README.md

Memory Model

The memory model UVC models a memory device which any host interface can read from or write to. It is implemented as a uvm_object, and instantiates an associative array of bytes system_memory. This class is parameterized by both the address width and the data width, and creates two typedefs to represent both, mem_addr_t and mem_data_t. The mem_model class has four main functions, which are detailed below.

read_byte(mem_addr_t addr)

This function looks up the byte of data corresponding to the memory address passed in, and returns it. If the address does not exist in system_memory, it will randomize the returned data and throw a UVM_ERROR.

write_byte(mem_addr_t addr, bit [7:0] data)

This function simply assigns the given data to the specified memory address location in system_memory.

write(input mem_addr_t addr, mem_data_t data)

This function writes a full memory word of width mem_data_t to the specified address, breaking it down into a series of back-to-back calls to write_byte() to correctly byte-address the memory.

read(mem_addr_t addr)

This function reads a full memory word of width mem_data_t from the specified address, breaking it down into a series of back-to-back calls to read_byte() to correctly byte-address the memory.