Need help in creating stack SLC and geometry information using the miaplpy and the ISCE #78
Replies: 5 comments
-
Hi Desmond, |
Beta Was this translation helpful? Give feedback.
-
Thank you very much but the installation of this two has been my problem
Sent from my T-Mobile 5G Device
Get Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: Andreas Piter ***@***.***>
Sent: Thursday, December 19, 2024 11:31:35 AM
To: luhipi/sarvey ***@***.***>
Cc: Desmond Kangah ***@***.***>; Author ***@***.***>
Subject: Re: [luhipi/sarvey] Need help in creating stack SLC and geometry information using the miaplpy and the ISCE (Issue #28)
Hi Desmond,
Thanks for your interest in SARvey. I am happy to hear that you succesfully run the sample dataset.
To create your own dataset, please follow the instructions<https://github.com/isce-framework/isce2/blob/main/contrib/stack/README.md> for creating an SLC stack with ISCE<https://github.com/isce-framework/isce2>. Once your coregistered SLC stack is ready, you can load the data into the format specific to Miaplpy<https://github.com/insarlab/MiaplPy> which is described here<https://luhipi.github.io/sarvey/docs/preparation.html#loading-data-into-miaplpy>.
Best, Andreas
—
Reply to this email directly, view it on GitHub<#28 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BDXWNZ4IE4LDAS2FFZV6VR32GL7HPAVCNFSM6AAAAABT4FGTIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNJVGI4DQNJTGM>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Good day brother, please with the results of ISCE to used by the miaplpy, can SNAP produce that ?
…________________________________
From: Andreas Piter ***@***.***>
Sent: Thursday, December 19, 2024 11:31 AM
To: luhipi/sarvey ***@***.***>
Cc: Desmond Kangah ***@***.***>; Author ***@***.***>
Subject: Re: [luhipi/sarvey] Need help in creating stack SLC and geometry information using the miaplpy and the ISCE (Issue #28)
Hi Desmond,
Thanks for your interest in SARvey. I am happy to hear that you succesfully run the sample dataset.
To create your own dataset, please follow the instructions<https://github.com/isce-framework/isce2/blob/main/contrib/stack/README.md> for creating an SLC stack with ISCE<https://github.com/isce-framework/isce2>. Once your coregistered SLC stack is ready, you can load the data into the format specific to Miaplpy<https://github.com/insarlab/MiaplPy> which is described here<https://luhipi.github.io/sarvey/docs/preparation.html#loading-data-into-miaplpy>.
Best, Andreas
—
Reply to this email directly, view it on GitHub<#28 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BDXWNZ4IE4LDAS2FFZV6VR32GL7HPAVCNFSM6AAAAABT4FGTIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNJVGI4DQNJTGM>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Dear @kangahdesmond, SARvey relies on the preprocessors supported by MiaplPy. Currently, only ISCE and GAMMA are supported. We are still looking for someone who is familiar enough with SNAP to provide the support for SNAP inside MiaplPy. |
Beta Was this translation helpful? Give feedback.
-
Thanks
Sent from my T-Mobile 5G Device
Get Outlook for Android<https://aka.ms/AAb9ysg>
…________________________________
From: Andreas Piter ***@***.***>
Sent: Wednesday, January 8, 2025 9:37:28 AM
To: luhipi/sarvey ***@***.***>
Cc: Desmond Kangah ***@***.***>; Mention ***@***.***>
Subject: Re: [luhipi/sarvey] Need help in creating stack SLC and geometry information using the miaplpy and the ISCE (Issue #28)
Dear @kangahdesmond<https://github.com/kangahdesmond>, SARvey relies on the preprocessors supported by MiaplPy. Currently, only ISCE and GAMMA are supported. We are still looking for someone who is familiar enough with SNAP to provide the support for SNAP inside MiaplPy.
Best, Andreas
—
Reply to this email directly, view it on GitHub<#28 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BDXWNZ24BPOVCOTMXPCTZ3D2JVA3RAVCNFSM6AAAAABT4FGTIOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNZXHE3TSOJYGI>.
You are receiving this because you were mentioned.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
I have been able to install the SARvey and run the sample data and everything works perfectly but am left with how to to do the preparation to get the two files to be used by SARvey, PLease i need help.
Beta Was this translation helpful? Give feedback.
All reactions