Value wird nicht aktualisiert #3942
Description
The Problem
Hi,
ich habe die aktuelle Version installiert. Ich wundere mich in den letzten Tagen warum Home Assistant keinen Gas Verbraucht trackt und dann habe ich gesehen, dass der "Value" nicht aktualisiert wird, ob wohl die Werte richtig als RAW erfasst werden.
Siehe Bild: https://imgur.com/a/yJ61Zon
Woran kann das liegen?
Ich habe jetzt auch verschiedene Digit ROI Processing Models durchprobiert.
Version
Release: v16.0.0
Logfile
[0d00h00m15s] 2025-10-18T10:59:19 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m00s] 2025-10-18T09:01:12 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-10-18T09:01:12 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-10-18T09:01:12 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-10-18T09:01:12 <INF> [SDCARD] Basic R/W check started...
[0d00h00m00s] 2025-10-18T09:01:12 <INF> [SDCARD] Basic R/W check successful
[0d00h00m00s] 2025-10-18T09:01:13 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-10-18T09:01:13 <INF> [MAIN] Total heap: 4378411 byte
[0d00h00m03s] 2025-10-18T09:01:15 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m03s] 2025-10-18T09:01:15 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m03s] 2025-10-18T09:01:15 <INF> [SNTP] Configuring NTP Client...
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [SNTP] Time is already set: 2025-10-18 11:01:15
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [MAIN] Tag: 'v16.0.0', Release: v16.0.0 (Commit: f542d84), Date/Time: 2025-03-15 13:28, Web UI: Release: v16.0.0 (Commit: f542d84)
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [WLANINI] SSID: datwlan-2.4G
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [WLANINI] Hostname: gasmeter
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [WLANINI] RSSIThreshold: 0
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [WIFI] Set hostname to: gasmeter
[0d00h00m03s] 2025-10-18T11:01:15 <INF> [WIFI] Init successful
[0d00h00m06s] 2025-10-18T11:01:18 <INF> [WIFI] Connected to: datwlan-2.4G, RSSI: -58
[0d00h00m07s] 2025-10-18T11:01:19 <INF> [WIFI] Assigned IP: 192.168.188.135
[0d00h00m23s] 2025-10-18T11:01:35 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 300
[0d00h00m23s] 2025-10-18T11:01:35 <INF> [MAIN] SD card info: Name: CBADS, Capacity: 7681MB, Free: 7627MB
[0d00h00m25s] 2025-10-18T11:01:37 <INF> [MAIN] Initialization completed successfully
[0d00h00m29s] 2025-10-18T11:01:41 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m29s] 2025-10-18T11:01:41 <INF> [LOGFILE] Set log level to ERRORExpected Behavior
No response
Screenshots
No response
Additional Context
No response