TX power seams to be very Low

[M6NBP]

.

[bi7jta]

I will test in my CMU200

[es2ast]

Rural-area, over 200m and audio is clear. MD 380 longer stock antenna.

[bi7jta]

Roger. *de bi7jta CN, 73!* *https://www.facebook.com/winters.cn <https://www.facebook.com/winters.cn>* *https://twitter.com/Winters_CN <https://twitter.com/Winters_CN>* *https://t.me/bi7jta <https://t.me/bi7jta>* 2018-04-15 18:13 GMT+08:00 M6NBP <[email protected]>:

…

DVMega at 0.10mw I get 17km (10ml) This is line off sight and I can still Receive audio from a DVMega to a MD380 We also know a Openspot at 0.20mw will do the same as the above. So the duplex board can not be putting out 0.20mw as es2ast gets 200m and I get less This needs to be looked into as it could be firmware or hardware. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#6 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AU-8iFQVU3VKd8hrgyi0hFd9Af2ZmC3Zks5tox0ygaJpZM4TQNSJ> .

[bi7jta]

TKS for test and feedback the result,M6NBP ,I think your are the first who spend more time to do that, anyone can see your work here. de bi7jta, *de bi7jta CN, 73!* *https://www.facebook.com/winters.cn <https://www.facebook.com/winters.cn>* *https://twitter.com/Winters_CN <https://twitter.com/Winters_CN>* *https://t.me/bi7jta <https://t.me/bi7jta>* 2018-04-16 0:17 GMT+08:00 M6NBP <[email protected]>:

…

*Solved* RFLevel is set to 0 and is not putting out 0.20mw This is done so it does not Flood the Receiving paths If taken above 0 you could potentially damage the RF ADF 7021 chips — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#6 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AU-8iIasbk02liSGlgJof20p1fAYkokbks5to3KLgaJpZM4TQNSJ> .

[bi7jta]

Well test for duplex,tks M6NBP, listening in TG317... de bi7jta,73! *de bi7jta CN, 73!*

…