Changelog

v0.2.4-dev

Added: Make device instance configurable
Added: Make device name configurable
Changed: Broker port missing on reconnect
Changed: Fixed service not starting sometimes

v0.2.3

Added: Change PV position via GUI
Changed: Add VRM ID to MQTT client name
Changed: Fix registration to dbus https://github.com/victronenergy/velib_python/commit/494f9aef38f46d6cfcddd8b1242336a0a3a79563

v0.2.2

Changed: Fixed status flapping between running and standby

v0.2.1

Changed: Increased timeout for fetch_meter_stream() from 5 seconds to 60 seconds. Output a warning, if it take longer than 5 seconds

v0.2.0

Added: StatusCode: 7 = Running; 8 = Standby (if power below 5 W)

v0.2.0-beta3

Changed: Fixed that the driver does not start when selecting D5 firmware (#5)

v0.2.0-beta2

Added: Publish Enphase auth token, microinverter config, reporting and producing count
Changed: Set microinveter power to 0 after 1200 seconds instead of 900 seconds

v0.2.0-beta1

Added: Support for D7.x.x firmware
Changed: Improved driver stability
Changed: Improved further the error handling

v0.1.5

Added: Show how much microinverters are currently producing power and if some are not reporting

v0.1.4

Changed: Fix crash when rounding none value

v0.1.3

Added: Frequency
Added: Show to which broker and port the connection was made when logging is set to INFO
Added: Try to reconnect every 15 seconds to MQTT broker, if connection is closed abnormally
Changed: Fixed code errors
Changed: Improved error handling and output

v0.1.2

Added: Better error handling for secondary requests
Added: Don't send 0 values on first run
Added: Set logging level in config.default.ini
Added: Warning message, if a HTTP request took more than 5 s
Added: Warning message, if stream data is not ready after 15 s
Changed: Default settings in config.default.ini
Changed: Fetch inverters - Default interval from 60 s to 300 s
Changed: Fetch inverters - Minimum interval from 5 s to 60 s
Changed: HTTP request timeout from 5 s to 60 s for secondary requests
Changed: Logging levels of different messages for clearer output

v0.1.1

Added: Better error handling
Added: If PV power is below 5 W, than show 0 W. This prevents showing 1-2 W on PV when no sun is shining and during night

v0.1.0

Added: Calculation of energy_forward and energy_reverse, which are not provided by the Enphase Envoy. This allows you now, in combination with the dbus-mqtt-grid driver, to see import and export.
Changed: Small bug fixes
Changed: Code optimizations and cleanup

v0.0.2

Changed: Fixed some minor bugs
Changed: Fixed that no historical data is shown in VRM portal
Added: informations of PV system

v0.0.1

Initial release