Konfigurationsseite nicht vorhanden #3720
Description
The Problem
Hallo,
Ich habe das Problem, dass ich die Konfigurationsseite nicht laden kann. Somit kann ich mqtt nicht einrichten.
Ich nutze die aktuelle Version.
Ich habe auch schon ein Update über ota geladen. Dabei kommt es dann zu einem neuen Problem, das der Ordner html gelöscht wird und ich diesen Ordner wieder zurück auf die Karte kopieren muss.
Dazu muss ich eine txt datei mit Version.txt hinzufügen. Dann startet alles normal aber komme dann immer noch nicht auf die Konfigurationsseite.
Oder ist im Logfile etwas zu entnehmen?
Weil sonst läuft es.
Version
V16.0.0
Logfile
==================== Start ======================
[0d00h00m00s] 2025-04-27T00:05:19 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-04-27T00:05:19 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-04-27T00:05:19 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-04-27T00:05:19 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-04-27T00:05:19 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-04-27T00:05:22 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m03s] 2025-04-27T00:05:22 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m03s] 2025-04-27T00:05:22 <INF> [SNTP] Configuring NTP Client...
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [SNTP] Time is already set: 2025-04-27 02:05:22
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: ?
[0d00h00m03s] 2025-04-27T02:05:22 <WRN> [MAIN] Failed to read file html/version.txt to parse Web UI version
[0d00h00m03s] 2025-04-27T02:05:22 <WRN> [MAIN] Web UI version (?) does not match firmware version (f542d84)
[0d00h00m03s] 2025-04-27T02:05:22 <WRN> [MAIN] Recommendation: Repeat installation using AI-on-the-edge-device__update__*.zip
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [WLANINI] SSID: WLAN-BF9M9M
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [WIFI] Set hostname to: watermeter
[0d00h00m03s] 2025-04-27T02:05:22 <INF> [WIFI] Init successful
[0d00h00m07s] 2025-04-27T02:05:26 <INF> [WIFI] Connected to: WLAN-BF9M9M, RSSI: -62
[0d00h00m08s] 2025-04-27T02:05:27 <INF> [WIFI] Assigned IP: 192.168.178.183
[0d00h00m10s] 2025-04-27T02:05:29 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-04-27 02:05:29
[0d00h00m11s] 2025-04-27T02:05:30 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 101
[0d00h00m11s] 2025-04-27T02:05:30 <INF> [MAIN] SD card info: Name: SD16G, Capacity: 7618MB, Free: 7579MB
[0d00h00m14s] 2025-04-27T02:05:32 <INF> [MAIN] Initialization completed successfully
[0d00h00m16s] 2025-04-27T02:05:35 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m17s] 2025-04-27T02:05:35 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m17s] 2025-04-27T02:05:36 <INF> [LOGFILE] Set log level to ERRORExpected Behavior
No response
Screenshots
Additional Context
No response