Update Adaptive_Meshing.cfg

Dockable probe config calls somehow hot missed when merging, adding now. Sorry yall!

Author: kyleisah

Configuration/Adaptive_Meshing.cfg

@@ -14,6 +14,9 @@ gcode:
     {% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}                                                          # Get bed mesh max from printer.cfg
     {% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}                                                        # Get probe count from printer.cfg
     {% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}                                           # Pull verbose setting from _KAMP_Settings
+    {% set probe_dock_enable = printer["gcode_macro _KAMP_Settings"].probe_dock_enable | abs %}                                     # Pull probe dockable probe settings from _KAMP_Settings
+    {% set attach_macro = printer["gcode_macro _KAMP_Settings"].attach_macro | string %}                                            # Pull attach probe command from _KAMP_Settings
+    {% set detach_macro = printer["gcode_macro _KAMP_Settings"].detach_macro | string %}                                            # Pull detach probe command from _KAMP_Settings
     {% set mesh_margin = printer["gcode_macro _KAMP_Settings"].mesh_margin | float %}                                               # Pull mesh margin setting from _KAMP_Settings
     {% set fuzz_amount = printer["gcode_macro _KAMP_Settings"].fuzz_amount | float %}                                               # Pull fuzz amount setting from _KAMP_Settings
     {% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}                                             # If probe count is only a single number, convert it to 2. E.g. probe_count:7 = 7,7