[0.3.6] Mouse pointer not responding properly on Xorg

[RAKtheUndead]

I've installed the 0.3.6 release from the wii-jessie-sd.img SD card image, updated any packages that could be upgraded from archive.debian.org and attempted installing LXDE using the following command:

# apt install lxde xorg slim --no-include-recommends

LXDE works and the system boots into the display manager following a reboot, but the mouse pointer does not respond correctly, only moving in the Y axis and constantly acting as if the wheel is being scrolled as I move it. I have also attempted to use xdm and lightdm as display managers, with the same results. I've tested this with a Microsoft Wireless Mobile Mouse 3000 and a Logitech G9x, both of which work as expected when using a previous distribution of Wii Linux (XWhiite upgraded to Debian Squeeze, LXDE, Farter framebuffer installed).

Is there a known issue with the mouse with respect to Xorg with this particular kernel and are there any known ways to resolve this?

[Jose64141]

I have the exact same problem. The mouse only moves on the Y axis, but responds only if I move it horizontally (as if the axis were inverted). Most of the time (sometimes it didn't) it behaved like if I was scrolling the wheel. Lastly, it could move to the X axis if I pressed the buttons, but only to the right. I had to resort to XKB mouse emulation.

[tesses50]

Holly s**t me too, but I used a wireless mouse, my wired onn mouse worked fine

[julenuri]

One more here about this weird issue. 😢
Mouse only goes to the right when some button (right or left in the mouse) is moving.

Happens with my Logitech wireless bundle. Under Win, the device is reported as:
CU0010 2.4GHz Transceiver, USB\VID_046D&PID_C534&MI_00\6&223C0871&0&0000 M170 Logitech mouse and HID\VID_046D&PID_C534&MI_01&COL01\7&344BD2&0&0000 K235 Keyboard. HID\VID_046D&PID_C534&MI_00\7&23A2F1F0&0&0000
Under Linux as this:
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M ID 1d6b:0002 Linux Foundation 2.0 root hub |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M ID 046d:c534 Logitech, Inc. Unifying Receiver |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M ID 046d:c534 Logitech, Inc. Unifying Receiver

I don't know if it comes from the xorg side (that came from Jessie repo) because the configuration profile or it comes from the HID/USB drivers of the kernel, and if is a regression or not. I can't say it clearly.

There have been some tickets online for this report in some websites for other
https://www.linuxquestions.org/questions/linux-hardware-18/logitech-mouse-xorg-%3D-doesn%27t-work-207985/

Clearly the keyboard itself works great in the same bundle.