Skip to content

Latest commit

 

History

History
432 lines (314 loc) · 16.4 KB

CONTRIBUTING.md

File metadata and controls

432 lines (314 loc) · 16.4 KB
Raw

Contributing to rclone

This is a short guide on how to contribute things to rclone.

Reporting a bug

If you've just got a question or aren't sure if you've found a bug then please use the rclone forum instead of filing an issue.

When filing an issue, please include the following information if possible as well as a description of the problem. Make sure you test with the latest beta of rclone:

  • Rclone version (eg output from rclone -V)
  • Which OS you are using and how many bits (eg Windows 7, 64 bit)
  • The command you were trying to run (eg rclone copy /tmp remote:tmp)
  • A log of the command with the -vv flag (eg output from rclone -vv copy /tmp remote:tmp)
    • if the log contains secrets then edit the file with a text editor first to obscure them

Submitting a pull request

If you find a bug that you'd like to fix, or a new feature that you'd like to implement then please submit a pull request via GitHub.

If it is a big feature then make an issue first so it can be discussed.

You'll need a Go environment set up with GOPATH set. See the Go getting started docs for more info.

First in your web browser press the fork button on rclone's GitHub page.

Now in your terminal

go get -u github.com/rclone/rclone
cd $GOPATH/src/github.com/rclone/rclone
git remote rename origin upstream
git remote add origin [email protected]:YOURUSER/rclone.git

Make a branch to add your new feature

git checkout -b my-new-feature

And get hacking.

When ready - run the unit tests for the code you changed

go test -v

Note that you may need to make a test remote, eg TestSwift for some of the unit tests.

Note the top level Makefile targets

  • make check
  • make test

Both of these will be run by Travis when you make a pull request but you can do this yourself locally too. These require some extra go packages which you can install with

  • make build_dep

Make sure you

When you are done with that

git push origin my-new-feature

Go to the GitHub website and click Create pull request.

You patch will get reviewed and you might get asked to fix some stuff.

If so, then make the changes in the same branch, squash the commits (make multiple commits one commit) by running:

git log # See how many commits you want to squash
git reset --soft HEAD~2 # This squashes the 2 latest commits together.
git status # Check what will happen, if you made a mistake resetting, you can run git reset 'HEAD@{1}' to undo.
git commit # Add a new commit message.
git push --force # Push the squashed commit to your GitHub repo.
# For more, see Stack Overflow, Git docs, or generally Duck around the web. jtagcat also reccommends wizardzines.com

CI for your fork

rclone currently uses GitHub Actions to build and test the project, which should be automatically available for your fork too from the Actions tab in your repository.

Testing

rclone's tests are run from the go testing framework, so at the top level you can run this to run all the tests.

go test -v ./...

rclone contains a mixture of unit tests and integration tests. Because it is difficult (and in some respects pointless) to test cloud storage systems by mocking all their interfaces, rclone unit tests can run against any of the backends. This is done by making specially named remotes in the default config file.

If you wanted to test changes in the drive backend, then you would need to make a remote called TestDrive.

You can then run the unit tests in the drive directory. These tests are skipped if TestDrive: isn't defined.

cd backend/drive
go test -v

You can then run the integration tests which tests all of rclone's operations. Normally these get run against the local filing system, but they can be run against any of the remotes.

cd fs/sync
go test -v -remote TestDrive:
go test -v -remote TestDrive: -fast-list

cd fs/operations
go test -v -remote TestDrive:

If you want to use the integration test framework to run these tests all together with an HTML report and test retries then from the project root:

go install github.com/rclone/rclone/fstest/test_all
test_all -backend drive

If you want to run all the integration tests against all the remotes, then change into the project root and run

make test

This command is run daily on the integration test server. You can find the results at https://pub.rclone.org/integration-tests/

Code Organisation

Rclone code is organised into a small number of top level directories with modules beneath.

  • backend - the rclone backends for interfacing to cloud providers -
    • all - import this to load all the cloud providers
    • ...providers
  • bin - scripts for use while building or maintaining rclone
  • cmd - the rclone commands
    • all - import this to load all the commands
    • ...commands
  • docs - the documentation and website
    • content - adjust these docs only - everything else is autogenerated
      • command - these are auto generated - edit the corresponding .go file
  • fs - main rclone definitions - minimal amount of code
    • accounting - bandwidth limiting and statistics
    • asyncreader - an io.Reader which reads ahead
    • config - manage the config file and flags
    • driveletter - detect if a name is a drive letter
    • filter - implements include/exclude filtering
    • fserrors - rclone specific error handling
    • fshttp - http handling for rclone
    • fspath - path handling for rclone
    • hash - defines rclone's hash types and functions
    • list - list a remote
    • log - logging facilities
    • march - iterates directories in lock step
    • object - in memory Fs objects
    • operations - primitives for sync, eg Copy, Move
    • sync - sync directories
    • walk - walk a directory
  • fstest - provides integration test framework
    • fstests - integration tests for the backends
    • mockdir - mocks an fs.Directory
    • mockobject - mocks an fs.Object
    • test_all - Runs integration tests for everything
  • graphics - the images used in the website etc
  • lib - libraries used by the backend
    • atexit - register functions to run when rclone exits
    • dircache - directory ID to name caching
    • oauthutil - helpers for using oauth
    • pacer - retries with backoff and paces operations
    • readers - a selection of useful io.Readers
    • rest - a thin abstraction over net/http for REST
  • vendor - 3rd party code managed by go mod
  • vfs - Virtual FileSystem layer for implementing rclone mount and similar

Writing Documentation

If you are adding a new feature then please update the documentation.

If you add a new general flag (not for a backend), then document it in docs/content/docs.md - the flags there are supposed to be in alphabetical order.

If you add a new backend option/flag, then it should be documented in the source file in the Help: field. The first line of this is used for the flag help, the remainder is shown to the user in rclone config and is added to the docs with make backenddocs.

The only documentation you need to edit are the docs/content/*.md files. The MANUAL.*, rclone.1, web site etc are all auto generated from those during the release process. See the make doc and make website targets in the Makefile if you are interested in how. You don't need to run these when adding a feature.

Documentation for rclone sub commands is with their code, eg cmd/ls/ls.go.

Note that you can use GitHub's online editor for small changes in the docs which makes it very easy.

Making a release

There are separate instructions for making a release in the RELEASE.md file.

Commit messages

Please make the first line of your commit message a summary of the change that a user (not a developer) of rclone would like to read, and prefix it with the directory of the change followed by a colon. The changelog gets made by looking at just these first lines so make it good!

If you have more to say about the commit, then enter a blank line and carry on the description. Remember to say why the change was needed - the commit itself shows what was changed.

Writing more is better than less. Comparing the behaviour before the change to that after the change is very useful. Imagine you are writing to yourself in 12 months time when you've forgotten everything about what you just did and you need to get up to speed quickly.

If the change fixes an issue then write Fixes #1234 in the commit message. This can be on the subject line if it will fit. If you don't want to close the associated issue just put #1234 and the change will get linked into the issue.

Here is an example of a short commit message:

drive: add team drive support - fixes #885

And here is an example of a longer one:

mount: fix hang on errored upload

In certain circumstances if an upload failed then the mount could hang
indefinitely. This was fixed by closing the read pipe after the Put
completed.  This will cause the write side to return a pipe closed
error fixing the hang.

Fixes #1498

Adding a dependency

rclone uses the go modules support in go1.11 and later to manage its dependencies.

NB you must be using go1.11 or above to add a dependency to rclone. Rclone will still build with older versions of go, but we use the go mod command for dependencies which is only in go1.11 and above.

rclone can be built with modules outside of the GOPATH, but for backwards compatibility with older go versions, rclone also maintains a vendor directory with all the external code rclone needs for building.

The vendor directory is entirely managed by the go mod tool, do not add things manually.

To add a dependency github.com/ncw/new_dependency see the instructions below. These will fetch the dependency, add it to go.mod and go.sum and vendor it for older go versions.

GO111MODULE=on go get github.com/ncw/new_dependency
GO111MODULE=on go mod vendor

You can add constraints on that package when doing go get (see the go docs linked above), but don't unless you really need to.

Please check in the changes generated by go mod including the vendor directory and go.mod and go.sum in a single commit separate from any other code changes with the title "vendor: add github.com/ncw/new_dependency". Remember to git add any new files in vendor.

Updating a dependency

If you need to update a dependency then run

GO111MODULE=on go get -u github.com/pkg/errors
GO111MODULE=on go mod vendor

Check in a single commit as above.

Updating all the dependencies

In order to update all the dependencies then run make update. This just uses the go modules to update all the modules to their latest stable release. Check in the changes in a single commit as above.

This should be done early in the release cycle to pick up new versions of packages in time for them to get some testing.

Updating a backend

If you update a backend then please run the unit tests and the integration tests for that backend.

Assuming the backend is called remote, make create a config entry called TestRemote for the tests to use.

Now cd remote and run go test -v to run the unit tests.

Then cd fs and run go test -v -remote TestRemote: to run the integration tests.

The next section goes into more detail about the tests.

Writing a new backend

Choose a name. The docs here will use remote as an example.

Note that in rclone terminology a file system backend is called a remote or an fs.

Research

  • Look at the interfaces defined in fs/fs.go
  • Study one or more of the existing remotes

Getting going

  • Create backend/remote/remote.go (copy this from a similar remote)
    • box is a good one to start from if you have a directory based remote
    • b2 is a good one to start from if you have a bucket based remote
  • Add your remote to the imports in backend/all/all.go
  • HTTP based remotes are easiest to maintain if they use rclone's rest module, but if there is a really good go SDK then use that instead.
  • Try to implement as many optional methods as possible as it makes the remote more usable.
  • Use lib/encoder to make sure we can encode any path name and rclone info to help determine the encodings needed
    • rclone purge -v TestRemote:rclone-info
    • rclone info --remote-encoding None -vv --write-json remote.json TestRemote:rclone-info
    • go run cmd/info/internal/build_csv/main.go -o remote.csv remote.json
    • open remote.csv in a spreadsheet and examine

Unit tests

  • Create a config entry called TestRemote for the unit tests to use
  • Create a backend/remote/remote_test.go - copy and adjust your example remote
  • Make sure all tests pass with go test -v

Integration tests

  • Add your backend to fstest/test_all/config.yaml
    • Once you've done that then you can use the integration test framework from the project root:
    • go install ./...
    • test_all -backends remote

Or if you want to run the integration tests manually:

  • Make sure integration tests pass with
    • cd fs/operations
    • go test -v -remote TestRemote:
    • cd fs/sync
    • go test -v -remote TestRemote:
  • If your remote defines ListR check with this also
    • go test -v -remote TestRemote: -fast-list

See the testing section for more information on integration tests.

Add your fs to the docs - you'll need to pick an icon for it from fontawesome. Keep lists of remotes in alphabetical order of full name of remote (eg drive is ordered as Google Drive) but with the local file system last.

  • README.md - main GitHub page
  • docs/content/remote.md - main docs page (note the backend options are automatically added to this file with make backenddocs)
    • make sure this has the autogenerated options comments in (see your reference backend docs)
    • update them with make backenddocs - revert any changes in other backends
  • docs/content/overview.md - overview docs
  • docs/content/docs.md - list of remotes in config section
  • docs/content/_index.md - front page of rclone.org
  • docs/layouts/chrome/navbar.html - add it to the website navigation
  • bin/make_manual.py - add the page to the docs constant

Once you've written the docs, run make serve and check they look OK in the web browser and the links (internal and external) all work.

Writing a plugin

New features (backends, commands) can also be added "out-of-tree", through Go plugins. Changes will be kept in a dynamically loaded file instead of being compiled into the main binary. This is useful if you can't merge your changes upstream or don't want to maintain a fork of rclone.

Usage

  • Naming
    • Plugins names must have the pattern librcloneplugin_KIND_NAME.so.
    • KIND should be one of backend, command or bundle.
    • Example: A plugin with backend support for PiFS would be called librcloneplugin_backend_pifs.so.
  • Loading
    • Supported on macOS & Linux as of now. (Go issue for Windows support)
    • Supported on rclone v1.50 or greater.
    • All plugins in the folder specified by variable $RCLONE_PLUGIN_PATH are loaded.
    • If this variable doesn't exist, plugin support is disabled.
    • Plugins must be compiled against the exact version of rclone to work. (The rclone used during building the plugin must be the same as the source of rclone)

Building

To turn your existing additions into a Go plugin, move them to an external repository and change the top-level package name to main.

Check rclone --version and make sure that the plugin's rclone dependency and host Go version match.

Then, run go build -buildmode=plugin -o PLUGIN_NAME.so . to build the plugin.

Go reference

Minimal example