error message

[jonhp]

1 - don't know what the error message is trying to tell me.
2 - note 1: "chance" should be "changed".

[lachlanA]

KiCad dose not like reference's with out numbers, where as Eagle will allow reference's with out numbers.
for example, R and R1 are both valid in Eagle, but in KiCad only R1 is valid so the script renumbers
the parts, that's what it's telling you about, most case's it should be ok, But if your using R in your BOM
parts list, the numbers wont match what you had in Eagle, which will make for problems building the boards
if you were expecting exactly the same numbers, as Eagle.

Lachlan