Configuration not accessible after update from 15.7 to 16.0

[peterb-ART-h]

The Problem

Hallo, ich schreibe in Deutsch, da ich mich in meiner Muttersprache besser ausdrücken kann.

Nach dem OTA Update von der Version 15.7 auf die aktuelle Release 16.0 bekam ich Fehlermeldungen dass ein Kritische Fehler mit der Kamera (0x00000004) auftritt.

Wenn ich den ESP komplett ausschalte und nach ein paar Sekunden einschalte läuft das System scheinbar. Allerdings bekomme ich unter "Details" nicht zu sehen. Und auch auf die Konfigurationsseite kann ich nicht zugreifen (es wird nichts angezeigt).

Allerdings werden die Werte korrekt über MQTT an Home Assistant übertragen, wie vor dem Update.

Was kann man tun?

Danke,
peter

Version

16.0

Logfile

Reload Show Full Log Show Older Log Files

[7d15h32m02s] 2025-09-05T05:03:15 <ERR> [MQTT IF] Other event id:
[7d15h32m24s] 2025-09-05T05:03:38 <ERR> [MQTT IF] Other event id:
[7d15h32m47s] 2025-09-05T05:04:00 <ERR> [MQTT IF] Other event id:
[7d15h32m49s] 2025-09-05T05:04:02 <ERR> [WIFI] Disconnected, multiple reconnect attempts failed (202), still retrying...
[7d18h29m09s] 2025-09-05T08:00:23 <ERR> [MQTT IF] Other event id:
[0d00h00m00s] 2025-09-05T07:18:12 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:18:12 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-09-05T07:18:12 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:18:12 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-09-05T07:18:12 <INF> [MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2025-09-05T07:18:16 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2025-09-05T07:18:16 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2025-09-05T07:18:16 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2025-09-05T07:18:16 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2025-09-05T07:18:16 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2025-09-05T09:18:16 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2025-09-05T09:18:16 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m04s] 2025-09-05T09:18:16 <INF> [SNTP] Time is already set: 2025-09-05 09:18:16
[0d00h00m04s] 2025-09-05T09:18:16 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [WLANINI] SSID: CPA
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [WLANINI] Hostname: wasserzaehler
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [WIFI] Set hostname to: wasserzaehler
[0d00h00m05s] 2025-09-05T09:18:17 <INF> [WIFI] Init successful
[0d00h00m12s] 2025-09-05T09:18:24 <WRN> [WIFI] Disconnected (39)
[0d00h00m14s] 2025-09-05T09:18:26 <WRN> [WIFI] Disconnected (205)
[0d00h00m21s] 2025-09-05T09:18:33 <WRN> [WIFI] Disconnected (2, Auth fail)
[0d00h00m24s] 2025-09-05T09:18:36 <WRN> [WIFI] Disconnected (205)
[0d00h00m25s] 2025-09-05T09:18:37 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m25s] 2025-09-05T09:18:37 <INF> [MAIN] SD card info: Name: NCard, Capacity: 29818MB, Free: 14880MB
[0d00h00m27s] 2025-09-05T09:18:39 <INF> [MAIN] Initialization completed successfully
[0d00h00m28s] 2025-09-05T09:18:40 <INF> [WIFI] Connected to: CPA, RSSI: -85
[0d00h00m30s] 2025-09-05T09:18:42 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m00s] 2025-09-05T07:49:04 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:49:04 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-09-05T07:49:04 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:49:04 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-09-05T07:49:04 <INF> [MAIN] Total heap: 4380067 byte
[0d00h00m04s] 2025-09-05T07:49:08 <WRN> [MAIN] Camera init failed (0x105), retrying...
[0d00h00m08s] 2025-09-05T07:49:12 <ERR> [MAIN] Camera init failed (0x105)! Check camera module and/or proper electrical connection
[0d00h00m08s] 2025-09-05T07:49:12 <ERR> [HELPER] New System Status: 0x00000004
[0d00h00m08s] 2025-09-05T07:49:12 <INF> [SDCARD] Basic R/W check started...
[0d00h00m08s] 2025-09-05T07:49:12 <INF> [SDCARD] Basic R/W check successful
[0d00h00m08s] 2025-09-05T07:49:13 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m08s] 2025-09-05T07:49:13 <INF> [SNTP] Configuring NTP Client...
[0d00h00m08s] 2025-09-05T09:49:13 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m08s] 2025-09-05T09:49:13 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m08s] 2025-09-05T09:49:13 <INF> [SNTP] Time is already set: 2025-09-05 09:49:13
[0d00h00m08s] 2025-09-05T09:49:13 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m09s] 2025-09-05T09:49:13 <INF> [OTA] Start update process (/sdcard/firmware/AI-on-the-edge-device__update__v16.0.0.zip)
[0d00h00m09s] 2025-09-05T09:49:13 <INF> [OTA] File: /sdcard/firmware/AI-on-the-edge-device__update__v16.0.0.zip Filetype: ZIP
[0d00h00m09s] 2025-09-05T09:49:13 <INF> [OTA FILE] Files to be extracted: 100
[0d00h01m16s] 2025-09-05T09:50:20 <INF> [OTA] Files unzipped.
[0d00h01m16s] 2025-09-05T09:50:20 <INF> [OTA] Found firmware.bin
[0d00h01m32s] 2025-09-05T09:50:36 <INF> [OTA] Trigger reboot due to firmware update
[0d00h01m32s] 2025-09-05T09:50:36 <WRN> [OTA] Reboot in 5sec
[0d00h00m00s] 2025-09-05T07:50:43 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:50:43 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-09-05T07:50:43 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:50:43 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-09-05T07:50:44 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-09-05T07:50:44 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-09-05T07:50:44 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-09-05T07:50:46 <WRN> [MAIN] Camera init failed (0x105), retrying...
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [MAIN] Camera init failed (0x105)! Check camera module and/or proper electrical connection
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] New System Status: 0x00000004
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'Brightness = 0' to 'CamBrightness = 0'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'Contrast = 0' to 'CamContrast = 0'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'Saturation = 0' to 'CamSaturation = 0'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'Sharpness = 0' to 'CamSharpness = 0'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'ImageQuality = 12' to 'CamQuality = 12'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'ImageSize = VGA' to ';UNUSED_PARAMETER = VGA'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'Grayscale = false' to ';UNUSED_PARAMETER = false'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'Negative = false' to ';UNUSED_PARAMETER = false'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'Aec2 = false' to 'CamAec2 = false'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'AutoExposureLevel = 0' to 'CamAeLevel = 0'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'FixedExposure = false' to 'CamAec = false'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'InitialMirror = false' to ';UNUSED_PARAMETER = false'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [HELPER] Migrated Configfile line 'FlipImageSize = false' to ';UNUSED_PARAMETER = false'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [MAIN] Migrated Configfile line 'Zoom' to 'CamZoom'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [MAIN] Migrated Configfile line 'ZoomMode' to 'CamZoomSize'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [MAIN] Migrated Configfile line 'ZoomOffsetX' to 'CamZoomOffsetX'
[0d00h00m05s] 2025-09-05T07:50:49 <ERR> [MAIN] Migrated Configfile line 'ZoomOffsetY' to 'CamZoomOffsetY'
[0d00h00m05s] 2025-09-05T07:50:49 <INF> [MAIN] Config file migrated. Saved backup to /sdcard/config/config.bak
[0d00h00m06s] 2025-09-05T07:50:49 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m06s] 2025-09-05T07:50:49 <INF> [SNTP] Configuring NTP Client...
[0d00h00m06s] 2025-09-05T09:50:49 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m06s] 2025-09-05T09:50:49 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m06s] 2025-09-05T09:50:49 <INF> [SNTP] Time is already set: 2025-09-05 09:50:49
[0d00h00m06s] 2025-09-05T09:50:49 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m06s] 2025-09-05T09:50:49 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m06s] 2025-09-05T09:50:50 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m06s] 2025-09-05T09:50:50 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
[0d00h00m06s] 2025-09-05T09:50:50 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m06s] 2025-09-05T09:50:50 <INF> [WLANINI] SSID: CPA
[0d00h00m06s] 2025-09-05T09:50:50 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m06s] 2025-09-05T09:50:50 <INF> [WLANINI] Hostname: wasserzaehler
[0d00h00m06s] 2025-09-05T09:50:50 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m06s] 2025-09-05T09:50:50 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m06s] 2025-09-05T09:50:50 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m06s] 2025-09-05T09:50:50 <INF> [WIFI] Set hostname to: wasserzaehler
[0d00h00m06s] 2025-09-05T09:50:50 <INF> [WIFI] Init successful
[0d00h00m09s] 2025-09-05T09:50:53 <INF> [WIFI] Connected to: CPA, RSSI: -63
[0d00h00m10s] 2025-09-05T09:50:54 <INF> [WIFI] Assigned IP: 192.168.178.176
[0d00h00m27s] 2025-09-05T09:51:10 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m27s] 2025-09-05T09:51:10 <INF> [MAIN] SD card info: Name: NCard, Capacity: 29818MB, Free: 14875MB
[0d00h00m29s] 2025-09-05T09:51:12 <ERR> [MAIN] Initialization failed. Flow task start aborted. Loading reduced web interface...
[0d00h00m30s] 2025-09-05T09:51:14 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h00m39s] 2025-09-05T09:51:23 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-09-05 09:51:23
[0d00h00m47s] 2025-09-05T09:51:31 <INF> [OTA] !!! System will restart within 5 sec!!!
[0d00h00m47s] 2025-09-05T09:51:31 <INF> [OTA] Reboot triggered by Software (5s)
[0d00h00m47s] 2025-09-05T09:51:31 <WRN> [OTA] Reboot in 5sec
[0d00h00m00s] 2025-09-05T07:51:39 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:51:39 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-09-05T07:51:39 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:51:39 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-09-05T07:51:39 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-09-05T07:51:39 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-09-05T07:51:39 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-09-05T07:51:42 <WRN> [MAIN] Camera init failed (0x105), retrying...
[0d00h00m05s] 2025-09-05T07:51:44 <ERR> [MAIN] Camera init failed (0x105)! Check camera module and/or proper electrical connection
[0d00h00m05s] 2025-09-05T07:51:44 <ERR> [HELPER] New System Status: 0x00000004
[0d00h00m05s] 2025-09-05T07:51:44 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m05s] 2025-09-05T07:51:44 <INF> [SNTP] Configuring NTP Client...
[0d00h00m05s] 2025-09-05T09:51:44 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m05s] 2025-09-05T09:51:44 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m05s] 2025-09-05T09:51:44 <INF> [SNTP] Time is already set: 2025-09-05 09:51:44
[0d00h00m05s] 2025-09-05T09:51:44 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-09-05T09:51:44 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2025-09-05T09:51:44 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2025-09-05T09:51:44 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
[0d00h00m06s] 2025-09-05T09:51:45 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m06s] 2025-09-05T09:51:45 <INF> [WLANINI] SSID: CPA
[0d00h00m06s] 2025-09-05T09:51:45 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m06s] 2025-09-05T09:51:45 <INF> [WLANINI] Hostname: wasserzaehler
[0d00h00m06s] 2025-09-05T09:51:45 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m06s] 2025-09-05T09:51:45 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m06s] 2025-09-05T09:51:45 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m06s] 2025-09-05T09:51:45 <INF> [WIFI] Set hostname to: wasserzaehler
[0d00h00m06s] 2025-09-05T09:51:45 <INF> [WIFI] Init successful
[0d00h00m08s] 2025-09-05T09:51:47 <INF> [WIFI] Connected to: CPA, RSSI: -63
[0d00h00m09s] 2025-09-05T09:51:48 <INF> [WIFI] Assigned IP: 192.168.178.176
[0d00h00m26s] 2025-09-05T09:52:05 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m26s] 2025-09-05T09:52:05 <INF> [MAIN] SD card info: Name: NCard, Capacity: 29818MB, Free: 14875MB
[0d00h00m28s] 2025-09-05T09:52:07 <ERR> [MAIN] Initialization failed. Flow task start aborted. Loading reduced web interface...
[0d00h00m38s] 2025-09-05T09:52:17 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-09-05 09:52:17
[0d00h00m39s] 2025-09-05T09:52:18 <ERR> [FLOWCTRL] ClassFlowControll::GetJPGStream: alg_roi.jpg cannot be served -> alg.jpg is going to be served!
[0d00h01m37s] 2025-09-05T09:53:16 <ERR> [FLOWCTRL] ClassFlowControll::GetJPGStream: alg_roi.jpg cannot be served -> alg.jpg is going to be served!
[0d00h02m07s] 2025-09-05T09:53:46 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h02m08s] 2025-09-05T09:53:47 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h02m10s] 2025-09-05T09:53:49 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h03m05s] 2025-09-05T09:54:44 <INF> [OTA] !!! System will restart within 5 sec!!!
[0d00h03m05s] 2025-09-05T09:54:44 <INF> [OTA] Reboot triggered by Software (5s)
[0d00h03m05s] 2025-09-05T09:54:44 <WRN> [OTA] Reboot in 5sec
[0d00h00m00s] 2025-09-05T07:54:52 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:54:52 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-09-05T07:54:52 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:54:52 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-09-05T07:54:52 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-09-05T07:54:52 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-09-05T07:54:52 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-09-05T07:54:55 <WRN> [MAIN] Camera init failed (0x105), retrying...
[0d00h00m05s] 2025-09-05T07:54:57 <ERR> [MAIN] Camera init failed (0x105)! Check camera module and/or proper electrical connection
[0d00h00m05s] 2025-09-05T07:54:57 <ERR> [HELPER] New System Status: 0x00000004
[0d00h00m05s] 2025-09-05T07:54:57 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m05s] 2025-09-05T07:54:57 <INF> [SNTP] Configuring NTP Client...
[0d00h00m05s] 2025-09-05T09:54:57 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m05s] 2025-09-05T09:54:57 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m05s] 2025-09-05T09:54:57 <INF> [SNTP] Time is already set: 2025-09-05 09:54:57
[0d00h00m05s] 2025-09-05T09:54:57 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-09-05T09:54:57 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2025-09-05T09:54:57 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2025-09-05T09:54:58 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
[0d00h00m06s] 2025-09-05T09:54:58 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m06s] 2025-09-05T09:54:58 <INF> [WLANINI] SSID: CPA
[0d00h00m06s] 2025-09-05T09:54:58 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m06s] 2025-09-05T09:54:58 <INF> [WLANINI] Hostname: wasserzaehler
[0d00h00m06s] 2025-09-05T09:54:58 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m06s] 2025-09-05T09:54:58 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m06s] 2025-09-05T09:54:58 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m06s] 2025-09-05T09:54:58 <INF> [WIFI] Set hostname to: wasserzaehler
[0d00h00m06s] 2025-09-05T09:54:58 <INF> [WIFI] Init successful
[0d00h00m08s] 2025-09-05T09:55:01 <INF> [WIFI] Connected to: CPA, RSSI: -63
[0d00h00m09s] 2025-09-05T09:55:02 <INF> [WIFI] Assigned IP: 192.168.178.176
[0d00h00m10s] 2025-09-05T09:55:02 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-09-05 09:55:02
[0d00h00m10s] 2025-09-05T09:55:02 <INF> [MAIN] Device info: CPU cores: 2, Chip revision�����1[0d00h00m10s] 2025-09-05T09:55:02 <INF> [MAIN] SD card info: Name: NCard, Capacity: 29818MB, Free: 14875MB
[0d00h00m12s] 2025-09-05T09:55:04 <ERR> [MAIN] Initialization failed. Flow task start aborted. Loading reduced web interface...
[0d00h00m14s] 2025-09-05T09:55:06 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h00m41s] 2025-09-05T09:55:33 <INF> [OTA] !!! System will restart within 5 sec!!!
[0d00h00m41s] 2025-09-05T09:55:33 <INF> [OTA] Reboot triggered by Software (5s)
[0d00h00m41s] 2025-09-05T09:55:33 <WRN> [OTA] Reboot in 5sec
[0d00h00m00s] 2025-09-05T07:55:41 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:55:41 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-09-05T07:55:41 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T07:55:41 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-09-05T07:55:41 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-09-05T07:55:42 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-09-05T07:55:42 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-09-05T07:55:44 <WRN> [MAIN] Camera init failed (0x105), retrying...
[0d00h00m05s] 2025-09-05T07:55:46 <ERR> [MAIN] Camera init failed (0x105)! Check camera module and/or proper electrical connection
[0d00h00m05s] 2025-09-05T07:55:47 <ERR> [HELPER] New System Status: 0x00000004
[0d00h00m05s] 2025-09-05T07:55:47 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m05s] 2025-09-05T07:55:47 <INF> [SNTP] Configuring NTP Client...
[0d00h00m05s] 2025-09-05T09:55:47 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m05s] 2025-09-05T09:55:47 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m05s] 2025-09-05T09:55:47 <INF> [SNTP] Time is already set: 2025-09-05 09:55:47
[0d00h00m05s] 2025-09-05T09:55:47 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-09-05T09:55:47 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2025-09-05T09:55:47 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2025-09-05T09:55:47 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
[0d00h00m06s] 2025-09-05T09:55:47 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m06s] 2025-09-05T09:55:47 <INF> [WLANINI] SSID: CPA
[0d00h00m06s] 2025-09-05T09:55:47 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m06s] 2025-09-05T09:55:47 <INF> [WLANINI] Hostname: wasserzaehler
[0d00h00m06s] 2025-09-05T09:55:47 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m06s] 2025-09-05T09:55:47 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m06s] 2025-09-05T09:55:47 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m06s] 2025-09-05T09:55:48 <INF> [WIFI] Set hostname to: wasserzaehler
[0d00h00m06s] 2025-09-05T09:55:48 <INF> [WIFI] Init successful
[0d00h00m08s] 2025-09-05T09:55:50 <INF> [WIFI] Connected to: CPA, RSSI: -64
[0d00h00m09s] 2025-09-05T09:55:51 <INF> [WIFI] Assigned IP: 192.168.178.176
[0d00h00m10s] 2025-09-05T09:55:52 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-09-05 09:55:52
[0d00h00m12s] 2025-09-05T09:55:54 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m12s] 2025-09-05T09:55:54 <INF> [MAIN] SD card info: Name: NCard, Capacity: 29818MB, Free: 14875MB
[0d00h00m14s] 2025-09-05T09:55:56 <ERR> [MAIN] Initialization failed. Flow task start aborted. Loading reduced web interface...
[0d00h00m18s] 2025-09-05T09:56:00 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h01m01s] 2025-09-05T09:56:43 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h01m10s] 2025-09-05T09:56:51 <ERR> [FLOWCTRL] ClassFlowControll::GetJPGStream: alg_roi.jpg cannot be served -> alg.jpg is going to be served!
[0d00h01m37s] 2025-09-05T09:57:18 <INF> [CAM] Live stream started
[0d00h01m37s] 2025-09-05T09:57:18 <ERR> [CAM] CaptureToStream: Camera framebuffer not available
[0d00h01m37s] 2025-09-05T09:57:18 <INF> [CAM] Live stream stopped
[0d00h02m31s] 2025-09-05T09:58:13 <INF> [CAM] Live stream started
[0d00h02m31s] 2025-09-05T09:58:13 <ERR> [CAM] CaptureToStream: Camera framebuffer not available
[0d00h02m31s] 2025-09-05T09:58:13 <INF> [CAM] Live stream stopped
[0d00h02m39s] 2025-09-05T09:58:20 <ERR> [FLOWCTRL] ClassFlowControll::GetJPGStream: alg_roi.jpg cannot be served -> alg.jpg is going to be served!
[0d00h01m05s] 2025-09-05T10:00:43 <ERR> [POSTPROC] main: Raw: 4N4.787, Value: , Status: Rate too high - Read: 237.787 - Pre: 237.458 - Rate: 0.329
[0d00h04m19s] 2025-09-05T10:03:57 <ERR> [POSTPROC] main: Raw: 4N4.890, Value: , Status: Rate too high - Read: 237.890 - Pre: 237.458 - Rate: 0.432
[0d00h08m02s] 2025-09-05T10:07:39 <ERR> [POSTPROC] main: Raw: 4N7.788, Value: , Status: Rate too high - Read: 237.788 - Pre: 237.458 - Rate: 0.330
[0d00h13m01s] 2025-09-05T10:12:39 <ERR> [POSTPROC] main: Raw: 87N.887, Value: , Status: Rate too high - Read: 237.887 - Pre: 237.458 - Rate: 0.429
[0d00h18m02s] 2025-09-05T10:17:39 <ERR> [POSTPROC] main: Raw: 471.787, Value: , Status: Rate too high - Read: 237.787 - Pre: 237.458 - Rate: 0.329
[0d00h23m02s] 2025-09-05T10:22:39 <ERR> [POSTPROC] main: Raw: N77.789, Value: , Status: Rate too high - Read: 237.789 - Pre: 237.458 - Rate: 0.331
[0d00h00m00s] 2025-09-05T08:23:38 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T08:23:38 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-09-05T08:23:39 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T08:23:39 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-09-05T08:23:39 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-09-05T08:23:39 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-09-05T08:23:39 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-09-05T08:23:41 <WRN> [MAIN] Camera init failed (0x105), retrying...
[0d00h00m05s] 2025-09-05T08:23:44 <ERR> [MAIN] Camera init failed (0x105)! Check camera module and/or proper electrical connection
[0d00h00m05s] 2025-09-05T08:23:44 <ERR> [HELPER] New System Status: 0x00000004
[0d00h00m05s] 2025-09-05T08:23:44 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m05s] 2025-09-05T08:23:44 <INF> [SNTP] Configuring NTP Client...
[0d00h00m05s] 2025-09-05T10:23:44 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m05s] 2025-09-05T10:23:44 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m05s] 2025-09-05T10:23:44 <INF> [SNTP] Time is already set: 2025-09-05 10:23:44
[0d00h00m05s] 2025-09-05T10:23:44 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-09-05T10:23:44 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2025-09-05T10:23:44 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2025-09-05T10:23:44 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
[0d00h00m06s] 2025-09-05T10:23:44 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m06s] 2025-09-05T10:23:44 <INF> [WLANINI] SSID: CPA
[0d00h00m06s] 2025-09-05T10:23:44 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m06s] 2025-09-05T10:23:44 <INF> [WLANINI] Hostname: wasserzaehler
[0d00h00m06s] 2025-09-05T10:23:45 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m06s] 2025-09-05T10:23:45 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m06s] 2025-09-05T10:23:45 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m06s] 2025-09-05T10:23:45 <INF> [WIFI] Set hostname to: wasserzaehler
[0d00h00m06s] 2025-09-05T10:23:45 <INF> [WIFI] Init successful
[0d00h00m09s] 2025-09-05T10:23:47 <INF> [WIFI] Connected to: CPA, RSSI: -64
[0d00h00m10s] 2025-09-05T10:23:48 <INF> [WIFI] Assigned IP: 192.168.178.176
[0d00h00m11s] 2025-09-05T10:23:49 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-09-05 10:23:49
[0d00h00m12s] 2025-09-05T10:23:51 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m12s] 2025-09-05T10:23:51 <INF> [MAIN] SD card info: Name: NCard, Capacity: 29818MB, Free: 14875MB
[0d00h00m14s] 2025-09-05T10:23:53 <ERR> [MAIN] Initialization failed. Flow task start aborted. Loading reduced web interface...
[0d00h00m17s] 2025-09-05T10:23:56 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h00m52s] 2025-09-05T10:24:31 <INF> [OTA] !!! System will restart within 5 sec!!!
[0d00h00m52s] 2025-09-05T10:24:31 <INF> [OTA] Reboot triggered by Software (5s)
[0d00h00m52s] 2025-09-05T10:24:31 <WRN> [OTA] Reboot in 5sec
[0d00h00m00s] 2025-09-05T08:24:39 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T08:24:39 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-09-05T08:24:39 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T08:24:39 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-09-05T08:24:39 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-09-05T08:24:40 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-09-05T08:24:40 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-09-05T08:24:42 <WRN> [MAIN] Camera init failed (0x105), retrying...
[0d00h00m05s] 2025-09-05T08:24:44 <ERR> [MAIN] Camera init failed (0x105)! Check camera module and/or proper electrical connection
[0d00h00m05s] 2025-09-05T08:24:44 <ERR> [HELPER] New System Status: 0x00000004
[0d00h00m05s] 2025-09-05T08:24:45 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m05s] 2025-09-05T08:24:45 <INF> [SNTP] Configuring NTP Client...
[0d00h00m05s] 2025-09-05T10:24:45 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m05s] 2025-09-05T10:24:45 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m05s] 2025-09-05T10:24:45 <INF> [SNTP] Time is already set: 2025-09-05 10:24:45
[0d00h00m05s] 2025-09-05T10:24:45 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-09-05T10:24:45 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2025-09-05T10:24:45 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2025-09-05T10:24:45 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
[0d00h00m06s] 2025-09-05T10:24:45 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m06s] 2025-09-05T10:24:45 <INF> [WLANINI] SSID: CPA
[0d00h00m06s] 2025-09-05T10:24:45 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m06s] 2025-09-05T10:24:45 <INF> [WLANINI] Hostname: wasserzaehler
[0d00h00m06s] 2025-09-05T10:24:45 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m06s] 2025-09-05T10:24:45 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m06s] 2025-09-05T10:24:45 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m06s] 2025-09-05T10:24:46 <INF> [WIFI] Set hostname to: wasserzaehler
[0d00h00m06s] 2025-09-05T10:24:46 <INF> [WIFI] Init successful
[0d00h00m08s] 2025-09-05T10:24:48 <INF> [WIFI] Connected to: CPA, RSSI: -64
[0d00h00m09s] 2025-09-05T10:24:49 <INF> [WIFI] Assigned IP: 192.168.178.176
[0d00h00m10s] 2025-09-05T10:24:50 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-09-05 10:24:50
[0d00h00m12s] 2025-09-05T10:24:52 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m12s] 2025-09-05T10:24:52 <INF> [MAIN] SD card info: Name: NCard, Capacity: 29818MB, Free: 14875MB
[0d00h00m14s] 2025-09-05T10:24:54 <ERR> [MAIN] Initialization failed. Flow task start aborted. Loading reduced web interface...
[0d00h00m57s] 2025-09-05T10:25:37 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h01m04s] 2025-09-05T10:25:44 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h02m34s] 2025-09-05T10:27:13 <ERR> [CAM] SetQualityZoomSize, Failed to get Cam control structure
[0d00h02m38s] 2025-09-05T10:27:17 <ERR> [CAM] SetQualityZoomSize, Failed to get Cam control structure
[0d00h02m48s] 2025-09-05T10:27:28 <ERR> [CAM] SetQualityZoomSize, Failed to get Cam control structure
[0d00h03m16s] 2025-09-05T10:27:55 <ERR> [CAM] SetQualityZoomSize, Failed to get Cam control structure
[0d00h03m22s] 2025-09-05T10:28:01 <ERR> [CAM] SetQualityZoomSize, Failed to get Cam control structure
[0d00h00m00s] 2025-09-05T08:35:09 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T08:35:09 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-09-05T08:35:09 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T08:35:09 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-09-05T08:35:09 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-09-05T08:35:10 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-09-05T08:35:10 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-09-05T08:35:12 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m03s] 2025-09-05T08:35:12 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m03s] 2025-09-05T08:35:12 <INF> [SNTP] Configuring NTP Client...
[0d00h00m03s] 2025-09-05T10:35:12 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m03s] 2025-09-05T10:35:12 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m03s] 2025-09-05T10:35:12 <INF> [SNTP] Time is already set: 2025-09-05 10:35:12
[0d00h00m03s] 2025-09-05T10:35:12 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2025-09-05T10:35:12 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m03s] 2025-09-05T10:35:13 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m03s] 2025-09-05T10:35:13 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
[0d00h00m03s] 2025-09-05T10:35:13 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m04s] 2025-09-05T10:35:13 <INF> [WLANINI] SSID: CPA
[0d00h00m04s] 2025-09-05T10:35:13 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m04s] 2025-09-05T10:35:13 <INF> [WLANINI] Hostname: wasserzaehler
[0d00h00m04s] 2025-09-05T10:35:13 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m04s] 2025-09-05T10:35:13 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m04s] 2025-09-05T10:35:13 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m04s] 2025-09-05T10:35:13 <INF> [WIFI] Set hostname to: wasserzaehler
[0d00h00m04s] 2025-09-05T10:35:13 <INF> [WIFI] Init successful
[0d00h00m07s] 2025-09-05T10:35:17 <WRN> [WIFI] Disconnected (2, Auth fail)
[0d00h00m11s] 2025-09-05T10:35:20 <WRN> [WIFI] Disconnected (2, Auth fail)
[0d00h00m14s] 2025-09-05T10:35:24 <WRN> [WIFI] Disconnected (39)
[0d00h00m17s] 2025-09-05T10:35:26 <WRN> [WIFI] Disconnected (205)
[0d00h00m19s] 2025-09-05T10:35:29 <INF> [WIFI] Connected to: CPA, RSSI: -66
[0d00h00m20s] 2025-09-05T10:35:30 <INF> [WIFI] Assigned IP: 192.168.178.176
[0d00h00m24s] 2025-09-05T10:35:33 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m24s] 2025-09-05T10:35:33 <INF> [MAIN] SD card info: Name: NCard, Capacity: 29818MB, Free: 14875MB
[0d00h00m26s] 2025-09-05T10:35:35 <INF> [MAIN] Initialization completed successfully
[0d00h00m29s] 2025-09-05T10:35:38 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m29s] 2025-09-05T10:35:38 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m29s] 2025-09-05T10:35:38 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m00s] 2025-09-05T08:35:48 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T08:35:48 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-09-05T08:35:48 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T08:35:48 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-09-05T08:35:48 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-09-05T08:35:49 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-09-05T08:35:49 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-09-05T08:35:51 <WRN> [MAIN] Camera init failed (0x105), retrying...
[0d00h00m05s] 2025-09-05T08:35:53 <ERR> [MAIN] Camera init failed (0x105)! Check camera module and/or proper electrical connection
[0d00h00m05s] 2025-09-05T08:35:53 <ERR> [HELPER] New System Status: 0x00000004
[0d00h00m05s] 2025-09-05T08:35:53 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m05s] 2025-09-05T08:35:53 <INF> [SNTP] Configuring NTP Client...
[0d00h00m05s] 2025-09-05T10:35:53 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m05s] 2025-09-05T10:35:53 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m05s] 2025-09-05T10:35:54 <INF> [SNTP] Time is already set: 2025-09-05 10:35:54
[0d00h00m05s] 2025-09-05T10:35:54 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-09-05T10:35:54 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2025-09-05T10:35:54 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2025-09-05T10:35:54 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
[0d00h00m06s] 2025-09-05T10:35:54 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m06s] 2025-09-05T10:35:54 <INF> [WLANINI] SSID: CPA
[0d00h00m06s] 2025-09-05T10:35:54 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m06s] 2025-09-05T10:35:54 <INF> [WLANINI] Hostname: wasserzaehler
[0d00h00m06s] 2025-09-05T10:35:54 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m06s] 2025-09-05T10:35:54 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m06s] 2025-09-05T10:35:54 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m06s] 2025-09-05T10:35:54 <INF> [WIFI] Set hostname to: wasserzaehler
[0d00h00m06s] 2025-09-05T10:35:54 <INF> [WIFI] Init successful
[0d00h00m08s] 2025-09-05T10:35:57 <INF> [WIFI] Connected to: CPA, RSSI: -62
[0d00h00m09s] 2025-09-05T10:35:58 <INF> [WIFI] Assigned IP: 192.168.178.176
[0d00h00m11s] 2025-09-05T10:36:00 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-09-05 10:36:00
[0d00h00m12s] 2025-09-05T10:36:00 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m12s] 2025-09-05T10:36:00 <INF> [MAIN] SD card info: Name: NCard, Capacity: 29818MB, Free: 14875MB
[0d00h00m14s] 2025-09-05T10:36:02 <ERR> [MAIN] Initialization failed. Flow task start aborted. Loading reduced web interface...
[0d00h00m15s] 2025-09-05T10:36:03 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h00m31s] 2025-09-05T10:36:19 <INF> [CAM] Live stream started
[0d00h00m31s] 2025-09-05T10:36:19 <ERR> [CAM] CaptureToStream: Camera framebuffer not available
[0d00h00m31s] 2025-09-05T10:36:19 <INF> [CAM] Live stream stopped
[0d00h01m37s] 2025-09-05T10:37:25 <WRN> [MAINCTRL] Flow start triggered by REST API, but flow is not active!
[0d00h02m45s] 2025-09-05T10:38:34 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h04m04s] 2025-09-05T10:39:53 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h04m09s] 2025-09-05T10:39:57 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h04m45s] 2025-09-05T10:40:33 <INF> [OTA] !!! System will restart within 5 sec!!!
[0d00h04m45s] 2025-09-05T10:40:33 <INF> [OTA] Reboot triggered by Software (5s)
[0d00h04m45s] 2025-09-05T10:40:33 <WRN> [OTA] Reboot in 5sec
[0d00h00m00s] 2025-09-05T08:40:41 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T08:40:41 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-09-05T08:40:42 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-09-05T08:40:42 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-09-05T08:40:42 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-09-05T08:40:42 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-09-05T08:40:42 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-09-05T08:40:44 <WRN> [MAIN] Camera init failed (0x105), retrying...
[0d00h00m05s] 2025-09-05T08:40:47 <ERR> [MAIN] Camera init failed (0x105)! Check camera module and/or proper electrical connection
[0d00h00m05s] 2025-09-05T08:40:47 <ERR> [HELPER] New System Status: 0x00000004
[0d00h00m05s] 2025-09-05T08:40:47 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m05s] 2025-09-05T08:40:47 <INF> [SNTP] Configuring NTP Client...
[0d00h00m05s] 2025-09-05T10:40:47 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m05s] 2025-09-05T10:40:47 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m05s] 2025-09-05T10:40:47 <INF> [SNTP] Time is already set: 2025-09-05 10:40:47
[0d00h00m05s] 2025-09-05T10:40:47 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-09-05T10:40:47 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2025-09-05T10:40:47 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2025-09-05T10:40:47 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
[0d00h00m06s] 2025-09-05T10:40:47 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m06s] 2025-09-05T10:40:47 <INF> [WLANINI] SSID: CPA
[0d00h00m06s] 2025-09-05T10:40:47 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m06s] 2025-09-05T10:40:47 <INF> [WLANINI] Hostname: wasserzaehler
[0d00h00m06s] 2025-09-05T10:40:47 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m06s] 2025-09-05T10:40:48 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m06s] 2025-09-05T10:40:48 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m06s] 2025-09-05T10:40:48 <INF> [WIFI] Set hostname to: wasserzaehler
[0d00h00m06s] 2025-09-05T10:40:48 <INF> [WIFI] Init successful
[0d00h00m08s] 2025-09-05T10:40:50 <INF> [WIFI] Connected to: CPA, RSSI: -63
[0d00h00m09s] 2025-09-05T10:40:51 <INF> [WIFI] Assigned IP: 192.168.178.176
[0d00h00m11s] 2025-09-05T10:40:53 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-09-05 10:40:53
[0d00h00m12s] 2025-09-05T10:40:54 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m12s] 2025-09-05T10:40:54 <INF> [MAIN] SD card info: Name: NCard, Capacity: 29818MB, Free: 14875MB
[0d00h00m14s] 2025-09-05T10:40:56 <ERR> [MAIN] Initialization failed. Flow task start aborted. Loading reduced web interface...
[0d00h00m17s] 2025-09-05T10:40:58 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h00m33s] 2025-09-05T10:41:15 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h00m39s] 2025-09-05T10:41:21 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h01m27s] 2025-09-05T10:42:09 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h01m29s] 2025-09-05T10:42:11 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h01m31s] 2025-09-05T10:42:13 <ERR> [MAIN SERVER] We have a critical error, not serving main page!
[0d00h00m11s] 2025-09-05T10:45:56 <INF> [SNTP] =================================================
[0d00h00m11s] 2025-09-05T10:45:56 <INF> [SNTP] ==================== Start ======================
[0d00h00m11s] 2025-09-05T10:45:56 <INF> [SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m11s] 2025-09-05T10:45:56 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-09-05 10:45:56
[0d00h00m12s] 2025-09-05T10:45:58 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m12s] 2025-09-05T10:45:58 <INF> [MAIN] SD card info: Name: NCard, Capacity: 29818MB, Free: 14875MB
[0d00h00m14s] 2025-09-05T10:46:00 <INF> [MAIN] Initialization completed successfully
[0d00h00m16s] 2025-09-05T10:46:02 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m17s] 2025-09-05T10:46:02 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m17s] 2025-09-05T10:46:03 <INF> [LOGFILE] Set log level to ERROR

Expected Behavior

No response

Screenshots

No response

Additional Context

Overview ist leer:

Konfiguration ist komplett leer:

[SybexX]

Du mußt den browser cache und cookies löschen (da an den html Dateien viele Änderungen gemacht wurden, müssen sie neu von der SD gelesen/geladen werden. Um den ESP32 zu entlasten, werden die html Seiten im browser cache 24 Stunden lang gespeichert und müssen dadurch nicht ständig von der SD geladen werden).

[peterb-ART-h]

Hallo SyBexX,Danke für die schnelle Antwort.Habe den Cache komplett geleert. Hat allerdings überhaupt nichts geändert. Ich sehe z.B. unter Recognition die aktuellen Werte. Aber unter Overview oder Configuration kommt nichts.Grüße,PeterVon: SybexXx ***@***.***>Datum: Freitag, 5. September 2025 um 14:00An: jomjol/AI-on-the-edge-device ***@***.***>Cc: peterb-ART-h ***@***.***>, Author ***@***.***>Betreff: Re: [jomjol/AI-on-the-edge-device] Configuration not accessible after update from 15.7 to 16.0 (Issue #3911)SybexX left a comment (jomjol/AI-on-the-edge-device#3911)Du mußt den browser cache löschen, da an den html Dateien viele Änderungen gemacht wurden.—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.

[SybexX]

Hast du beim Update die ganze update zip ausgewählt oder nur die firmware.bin?

[peterb-ART-h]

Die komplette Update ZIP (AI-on-the-edge-device__update__v16.0.0.zip).Von: SybexXx ***@***.***>Datum: Freitag, 5. September 2025 um 14:12An: jomjol/AI-on-the-edge-device ***@***.***>Cc: peterb-ART-h ***@***.***>, Author ***@***.***>Betreff: Re: [jomjol/AI-on-the-edge-device] Configuration not accessible after update from 15.7 to 16.0 (Issue #3911)SybexX left a comment (jomjol/AI-on-the-edge-device#3911)Hast du beim Update die ganze update zip ausgewählt oder nur die firmware.bin?—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.

[peterb-ART-h]

Kann man das OTA nochmal irgendwie ein zweites Mal starten?Aktuell ist die Schaltfläche ausgebaut, wenn ich das File lade.Von: SybexXx ***@***.***>Datum: Freitag, 5. September 2025 um 14:12An: jomjol/AI-on-the-edge-device ***@***.***>Cc: peterb-ART-h ***@***.***>, Author ***@***.***>Betreff: Re: [jomjol/AI-on-the-edge-device] Configuration not accessible after update from 15.7 to 16.0 (Issue #3911)SybexX left a comment (jomjol/AI-on-the-edge-device#3911)Hast du beim Update die ganze update zip ausgewählt oder nur die firmware.bin?—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.

[SybexX]

Eventuell wurden die neuen html dateien nicht richtig oder garnicht auf deine SD Karte geschrieben, einfach mal das Update neu durchführen. Die Recognition Seite wird immer vom ESP32 geladen und befindet sich nicht auf der SD und wird auch nicht in den browser cache gespeichert. Wenn ein erneutes Update nicht funktioniert, bleibt dir leider nichts Anderes übrig, als die Dateien manuell am PC auf die SD Karte zu kopieren.

[peterb-ART-h]

Leider bleibt die Schaltfläche „Update And Install“ grau…:Von: SybexXx ***@***.***>Datum: Freitag, 5. September 2025 um 14:29An: jomjol/AI-on-the-edge-device ***@***.***>Cc: peterb-ART-h ***@***.***>, Author ***@***.***>Betreff: Re: [jomjol/AI-on-the-edge-device] Configuration not accessible after update from 15.7 to 16.0 (Issue #3911)SybexX left a comment (jomjol/AI-on-the-edge-device#3911)Eventuell wurden die neuen html dateien nicht richtig oder garnicht auf deine SD Karte geschrieben, einfach mal das Update neu durchführen. Die Recognition Seite wird immer vom ESP32 geladen und befindet sich nicht auf der SD und wird auch nicht in den browser cache gespeichert. Wenn ein erneutes Update nicht funktioniert, bleibt dir leider nichts Anderes übrig, als die Dateien manuell am PC auf die SD Karte zu kopieren.—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.

[SybexX]

Der file-server sollte auch funktionieren, darüber kannst du die ota_page.html von der SD löschen und die neue hochladen + md5.min.js und das Update nochmal durchführen.

[peterb-ART-h]

Vielen Dank soweit. Aber ich bin leider kein Experte mit dem ESP bzw. AI on the edge.Welchen file-server bzw. wie starte ich diesen? Oder ganz allgemein, komme ich über die IP irgendwie auf den ESP und die Dateistruktur?Von: SybexXx ***@***.***>Datum: Freitag, 5. September 2025 um 14:37An: jomjol/AI-on-the-edge-device ***@***.***>Cc: peterb-ART-h ***@***.***>, Author ***@***.***>Betreff: Re: [jomjol/AI-on-the-edge-device] Configuration not accessible after update from 15.7 to 16.0 (Issue #3911)SybexX left a comment (jomjol/AI-on-the-edge-device#3911)Der file-server sollte auch funktionieren, darüber kannst du die ota_page.html von der SD löschen und die neue hochladen + md5.min.js und das Update nochmal durchführen.—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.

[SybexX]

oder http://IP_vom_ESP32/fileserver/html/

[peterb-ART-h]

Also ich finde die Datei ota_page.html nur im directory „html“. Dort ist diese als „ota_page.html“ und als „._ota_page.html": Bevor ich diese lösche noch eine Frage. Im ZIP file ist dann unter „html“ eine „ota_page.html.gz“. Ich nehme an diese muss ich dann rüber kopieren?Und die „md5.min.js“ ist auch auf in dem ZIP. Auch diese entpacken und rüber kopieren? und wie führe ich diese aus?Sorry dass ich nerve...PeterVon: SybexXx ***@***.***>Datum: Freitag, 5. September 2025 um 15:05An: jomjol/AI-on-the-edge-device ***@***.***>Cc: peterb-ART-h ***@***.***>, Author ***@***.***>Betreff: Re: [jomjol/AI-on-the-edge-device] Configuration not accessible after update from 15.7 to 16.0 (Issue #3911)SybexX left a comment (jomjol/AI-on-the-edge-device#3911)Unbenannt.png (view on web) —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.

[SybexX]

Wir haben die Dateien in .gz geändert, da die gepackten dateien kleiner sind und dadurch auch viel schneller geladen werden (schnellerer Seitenaufbau). Wenn du die OTA-Seite über die Adresseingabe(http://IP_vom_ESP32/ota_page.html) aufrufen willst, mußt du die normale html(.gz entpacken) hochladen, wenn du es über das normale Menue aufrufst, dann die .gz Dateien hochladen.

alte Datei löschen:

neue Datei hochladen:

Eigentlich reicht es auch aus, wenn du nur die .gz Dateien hochlädst, da sie Vorrang vor den normalen html Dateien haben.

[leszegfu]

I just upgraded my watermeter esp32 device with the latest version and hit the same issue. I believe the problem is with the camera not being recognized any more. I see you have the follow error in the logs and that's the same error i got. The camera was working fine for me just before the upgrade.

https://jomjol.github.io/AI-on-the-edge-device-docs/Error-Codes/
Camera init failed (0x105), retrying... [0d00h00m05s] 2025-09-05T08:40:47 <ERR> [MAIN] Camera init failed (0x105)! Check camera module and/or proper electrical connection [0d00h00m05s] 2025-09-05T08:40:47 <ERR> [HELPER] New System Status: 0x00000004

[SybexX]

You have to separate the ESP32 from the power supply (hard reset). Sometimes it happens that the camera hangs up during the update and has to be reset.