Camera init failed after update 15.7 to 16.0 #3714
Description
The Problem
After upgrade attempt from 15.7 to 16.0 my setup refuses to initialize.
With 16.0 firmware the device just displays:
AI on the Edge Device
We have one or more critical errors:
0x00000004
If I OTA it back to 15.7, everything works again.
15.7 reports the camera as
[0d00h00m04s] 2025-04-19T21:28:26 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
and works fine.
Was there some known hardware discontinuation? I don't think it is an electrical issue like the wiki article suggests, because it's running fine on previous releases without it being touched.
Version
16.0
Logfile
[0d00h00m00s] 2025-04-19T20:38:46 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-04-19T20:38:46 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-04-19T20:38:46 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-04-19T20:38:46 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-04-19T20:38:47 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-04-19T20:38:47 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-04-19T20:38:47 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m02s] 2025-04-19T20:38:49 <WRN> [MAIN] Camera init failed (0x105), retrying...
[0d00h00m05s] 2025-04-19T20:38:51 <ERR> [MAIN] Camera init failed (0x105)! Check camera module and/or proper electrical connection
[0d00h00m05s] 2025-04-19T20:38:52 <ERR> [HELPER] New System Status: 0x00000004Expected Behavior
Version 16.0 should support cameras, which worked under previous releases.
Screenshots
No response
Additional Context
No response