nable to Access Logdy Web UI when Setting ui-ip in config.json

[miloit]

Hi everyone,

I’m currently setting up Logdy and ran into an issue when trying to bind the web UI to a specific IP address using the ui-ip configuration in the config.json file. Despite having configured it, I’m unable to access the web interface.

Here’s what I’ve done so far:

I’ve set the ui-ip parameter in config.json to my local network IP, for example:
json
Kopieren
Bearbeiten
"ui-ip": "192.168.1.100"
The other settings in the server section are as follows:
json
Kopieren
Bearbeiten
"server": {
"host": "localhost",
"port": 8080,
"bind": "0.0.0.0",
"ui-ip": "192.168.1.100",
"https": false
}
Issue:

After making these changes, I’m unable to access the Logdy web interface from the browser at http://192.168.1.100:8080 or even http://localhost:8080 (from the server itself).
The web UI works fine when I remove or comment out the ui-ip setting, allowing access via localhost.
What I’ve tried:

Restarting the Logdy server after each configuration change.
Verifying that the server is listening on the correct IP by running netstat/lsof commands.
Ensuring no firewall rules block access to port 8080.

[PeterOsinski]

Can you paste the command and the output you are executing? Similar to the one I used below