example.yaml

uart:
  tx_pin: GPIO1
  rx_pin: GPIO3
  baud_rate: 19200
  debug:
    direction: BOTH
    dummy_receiver: false
    after:
      delimiter: "\n"
    sequence:
      - lambda: UARTDebug::log_hex(direction, bytes, ':');

external_components:
  - source:
      type: git
      url: https://github.com/lipov3cz3k/esphome-bspool-chlorinator
    components: [ bs_pool ]

bs_pool:
  update_interval: 5s

sensor:
  - platform: bs_pool
    cell_current:
      name: Cell current
    cell_intensity:
      name: Cell intensity
    cell_voltage:
      name: Cell voltage
    ph:
      name: pH
    salt_concentration:
      name: Salt concentration
    radox:
      name: ORP
    temperature:
      name: Temperature

text_sensor:
  - platform: bs_pool
    time:
      name: Device Time
    version:
      name: Device firmware version

binary_sensor:
  - platform: bs_pool
    alarm_redox_saturated:
      name: ORP probe saturated alarm
    alarm_overtemperature:
      name: Overtemperature inside the chlorinator
    alarm_open_circuit:
      name: Open circuit alarm
    alarm_water_flow:
      name: Lack of water flow alarm
    alarm_short_circuit:
      name: Short circuit alarm
    alarm_unit_stopped:
      name: P954 unit stopped alarm
    alarm_communication_error:
      name: Communication error to P954 alarm
    warning_low_salt:
      name: Too few salt
    warning_high_salt:
      name: Too much salt
    warning_ph_pump_overrun:
      name: pH problem, pump has run for too long
    warning_acid:
      name: Acid warning
    warning_clock_set:
      name: Clock has been set
    warning_probe_disconnected:
      name: ORP or chlorine probe disconnected
    status_output_voltage_polarity:
      name: Folarity of output voltage
    status_filter_pump_running:
      name: Filter pump running
    status_chlorination_process:
      name: Chlorination in process
    status_stopped_by_remote:
      name: Stopped by remote controller
    status_orp_sensor_stable:
      name: ORP sensor reading is stable
    status_salt_sensor_connected:
      name: Salt sensor connected
    status_electrode_cleaning:
      name: Electrode cleaning in process
    status_super_chlorination:
      name: Super-chlorination in process

select:
  - platform: bs_pool
    control_mode:
      name: Control mode

switch:
  - platform: bs_pool
    user_is_outdoor:
      name: Pool is outdoor
    user_cover_switch_off:
      name: Cover switch off
    user_flow_switch_installed:
      name: Flow switch installed
    user_orp_displayed:
      name: ORP displayed
    user_ph_alarm:
      name: pH alarm
    user_ph_corrector_alkaline:
      name: pH corrector alkaline
    user_ph_control:
      name: pH control
    user_cover_installed:
      name: Cover installed