI-on-the-edge-device/releases/download/v16.0.0/AI-on-the-edge-device__manual-setup__v16.0.0.zip and its subdirectory sd-card.zip unpacked. I also made a backup of the SD.

Which files should I copy to my sd-card witout overwriting my config? Is /html/ perhaps sufficient?

[SybexX]

I would make the setting again, as many new setting parameters and functions have been added in the new version.

[StefanDierkes]

OK. I will try so.

[StefanDierkes]

Finally, with a lot of problems in-between, I managed it to install 16.0.0 and configure my AI on the edge agin.
The problem was indeed a difference between the firmware version and the web interface version.

Thank you very much for your help!