Skip to content

ECC Error detected #574

Open
Open
@pompushko

Description

@pompushko

I'm not sure, if that is hardware issue or nope. I hope that is not a hardware issue :D

In some cases, reboot helps, in some cases ifconfig can0 down and ifconfig can0 up
Also, unfortunately, thats happens only with mcp251xfd which is connected to spi1-0

# CAN-bus shield
dtoverlay=spi1-3cs
dtoverlay=mcp251xfd,spi0-0,interrupt=25
dtoverlay=mcp251xfd,spi0-1,interrupt=13
dtoverlay=mcp251xfd,spi1-0,interrupt=24
filename:       /lib/modules/6.6.62+rpt-rpi-v7/kernel/net/can/can.ko.xz
alias:          net-pf-29
author:         Urs Thuermann <[email protected]>, Oliver Hartkopp <[email protected]>
license:        Dual BSD/GPL
description:    Controller Area Network PF_CAN core
srcversion:     9FCDE9DC80F2506E3093972
depends:
intree:         Y
name:           can
vermagic:       6.6.62+rpt-rpi-v7 SMP mod_unload modversions ARMv7 p2v8
parm:           stats_timer:enable timer for statistics (default:on) (int)
Linux device 6.6.62+rpt-rpi-v7 #1 SMP Raspbian 1:6.6.62-1+rpt1 (2024-11-25) armv7l GNU/Linux
[  276.067936] mcp251xfd spi1.0 can-c1: Double ECC Error detected at address 0x0470.
[  287.749071] mcp251xfd spi1.0 can-c1: Single ECC Error detected at address 0x0470.
[  293.302682] mcp251xfd spi1.0 can-c1: Single ECC Error detected at address 0x047c.
[  299.193674] mcp251xfd spi1.0 can-c1: Single ECC Error detected at address 0x0534.
[  316.325433] mcp251xfd spi1.0 can-c1: Single ECC Error detected at address 0x0564.

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Type

    No type

    Projects

    No projects

    Milestone

    No milestone

    Relationships

    None yet

    Development

    No branches or pull requests

    Issue actions