Skip to content

Latest commit

 

History

History
67 lines (54 loc) · 3.54 KB

CHANGES.md

File metadata and controls

67 lines (54 loc) · 3.54 KB
Raw

Version history for NESTang - an NES emulator for Tang Primer 20K

v0.11, 2/06/20024

  • Add a "Select core" menu item to switch between snestang and nestang cores. To enable it, just put the .bin core files in the /cores directory.

v0.10, 23/05/2024

  • Support SNES/NES controller, in addition to DS2.

v0.9, 7/04/2024

  • This version adds the iosys softcore, which snestang has used for a while.
    • Directory support.
    • SD cards larger than 32GB with exFAT file system is supported.
    • In-game OSD. Press SELECT-RIGHT to activate.
    • A transparency effect for OSD.
    • One firmware supports both cores. The firmware in snestang repo is updated to recognize the nestang core.
    • Support Tang PMOD TFCARD v2, instead of the old TFCARD v1.

v0.8, 1/4/2024

  • Supports the Sipeed Tang SDRAM v1.2 modules (v0.8rc was for MiSTer SDRAM 3.0 modules).

v0.8rc, 11/12/2023 - The Tang Primer 25k release

  • This releases supports the new Tang Primer 25k, along with Tang Nano 20k.
  • For primer 25k, set up the memory module, hdmi pmod, dualshock2 pmod and microsd pmod as shown in here.
  • The primer 25k build supports the on-board USB-A port for P1, and the dualshock2 ports for P1 and P2.
  • For developers - the code base has been refactored to support both boards. Use gw_sh nano20k.tcl to build for nano 20k, and gw_sh primer25k.tcl to build for primer 25k.

v0.7, 9/18/2023 - FAT32 MicroSD

  • This release only supports Tang Nano 20K.
  • FAT32 MicroSD support. We have switched to FAT32 format for rom loading from MicroSD cards. Simply format your card in FAT32 and place all roms in the root directory.

v0.6, 8/20/2023 - USB gamepads

  • This release only supports Tang Nano 20K.
  • USB gamepad support. In addition to playstation 2 controllers, now low-speed USB gamepads can be connected to the board. USB connectors and a bit circuitry is needed. See usb_gamepad.md

v0.5, 6/4/2023 - The Tang Nano 20k release

  • This release only supports the new Tang Nano 20K board.
  • Direct controller support. Playstation 2 controllers (wired or wireless) can be directly connected to the board through a Sipeed adapter.
  • SD card support. Now games can be loaded through a MicroSD card. Use tools/nes2img.py to generate the SD card image. A simple menu system allows easy navigation. Press S1 button on the board to return to menu.
  • This is the first NESTang version that can operate standalone (without a PC). It is much easier to use. At the same time, game loading and controlling through the PC loader is still supported.
  • Other changes:
    1. Fixed a bug where there's no sound on some TVs.
    2. PS2 controller supports auto-fire buttons (square and triangle buttons)

v0.4, 10/22/2022 - Linux loader

  • New Linux loader for loading ROMs and connect gamepads. Tested on MangoPi MQ-Quad. Should also work on other ARM SBC boards.
  • Use the correct 8:7 pixel aspect ratio for better fidelity. See https://www.nesdev.org/wiki/Overscan.

v0.3, 10/15/2022 - Supporting the dock

  • Support the newly released Tang Primer 20K dock. The HDMI module is no longer needed!
  • Press LB to use the in-game menu to load ROMs.

v0.2.0, 10/7/2022 - The DDR3 release

  • Switch to on-board DDR3 for main memory.

v0.1.0, 9/15/2022 - Initial release

  • 720p HDMI video and sound output.
  • PC-side loader program for game loading and controller input.
  • Cycle accurate emulation quality.
  • Needs a MiSTer SDRAM module. See here for wiring instructions.