Alignment error when recognizing the ROIs #3775
Description
The Problem
Hello,
Hello, There is an offset in the ROIs to the image during value recognition. This is not correctly aligned.
Please find attached a picture of my reference image, my Aligment Marker, and my ROI Configuration.
And the recognized value is the following:
Is this an error in my configuration or is the image being recognized incorrectly?
Version
Release: v16.0.0 (Commit: f542d84)
Logfile
[0d00h00m00s] 2025-05-29T13:25:41 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-05-29T13:25:41 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-05-29T13:25:41 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-05-29T13:25:41 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-05-29T13:25:41 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-05-29T13:25:41 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-05-29T13:25:41 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-05-29T13:25:44 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m03s] 2025-05-29T13:25:44 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m03s] 2025-05-29T13:25:44 <INF> [SNTP] Configuring NTP Client...
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [SNTP] Time is already set: 2025-05-29 15:25:44
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [WLANINI] SSID: SOMEVALUE
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [WLANINI] Hostname: watermeter-cold
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [WIFI] Set hostname to: watermeter-cold
[0d00h00m03s] 2025-05-29T15:25:44 <INF> [WIFI] Init successful
[0d00h00m06s] 2025-05-29T15:25:47 <INF> [WIFI] Connected to: SOMEVALUE, RSSI: -53
[0d00h00m07s] 2025-05-29T15:25:48 <INF> [WIFI] Assigned IP: 192.168.2.87
[0d00h00m08s] 2025-05-29T15:25:49 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-05-29 15:25:49
[0d00h00m09s] 2025-05-29T15:25:50 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m09s] 2025-05-29T15:25:50 <INF> [MAIN] SD card info: Name: APPSD, Capacity: 1920MB, Free: 1912MB
[0d00h00m11s] 2025-05-29T15:25:52 <INF> [MAIN] Initialization completed successfully
[0d00h00m14s] 2025-05-29T15:25:55 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m14s] 2025-05-29T15:25:55 <INF> [LOGFILE] Set log level to ERROR
[0d00h01m02s] 2025-05-29T15:26:43 <ERR> [POSTPROC] main: Raw: 10111.303, Value: , Status: Rate too high - Read: 10111.303 - Pre: 5874.000 - Rate: 4237.303
[0d00h06m02s] 2025-05-29T15:31:43 <ERR> [POSTPROC] main: Raw: 10111.303, Value: , Status: Rate too high - Read: 10111.303 - Pre: 5874.000 - Rate: 4237.303Expected Behavior
Read: 5874.000 or 5.874 and not 10111.303
Screenshots
No response
Additional Context
No response