JC4827W543R OK in Arduino_GFX/QSPI, how to port to Lovyan? #604
Replies: 4 comments 5 replies
-
hi, LovyanGFX does not support QSPI for ESP32 yet, you can still try this PR if you feel experimental though :-) Using the QSPI implementation from that PR, your config file should look like this [edit1] updated the link to PR |
Beta Was this translation helpful? Give feedback.
-
your QSPI display is a NV3041A, not a SH8601Z. the reason what is needed now is the creation of a solving the E (11173) spi_master: spi_master_init_driver(236): invalid core id bus error (display task is running on the wrong core): either change the core affinity setting, or attach the display task to the other core, also make sure all tasks using SPI are on the same core. I have produced the skeleton of a #include <LovyanGFX.hpp>
#include <lgfx_user/LGFX_JC4827W543_4.3inch_ESP32S3.hpp>
LGFX tft;
void setup()
{
tft.init();
}
void loop()
{
tft.clear();
tft.println("Hello World!");
delay(1000);
} |
Beta Was this translation helpful? Give feedback.
-
Hello Friends |
Beta Was this translation helpful? Give feedback.
-
closing this as implemented @Westcott1 bugs in panel support (e.g. rgb order) will be handled in your other issue |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
I've just got a JC4827W543C 4.3" 480x272 "cheap black display" (CBD).
https://github.com/profi-max/JC4827W543_4.3inch_ESP32S3_board
It's working OK with Arduino_GFX, config below.
Can this translate to LovyanGFX?
Beta Was this translation helpful? Give feedback.
All reactions