diff --git a/TA.NexDome.Rotator/TA.NexDome.Rotator.vcxproj b/TA.NexDome.Rotator/TA.NexDome.Rotator.vcxproj
index cd92da4..acc2822 100644
--- a/TA.NexDome.Rotator/TA.NexDome.Rotator.vcxproj
+++ b/TA.NexDome.Rotator/TA.NexDome.Rotator.vcxproj
@@ -102,8 +102,8 @@
       <SDLCheck>true</SDLCheck>
       <ForcedIncludeFiles>$(ProjectDir)__vm\.TA.NexDome.Rotator.vsarduino.h;%(ForcedIncludeFiles)</ForcedIncludeFiles>
       <WholeProgramOptimization>false</WholeProgramOptimization>
-      <PreprocessorDefinitions>__AVR_atmega32u4__;__AVR_ATmega32U4__;__AVR_ATmega32u4__;F_CPU=16000000L;ARDUINO=108010;ARDUINO_AVR_LEONARDO;ARDUINO_ARCH_AVR;USB_VID=0x2341;USB_PID=0x8036;__cplusplus=201103L;_VMICRO_INTELLISENSE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
-      <AdditionalIncludeDirectories>$(ProjectDir)..\TA.NexDome.Rotator;$(ProjectDir)..\SharedCode;$(ProjectDir)..\Libraries\ArduinoSTL\1.1.0\ArduinoSTL\src;$(ProjectDir)..\SafeSerial\src;$(ProjectDir)..\XBeeApi;$(ProjectDir)..\XBeeStatemachine;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\hardware\avr\1.8.2\libraries\EEPROM\src;$(ProjectDir)..\AdvancedStepper;$(ProjectDir)..\Timer;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\hardware\avr\1.8.2\cores\arduino;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\hardware\avr\1.8.2\variants\leonardo;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\\lib\gcc\avr\7.3.0\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\\lib\gcc\avr\7.3.0\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include-fixed;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include\avr;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.2\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.2\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.3\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>__AVR_atmega32u4__;__AVR_ATmega32U4__;__AVR_ATmega32u4__;F_CPU=16000000L;ARDUINO=108012;ARDUINO_AVR_LEONARDO;ARDUINO_ARCH_AVR;USB_VID=0x2341;USB_PID=0x8036;__cplusplus=201103L;_VMICRO_INTELLISENSE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <AdditionalIncludeDirectories>$(ProjectDir)..\TA.NexDome.Rotator;$(ProjectDir)..\SharedCode;$(ProjectDir)..\Libraries\ArduinoSTL\1.1.0\ArduinoSTL\src;$(ProjectDir)..\SafeSerial\src;$(ProjectDir)..\XBeeApi;$(ProjectDir)..\XBeeStatemachine;F:\Arduino\hardware\arduino\avr\libraries\EEPROM\src;$(ProjectDir)..\AdvancedStepper;$(ProjectDir)..\Timer;F:\Arduino\hardware\arduino\avr\cores\arduino;F:\Arduino\hardware\arduino\avr\variants\leonardo;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\\lib\gcc\avr\7.3.0\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\\lib\gcc\avr\7.3.0\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include-fixed;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include\avr;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.2\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.2\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.3\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
     </ClCompile>
     <Link>
       <GenerateDebugInformation>true</GenerateDebugInformation>
@@ -154,7 +154,7 @@
   </ImportGroup>
   <ProjectExtensions>
     <VisualStudio>
-      <UserProperties arduino.build.skip_library_file_if_exists_in_project="0" arduino.upload.maximum_size="28672" arduino.upload.speed="57600" config.Debug.customdebug_leonardo_debugger_type="universal" visualmicro.package.name="arduino" arduino.board.property_bag="name=Arduino Leonardo&#xD;&#xA;vid.0=0x2341&#xD;&#xA;pid.0=0x0036&#xD;&#xA;vid.1=0x2341&#xD;&#xA;pid.1=0x8036&#xD;&#xA;vid.2=0x2A03&#xD;&#xA;pid.2=0x0036&#xD;&#xA;vid.3=0x2A03&#xD;&#xA;pid.3=0x8036&#xD;&#xA;upload.tool=avrdude&#xD;&#xA;upload.protocol=avr109&#xD;&#xA;upload.maximum_size=28672&#xD;&#xA;upload.maximum_data_size=2560&#xD;&#xA;upload.speed=57600&#xD;&#xA;upload.disable_flushing=true&#xD;&#xA;upload.use_1200bps_touch=true&#xD;&#xA;upload.wait_for_upload_port=true&#xD;&#xA;bootloader.tool=avrdude&#xD;&#xA;bootloader.low_fuses=0xff&#xD;&#xA;bootloader.high_fuses=0xd8&#xD;&#xA;bootloader.extended_fuses=0xcb&#xD;&#xA;bootloader.file=caterina/Caterina-Leonardo.hex&#xD;&#xA;bootloader.unlock_bits=0x3F&#xD;&#xA;bootloader.lock_bits=0x2F&#xD;&#xA;build.mcu=atmega32u4&#xD;&#xA;build.f_cpu=16000000L&#xD;&#xA;build.vid=0x2341&#xD;&#xA;build.pid=0x8036&#xD;&#xA;build.usb_product=&quot;Arduino Leonardo&quot;&#xD;&#xA;build.board=AVR_LEONARDO&#xD;&#xA;build.core=arduino&#xD;&#xA;build.variant=leonardo&#xD;&#xA;build.extra_flags={build.usb_flags}&#xD;&#xA;runtime.ide.path=F:\Arduino&#xD;&#xA;runtime.os=windows&#xD;&#xA;build.system.path=F:\Arduino\hardware\arduino\avr\system&#xD;&#xA;runtime.ide.version=10809&#xD;&#xA;target_package=arduino&#xD;&#xA;target_platform=avr&#xD;&#xA;runtime.hardware.path=F:\Arduino\hardware\arduino&#xD;&#xA;originalid=leonardo&#xD;&#xA;intellisense.tools.path={runtime.tools.avr-gcc.path}\&#xD;&#xA;intellisense.include.paths={intellisense.tools.path}avr\include;{intellisense.tools.path}avr\include\avr;{intellisense.tools.path}lib\gcc\avr\4.8.1\include;{intellisense.tools.path}lib\gcc\avr\4.9.2\include;{intellisense.tools.path}lib\gcc\avr\4.9.3\include;&#xD;&#xA;tools.atprogram.cmd.path=%AVRSTUDIO_EXE_PATH%\atbackend\atprogram&#xD;&#xA;tools.atprogram.cmd.setwinpath=true&#xD;&#xA;tools.atprogram.program.params.verbose=-v&#xD;&#xA;tools.atprogram.program.params.quiet=-q&#xD;&#xA;tools.atprogram.program.pattern=&quot;{cmd.path}&quot; -d {build.mcu} {program.verbose} {program.extra_params} program -c -f &quot;{build.path}\{build.project_name}.hex&quot;&#xD;&#xA;tools.atprogram.program.xpattern=&quot;{cmd.path}&quot; {AVRSTUDIO_BACKEND_CONNECTION} -d {build.mcu} {program.verbose} {program.extra_params} program -c -f &quot;{build.path}\{build.project_name}.hex&quot;&#xD;&#xA;tools.atprogram.erase.params.verbose=-v&#xD;&#xA;tools.atprogram.erase.params.quiet=-q&#xD;&#xA;tools.atprogram.bootloader.params.verbose=-v&#xD;&#xA;tools.atprogram.bootloader.params.quiet=-q&#xD;&#xA;tools.atprogram.bootloader.pattern=&quot;{cmd.path}&quot; -d {build.mcu} {bootloader.verbose}  program -c -f &quot;{runtime.ide.path}\hardware\arduino\avr\bootloaders\{bootloader.file}&quot;&#xD;&#xA;version=1.6.23&#xD;&#xA;compiler.warning_flags=-w&#xD;&#xA;compiler.warning_flags.none=-w&#xD;&#xA;compiler.warning_flags.default=&#xD;&#xA;compiler.warning_flags.more=-Wall&#xD;&#xA;compiler.warning_flags.all=-Wall -Wextra&#xD;&#xA;compiler.path={runtime.tools.avr-gcc.path}/bin/&#xD;&#xA;compiler.c.cmd=avr-gcc&#xD;&#xA;compiler.c.flags=-c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects&#xD;&#xA;compiler.c.elf.flags={compiler.warning_flags} -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections&#xD;&#xA;compiler.c.elf.cmd=avr-gcc&#xD;&#xA;compiler.S.flags=-c -g -x assembler-with-cpp -flto -MMD&#xD;&#xA;compiler.cpp.cmd=avr-g++&#xD;&#xA;compiler.cpp.flags=-c -g -Os {compiler.warning_flags} -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto&#xD;&#xA;compiler.ar.cmd=avr-gcc-ar&#xD;&#xA;compiler.ar.flags=rcs&#xD;&#xA;compiler.objcopy.cmd=avr-objcopy&#xD;&#xA;compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0&#xD;&#xA;compiler.elf2hex.flags=-O ihex -R .eeprom&#xD;&#xA;compiler.elf2hex.cmd=avr-objcopy&#xD;&#xA;compiler.ldflags=&#xD;&#xA;compiler.size.cmd=avr-size&#xD;&#xA;compiler.c.extra_flags=&#xD;&#xA;compiler.c.elf.extra_flags=&#xD;&#xA;compiler.S.extra_flags=&#xD;&#xA;compiler.cpp.extra_flags=&#xD;&#xA;compiler.ar.extra_flags=&#xD;&#xA;compiler.objcopy.eep.extra_flags=&#xD;&#xA;compiler.elf2hex.extra_flags=&#xD;&#xA;recipe.c.o.pattern=&quot;{compiler.path}{compiler.c.cmd}&quot; {compiler.c.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {includes} &quot;{source_file}&quot; -o &quot;{object_file}&quot;&#xD;&#xA;recipe.cpp.o.pattern=&quot;{compiler.path}{compiler.cpp.cmd}&quot; {compiler.cpp.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {includes} &quot;{source_file}&quot; -o &quot;{object_file}&quot;&#xD;&#xA;recipe.S.o.pattern=&quot;{compiler.path}{compiler.c.cmd}&quot; {compiler.S.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {includes} &quot;{source_file}&quot; -o &quot;{object_file}&quot;&#xD;&#xA;archive_file_path={build.path}/{archive_file}&#xD;&#xA;recipe.ar.pattern=&quot;{compiler.path}{compiler.ar.cmd}&quot; {compiler.ar.flags} {compiler.ar.extra_flags} &quot;{archive_file_path}&quot; &quot;{object_file}&quot;&#xD;&#xA;recipe.c.combine.pattern=&quot;{compiler.path}{compiler.c.elf.cmd}&quot; {compiler.c.elf.flags} -mmcu={build.mcu} {compiler.c.elf.extra_flags} -o &quot;{build.path}/{build.project_name}.elf&quot; {object_files} &quot;{build.path}/{archive_file}&quot; &quot;-L{build.path}&quot; -lm&#xD;&#xA;recipe.objcopy.eep.pattern=&quot;{compiler.path}{compiler.objcopy.cmd}&quot; {compiler.objcopy.eep.flags} {compiler.objcopy.eep.extra_flags} &quot;{build.path}/{build.project_name}.elf&quot; &quot;{build.path}/{build.project_name}.eep&quot;&#xD;&#xA;recipe.objcopy.hex.pattern=&quot;{compiler.path}{compiler.elf2hex.cmd}&quot; {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} &quot;{build.path}/{build.project_name}.elf&quot; &quot;{build.path}/{build.project_name}.hex&quot;&#xD;&#xA;recipe.output.tmp_file={build.project_name}.hex&#xD;&#xA;recipe.output.save_file={build.project_name}.{build.variant}.hex&#xD;&#xA;recipe.size.pattern=&quot;{compiler.path}{compiler.size.cmd}&quot; -A &quot;{build.path}/{build.project_name}.elf&quot;&#xD;&#xA;recipe.size.regex=^(?:\.text|\.data|\.bootloader)\s+([0-9]+).*&#xD;&#xA;recipe.size.regex.data=^(?:\.data|\.bss|\.noinit)\s+([0-9]+).*&#xD;&#xA;recipe.size.regex.eeprom=^(?:\.eeprom)\s+([0-9]+).*&#xD;&#xA;preproc.includes.flags=-w -x c++ -M -MG -MP&#xD;&#xA;recipe.preproc.includes=&quot;{compiler.path}{compiler.cpp.cmd}&quot; {compiler.cpp.flags} {preproc.includes.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {includes} &quot;{source_file}&quot;&#xD;&#xA;preproc.macros.flags=-w -x c++ -E -CC&#xD;&#xA;recipe.preproc.macros=&quot;{compiler.path}{compiler.cpp.cmd}&quot; {compiler.cpp.flags} {preproc.macros.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {includes} &quot;{source_file}&quot; -o &quot;{preprocessed_file_path}&quot;&#xD;&#xA;tools.avrdude.path={runtime.tools.avrdude.path}&#xD;&#xA;tools.avrdude.cmd.path={path}/bin/avrdude&#xD;&#xA;tools.avrdude.config.path={path}/etc/avrdude.conf&#xD;&#xA;tools.avrdude.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA&#xD;&#xA;tools.avrdude.upload.params.verbose=-v&#xD;&#xA;tools.avrdude.upload.params.quiet=-q -q&#xD;&#xA;tools.avrdude.upload.verify=&#xD;&#xA;tools.avrdude.upload.params.noverify=-V&#xD;&#xA;tools.avrdude.upload.pattern=&quot;{cmd.path}&quot; &quot;-C{config.path}&quot; {upload.verbose} {upload.verify} -p{build.mcu} -c{upload.protocol} &quot;-P{serial.port}&quot; -b{upload.speed} -D &quot;-Uflash:w:{build.path}/{build.project_name}.hex:i&quot;&#xD;&#xA;tools.avrdude.program.params.verbose=-v&#xD;&#xA;tools.avrdude.program.params.quiet=-q -q&#xD;&#xA;tools.avrdude.program.verify=&#xD;&#xA;tools.avrdude.program.params.noverify=-V&#xD;&#xA;tools.avrdude.program.pattern=&quot;{cmd.path}&quot; &quot;-C{config.path}&quot; {program.verbose} {program.verify} -p{build.mcu} -c{protocol} {program.extra_params} &quot;-Uflash:w:{build.path}/{build.project_name}.hex:i&quot;&#xD;&#xA;tools.avrdude.erase.params.verbose=-v&#xD;&#xA;tools.avrdude.erase.params.quiet=-q -q&#xD;&#xA;tools.avrdude.erase.pattern=&quot;{cmd.path}&quot; &quot;-C{config.path}&quot; {erase.verbose} -p{build.mcu} -c{protocol} {program.extra_params} -e -Ulock:w:{bootloader.unlock_bits}:m -Uefuse:w:{bootloader.extended_fuses}:m -Uhfuse:w:{bootloader.high_fuses}:m -Ulfuse:w:{bootloader.low_fuses}:m&#xD;&#xA;tools.avrdude.bootloader.params.verbose=-v&#xD;&#xA;tools.avrdude.bootloader.params.quiet=-q -q&#xD;&#xA;tools.avrdude.bootloader.pattern=&quot;{cmd.path}&quot; &quot;-C{config.path}&quot; {bootloader.verbose} -p{build.mcu} -c{protocol} {program.extra_params} &quot;-Uflash:w:{runtime.platform.path}/bootloaders/{bootloader.file}:i&quot; -Ulock:w:{bootloader.lock_bits}:m&#xD;&#xA;tools.avrdude_remote.upload.pattern=/usr/bin/run-avrdude /tmp/sketch.hex {upload.verbose} -p{build.mcu}&#xD;&#xA;tools.avrdude.upload.network_pattern=&quot;{network_cmd}&quot; -address {serial.port} -port {upload.network.port} -sketch &quot;{build.path}/{build.project_name}.hex&quot; -upload {upload.network.endpoint_upload} -sync {upload.network.endpoint_sync} -reset {upload.network.endpoint_reset} -sync_exp {upload.network.sync_return}&#xD;&#xA;build.usb_manufacturer=&quot;Unknown&quot;&#xD;&#xA;build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'&#xD;&#xA;vm.platform.root.path=f:\vs2019-preview\common7\ide\extensions\vaclbusj.ce3\Micro Platforms\arduino16x&#xD;&#xA;avrisp.name=AVR ISP&#xD;&#xA;avrisp.communication=serial&#xD;&#xA;avrisp.protocol=stk500v1&#xD;&#xA;avrisp.program.protocol=stk500v1&#xD;&#xA;avrisp.program.tool=avrdude&#xD;&#xA;avrisp.program.extra_params=-P{serial.port}&#xD;&#xA;avrispmkii.name=AVRISP mkII&#xD;&#xA;avrispmkii.communication=usb&#xD;&#xA;avrispmkii.protocol=stk500v2&#xD;&#xA;avrispmkii.program.protocol=stk500v2&#xD;&#xA;avrispmkii.program.tool=avrdude&#xD;&#xA;avrispmkii.program.extra_params=-Pusb&#xD;&#xA;usbtinyisp.name=USBtinyISP&#xD;&#xA;usbtinyisp.protocol=usbtiny&#xD;&#xA;usbtinyisp.program.tool=avrdude&#xD;&#xA;usbtinyisp.program.extra_params=&#xD;&#xA;arduinoisp.name=ArduinoISP&#xD;&#xA;arduinoisp.protocol=arduinoisp&#xD;&#xA;arduinoisp.program.tool=avrdude&#xD;&#xA;arduinoisp.program.extra_params=&#xD;&#xA;arduinoisporg.name=ArduinoISP.org&#xD;&#xA;arduinoisporg.protocol=arduinoisporg&#xD;&#xA;arduinoisporg.program.tool=avrdude&#xD;&#xA;arduinoisporg.program.extra_params=&#xD;&#xA;usbasp.name=USBasp&#xD;&#xA;usbasp.communication=usb&#xD;&#xA;usbasp.protocol=usbasp&#xD;&#xA;usbasp.program.protocol=usbasp&#xD;&#xA;usbasp.program.tool=avrdude&#xD;&#xA;usbasp.program.extra_params=-Pusb&#xD;&#xA;parallel.name=Parallel Programmer&#xD;&#xA;parallel.protocol=dapa&#xD;&#xA;parallel.force=true&#xD;&#xA;parallel.program.tool=avrdude&#xD;&#xA;parallel.program.extra_params=-F&#xD;&#xA;arduinoasisp.name=Arduino as ISP&#xD;&#xA;arduinoasisp.communication=serial&#xD;&#xA;arduinoasisp.protocol=arduino&#xD;&#xA;arduinoasisp.speed=19200&#xD;&#xA;arduinoasisp.program.protocol=arduino&#xD;&#xA;arduinoasisp.program.speed=19200&#xD;&#xA;arduinoasisp.program.tool=avrdude&#xD;&#xA;arduinoasisp.program.extra_params=-P{serial.port} -b{program.speed}&#xD;&#xA;usbGemma.name=Arduino Gemma&#xD;&#xA;usbGemma.protocol=arduinogemma&#xD;&#xA;usbGemma.program.tool=avrdude&#xD;&#xA;usbGemma.program.extra_params=&#xD;&#xA;usbGemma.config.path={runtime.platform.path}/bootloaders/gemma/avrdude.conf&#xD;&#xA;buspirate.name=BusPirate as ISP&#xD;&#xA;buspirate.communication=serial&#xD;&#xA;buspirate.protocol=buspirate&#xD;&#xA;buspirate.program.protocol=buspirate&#xD;&#xA;buspirate.program.tool=avrdude&#xD;&#xA;buspirate.program.extra_params=-P{serial.port}&#xD;&#xA;stk500.name=Atmel STK500 development board&#xD;&#xA;stk500.communication=serial&#xD;&#xA;stk500.protocol=stk500&#xD;&#xA;stk500.program.protocol=stk500&#xD;&#xA;stk500.program.tool=avrdude&#xD;&#xA;stk500.program.extra_params=-P{serial.port}&#xD;&#xA;jtag3isp.name=Atmel JTAGICE3 (ISP mode)&#xD;&#xA;jtag3isp.communication=usb&#xD;&#xA;jtag3isp.protocol=jtag3isp&#xD;&#xA;jtag3isp.program.protocol=jtag3isp&#xD;&#xA;jtag3isp.program.tool=avrdude&#xD;&#xA;jtag3isp.program.extra_params=&#xD;&#xA;jtag3.name=Atmel JTAGICE3 (JTAG mode)&#xD;&#xA;jtag3.communication=usb&#xD;&#xA;jtag3.protocol=jtag3&#xD;&#xA;jtag3.program.protocol=jtag3&#xD;&#xA;jtag3.program.tool=avrdude&#xD;&#xA;jtag3.program.extra_params=-B0.1&#xD;&#xA;atmel_ice.name=Atmel-ICE (AVR)&#xD;&#xA;atmel_ice.communication=usb&#xD;&#xA;atmel_ice.protocol=atmelice_isp&#xD;&#xA;atmel_ice.program.protocol=atmelice_isp&#xD;&#xA;atmel_ice.program.tool=avrdude&#xD;&#xA;atmel_ice.program.extra_params=-Pusb&#xD;&#xA;runtime.tools.avr-gcc.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;runtime.tools.avr-gcc-5.4.0-atmel3.6.1-arduino2.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;runtime.tools.tools-avr.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;runtime.tools.avrdude.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;runtime.tools.avrdude-6.3.0-arduino14.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;runtime.tools.arduinoOTA.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;runtime.tools.arduinoOTA-1.2.1.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;runtime.tools.arm-none-eabi-gcc.path=C:\Users\Tim\AppData\Local\arduino15\packages\nucDuino\tools\arm-none-eabi-gcc\4.8.3-2014q1&#xD;&#xA;runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\Tim\AppData\Local\arduino15\packages\nucDuino\tools\arm-none-eabi-gcc\4.8.3-2014q1&#xD;&#xA;runtime.tools.esptool.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\esptool\0.4.13&#xD;&#xA;runtime.tools.esptool-0.4.13.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\esptool\0.4.13&#xD;&#xA;runtime.tools.mkspiffs.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\mkspiffs\0.2.0&#xD;&#xA;runtime.tools.mkspiffs-0.2.0.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\mkspiffs\0.2.0&#xD;&#xA;runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\1.20.0-26-gb404fb9-2&#xD;&#xA;runtime.tools.xtensa-lx106-elf-gcc-1.20.0-26-gb404fb9-2.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\1.20.0-26-gb404fb9-2&#xD;&#xA;runtime.vm.boardinfo.id=leonardo&#xD;&#xA;runtime.vm.boardinfo.name=leonardo&#xD;&#xA;runtime.vm.boardinfo.desc=Arduino Leonardo&#xD;&#xA;runtime.vm.boardinfo.src_location=F:\Arduino\hardware\arduino\avr&#xD;&#xA;ide.hint=Use installed IDE. Provides built-in hardware, reference/help and libraries.&#xD;&#xA;ide.location.key=Arduino16x&#xD;&#xA;ide.location.ide.winreg=Arduino 1.6.x Application&#xD;&#xA;ide.location.sketchbook.winreg=Arduino 1.6.x Sketchbook&#xD;&#xA;ide.location.sketchbook.preferences=sketchbook.path&#xD;&#xA;ide.default.revision_name=1.9.0&#xD;&#xA;ide.default.version=10800&#xD;&#xA;ide.default.package=arduino&#xD;&#xA;ide.default.platform=avr&#xD;&#xA;ide.multiplatform=true&#xD;&#xA;ide.includes=Arduino.h&#xD;&#xA;ide.exe_name=arduino&#xD;&#xA;ide.recipe.preproc.defines.flags=-w -x c++ -E -dM&#xD;&#xA;ide.platformswithoutpackage=false&#xD;&#xA;ide.includes.fallback=wprogram.h&#xD;&#xA;ide.extension=ino&#xD;&#xA;ide.extension.fallback=pde&#xD;&#xA;ide.versionGTEQ=160&#xD;&#xA;ide.exe=arduino.exe&#xD;&#xA;ide.builder.exe=arduinobuilder.exe&#xD;&#xA;ide.builder.name=Arduino Builder&#xD;&#xA;ide.hosts=atmel&#xD;&#xA;ide.url=http://arduino.cc/en/Main/Software&#xD;&#xA;ide.help.reference.path=reference&#xD;&#xA;ide.help.reference.path2=reference\www.arduino.cc\en\Reference&#xD;&#xA;ide.help.reference.serial=reference\www.arduino.cc\en\Serial&#xD;&#xA;ide.location.preferences.portable={runtime.ide.path}\portable&#xD;&#xA;ide.location.preferences.arduinoData={runtime.sketchbook.path}\ArduinoData&#xD;&#xA;ide.location.preferences=%VM_APPDATA_LOCAL%\arduino15\preferences.txt&#xD;&#xA;ide.location.preferences_fallback=%VM_APPDATA_ROAMING%\arduino15\preferences.txt&#xD;&#xA;ide.location.contributions=%VM_APPDATA_LOCAL%\arduino15&#xD;&#xA;ide.location.contributions_fallback=%VM_APPDATA_ROAMING%\arduino15&#xD;&#xA;ide.contributions.boards.allow=true&#xD;&#xA;ide.contributions.boards.ignore_unless_rewrite_found=true&#xD;&#xA;ide.contributions.libraries.allow=true&#xD;&#xA;ide.contributions.boards.support.urls.wiki=https://github.com/arduino/Arduino/wiki/Unofficial-list-of-3rd-party-boards-support-urls&#xD;&#xA;ide.create_platforms_from_boardsTXT.teensy=build.core&#xD;&#xA;vm.debug=true&#xD;&#xA;software=ARDUINO&#xD;&#xA;ssh.user.name=root&#xD;&#xA;ssh.user.default.password=arduino&#xD;&#xA;ssh.host.wwwfiles.path=/www/sd&#xD;&#xA;build.working_directory={runtime.ide.path}\java\bin&#xD;&#xA;ide.appid=arduino16x&#xD;&#xA;location.sketchbook=F:\OneDrive\Documents\Arduino&#xD;&#xA;build.core.path=F:\Arduino\hardware\arduino\avr\cores\arduino&#xD;&#xA;vm.core.include=arduino.h&#xD;&#xA;vm.boardsource.path=F:\Arduino\hardware\arduino\avr&#xD;&#xA;runtime.platform.path=F:\Arduino\hardware\arduino\avr&#xD;&#xA;vm.platformname.name=avr&#xD;&#xA;build.arch=AVR&#xD;&#xA;vm.runtime.compiler.shared_library_paths=C:\Users\Tim\source\repos\TA.NexDome\AdvancedStepper;C:\Users\Tim\source\repos\TA.NexDome\Timer;C:\Users\Tim\source\repos\TA.NexDome\XBeeStatemachine;C:\Users\Tim\source\repos\TA.NexDome\XBeeApi&#xD;&#xA;vm.runtime.compiler.shared_project_paths=C:\Users\Tim\source\repos\TA.NexDome\SharedCode&#xD;&#xA;builder.noino=false&#xD;&#xA;build.architecture=avr&#xD;&#xA;vmresolved.compiler.path=F:\Arduino\hardware\tools\avr\bin\&#xD;&#xA;vmresolved.tools.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;" debug.view.FreeMemory="1" visualmicro.application.name="arduino16x" arduino.build.mcu="atmega32u4" arduino.upload.protocol="avr109" arduino.build.f_cpu="16000000L" arduino.board.desc="Arduino Leonardo" arduino.board.name="leonardo" arduino.upload.port="COM12" debug.view.DigitalPins="1" visualmicro.platform.name="avr" arduino.build.core="arduino" VM_ADDITIONAL_PREPROC="" />
+      <UserProperties arduino.board.desc="Arduino Leonardo" arduino.board.name="leonardo" arduino.board.property_bag="name=Arduino Leonardo&#xD;&#xA;vid.0=0x2341&#xD;&#xA;pid.0=0x0036&#xD;&#xA;vid.1=0x2341&#xD;&#xA;pid.1=0x8036&#xD;&#xA;vid.2=0x2A03&#xD;&#xA;pid.2=0x0036&#xD;&#xA;vid.3=0x2A03&#xD;&#xA;pid.3=0x8036&#xD;&#xA;upload.tool=avrdude&#xD;&#xA;upload.protocol=avr109&#xD;&#xA;upload.maximum_size=28672&#xD;&#xA;upload.maximum_data_size=2560&#xD;&#xA;upload.speed=57600&#xD;&#xA;upload.disable_flushing=true&#xD;&#xA;upload.use_1200bps_touch=true&#xD;&#xA;upload.wait_for_upload_port=true&#xD;&#xA;bootloader.tool=avrdude&#xD;&#xA;bootloader.low_fuses=0xff&#xD;&#xA;bootloader.high_fuses=0xd8&#xD;&#xA;bootloader.extended_fuses=0xcb&#xD;&#xA;bootloader.file=caterina/Caterina-Leonardo.hex&#xD;&#xA;bootloader.unlock_bits=0x3F&#xD;&#xA;bootloader.lock_bits=0x2F&#xD;&#xA;build.mcu=atmega32u4&#xD;&#xA;build.f_cpu=16000000L&#xD;&#xA;build.vid=0x2341&#xD;&#xA;build.pid=0x8036&#xD;&#xA;build.usb_product=&quot;Arduino Leonardo&quot;&#xD;&#xA;build.board=AVR_LEONARDO&#xD;&#xA;build.core=arduino&#xD;&#xA;build.variant=leonardo&#xD;&#xA;build.extra_flags={build.usb_flags}&#xD;&#xA;vmboard.totalpins=30&#xD;&#xA;vmboard.totalanalogpins=12&#xD;&#xA;runtime.ide.path=F:\Arduino&#xD;&#xA;runtime.os=windows&#xD;&#xA;build.system.path=F:\Arduino\hardware\arduino\avr\system&#xD;&#xA;runtime.ide.version=108013&#xD;&#xA;target_package=arduino&#xD;&#xA;target_platform=avr&#xD;&#xA;runtime.hardware.path=F:\Arduino\hardware\arduino&#xD;&#xA;originalid=leonardo&#xD;&#xA;intellisense.tools.path={runtime.tools.avr-gcc.path}\&#xD;&#xA;intellisense.include.paths={intellisense.tools.path}\lib\gcc\avr\7.3.0\include;{intellisense.tools.path}avr\include;{intellisense.tools.path}\lib\gcc\avr\7.3.0\include;{intellisense.tools.path}avr\include-fixed;{intellisense.tools.path}avr\include\avr;{intellisense.tools.path}lib\gcc\avr\4.8.1\include;{intellisense.tools.path}lib\gcc\avr\4.9.2\include;{intellisense.tools.path}lib\gcc\avr\4.9.3\include;{vm.intellisense.add-paths}&#xD;&#xA;tools.atprogram.cmd.path=%AVRSTUDIO_EXE_PATH%\atbackend\atprogram&#xD;&#xA;tools.atprogram.cmd.setwinpath=true&#xD;&#xA;tools.atprogram.program.params.verbose=-v&#xD;&#xA;tools.atprogram.program.params.quiet=-q&#xD;&#xA;tools.atprogram.program.pattern=&quot;{cmd.path}&quot; -d {build.mcu} {program.verbose} {program.extra_params} program -c -f &quot;{build.path}\{build.project_name}.hex&quot;&#xD;&#xA;tools.atprogram.program.xpattern=&quot;{cmd.path}&quot; {AVRSTUDIO_BACKEND_CONNECTION} -d {build.mcu} {program.verbose} {program.extra_params} program -c -f &quot;{build.path}\{build.project_name}.hex&quot;&#xD;&#xA;tools.atprogram.erase.params.verbose=-v&#xD;&#xA;tools.atprogram.erase.params.quiet=-q&#xD;&#xA;tools.atprogram.bootloader.params.verbose=-v&#xD;&#xA;tools.atprogram.bootloader.params.quiet=-q&#xD;&#xA;tools.atprogram.bootloader.pattern=&quot;{cmd.path}&quot; -d {build.mcu} {bootloader.verbose}  program -c -f &quot;{runtime.ide.path}\hardware\arduino\avr\bootloaders\{bootloader.file}&quot;&#xD;&#xA;ide.compiler_flags_no_opt=-Og&#xD;&#xA;tools.gdbstub.cmd=avr-gdb.exe&#xD;&#xA;tools.gdbstub.path={runtime.tools.avr-gcc.path}/bin&#xD;&#xA;tools.gdbstub.debug.args=&quot;{{{build.path}/{build.project_name}.elf}}&quot; -ex &quot;target remote \\.\{serial.debug.port}&quot;&#xD;&#xA;tools.gdbstub.showLocalSerialPort=true&#xD;&#xA;debug_menu.hwdebugger.gdbstub=GDB Stub&#xD;&#xA;debug_menu.hwdebugger.gdbstub.debug.tool=gdbstub&#xD;&#xA;meta_gdbstub.sentence=This debugger requires the avr-debugger library (by Jan Dolinay) be included in the project (install via Library Manager or from GitHub).&#xD;&#xA;meta_gdbstub.comment=To use this debugger, install 'avr-debugger' library, add 1) '#include &lt;avr8-stub.h&gt;'  2) add 'debug_init();' to the 'setup()', and add 'breakpoint();' to the top of 'loop()'. Set vMicro &gt; Debugger &gt; 'Compiler Optimization' to 'No Project', 'No Project + Libraries' or 'None' when debugging (NOTE: This might cause compilation errors with certain code such as HardwareSerial.)&#xD;&#xA;meta_gdbstub.image.connect=https://www.visualmicro.com/pics/Debug-Help-Uno_USBOnly.png&#xD;&#xA;meta_gdbstub.image.operation=https://www.visualmicro.com/pics/Debug-Break-Uno-GDBStub-VSOnly.png&#xD;&#xA;meta_gdbstub.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html&#xD;&#xA;version=1.8.3&#xD;&#xA;compiler.warning_flags=-w&#xD;&#xA;compiler.warning_flags.none=-w&#xD;&#xA;compiler.warning_flags.default=&#xD;&#xA;compiler.warning_flags.more=-Wall&#xD;&#xA;compiler.warning_flags.all=-Wall -Wextra&#xD;&#xA;compiler.path={runtime.tools.avr-gcc.path}/bin/&#xD;&#xA;compiler.c.cmd=avr-gcc&#xD;&#xA;compiler.c.flags=-c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects&#xD;&#xA;compiler.c.elf.flags={compiler.warning_flags} -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections&#xD;&#xA;compiler.c.elf.cmd=avr-gcc&#xD;&#xA;compiler.S.flags=-c -g -x assembler-with-cpp -flto -MMD&#xD;&#xA;compiler.cpp.cmd=avr-g++&#xD;&#xA;compiler.cpp.flags=-c -g -Os {compiler.warning_flags} -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto&#xD;&#xA;compiler.ar.cmd=avr-gcc-ar&#xD;&#xA;compiler.ar.flags=rcs&#xD;&#xA;compiler.objcopy.cmd=avr-objcopy&#xD;&#xA;compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0&#xD;&#xA;compiler.elf2hex.flags=-O ihex -R .eeprom&#xD;&#xA;compiler.elf2hex.cmd=avr-objcopy&#xD;&#xA;compiler.ldflags=&#xD;&#xA;compiler.libraries.ldflags=&#xD;&#xA;compiler.size.cmd=avr-size&#xD;&#xA;compiler.c.extra_flags=&#xD;&#xA;compiler.c.elf.extra_flags=&#xD;&#xA;compiler.S.extra_flags=&#xD;&#xA;compiler.cpp.extra_flags=&#xD;&#xA;compiler.ar.extra_flags=&#xD;&#xA;compiler.objcopy.eep.extra_flags=&#xD;&#xA;compiler.elf2hex.extra_flags=&#xD;&#xA;recipe.c.o.pattern=&quot;{compiler.path}{compiler.c.cmd}&quot; {compiler.c.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {includes} &quot;{source_file}&quot; -o &quot;{object_file}&quot;&#xD;&#xA;recipe.cpp.o.pattern=&quot;{compiler.path}{compiler.cpp.cmd}&quot; {compiler.cpp.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {includes} &quot;{source_file}&quot; -o &quot;{object_file}&quot;&#xD;&#xA;recipe.S.o.pattern=&quot;{compiler.path}{compiler.c.cmd}&quot; {compiler.S.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {includes} &quot;{source_file}&quot; -o &quot;{object_file}&quot;&#xD;&#xA;archive_file_path={build.path}/{archive_file}&#xD;&#xA;recipe.ar.pattern=&quot;{compiler.path}{compiler.ar.cmd}&quot; {compiler.ar.flags} {compiler.ar.extra_flags} &quot;{archive_file_path}&quot; &quot;{object_file}&quot;&#xD;&#xA;recipe.c.combine.pattern=&quot;{compiler.path}{compiler.c.elf.cmd}&quot; {compiler.c.elf.flags} -mmcu={build.mcu} {compiler.c.elf.extra_flags} {compiler.ldflags} -o &quot;{build.path}/{build.project_name}.elf&quot; {object_files} {compiler.libraries.ldflags} &quot;{build.path}/{archive_file}&quot; &quot;-L{build.path}&quot; -lm&#xD;&#xA;recipe.objcopy.eep.pattern=&quot;{compiler.path}{compiler.objcopy.cmd}&quot; {compiler.objcopy.eep.flags} {compiler.objcopy.eep.extra_flags} &quot;{build.path}/{build.project_name}.elf&quot; &quot;{build.path}/{build.project_name}.eep&quot;&#xD;&#xA;recipe.objcopy.hex.pattern=&quot;{compiler.path}{compiler.elf2hex.cmd}&quot; {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} &quot;{build.path}/{build.project_name}.elf&quot; &quot;{build.path}/{build.project_name}.hex&quot;&#xD;&#xA;recipe.output.tmp_file={build.project_name}.hex&#xD;&#xA;recipe.output.save_file={build.project_name}.{build.variant}.hex&#xD;&#xA;recipe.size.pattern=&quot;{compiler.path}{compiler.size.cmd}&quot; -A &quot;{build.path}/{build.project_name}.elf&quot;&#xD;&#xA;recipe.size.regex=^(?:\.text|\.data|\.bootloader)\s+([0-9]+).*&#xD;&#xA;recipe.size.regex.data=^(?:\.data|\.bss|\.noinit)\s+([0-9]+).*&#xD;&#xA;recipe.size.regex.eeprom=^(?:\.eeprom)\s+([0-9]+).*&#xD;&#xA;preproc.includes.flags=-w -x c++ -M -MG -MP&#xD;&#xA;recipe.preproc.includes=&quot;{compiler.path}{compiler.cpp.cmd}&quot; {compiler.cpp.flags} {preproc.includes.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {includes} &quot;{source_file}&quot;&#xD;&#xA;preproc.macros.flags=-w -x c++ -E -CC&#xD;&#xA;recipe.preproc.macros=&quot;{compiler.path}{compiler.cpp.cmd}&quot; {compiler.cpp.flags} {preproc.macros.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {includes} &quot;{source_file}&quot; -o &quot;{preprocessed_file_path}&quot;&#xD;&#xA;tools.avrdude.path={runtime.tools.avrdude.path}&#xD;&#xA;tools.avrdude.cmd.path={path}/bin/avrdude&#xD;&#xA;tools.avrdude.config.path={path}/etc/avrdude.conf&#xD;&#xA;tools.avrdude.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA&#xD;&#xA;tools.avrdude.upload.params.verbose=-v&#xD;&#xA;tools.avrdude.upload.params.quiet=-q -q&#xD;&#xA;tools.avrdude.upload.verify=&#xD;&#xA;tools.avrdude.upload.params.noverify=-V&#xD;&#xA;tools.avrdude.upload.pattern=&quot;{cmd.path}&quot; &quot;-C{config.path}&quot; {upload.verbose} {upload.verify} -p{build.mcu} -c{upload.protocol} &quot;-P{serial.port}&quot; -b{upload.speed} -D &quot;-Uflash:w:{build.path}/{build.project_name}.hex:i&quot;&#xD;&#xA;tools.avrdude.program.params.verbose=-v&#xD;&#xA;tools.avrdude.program.params.quiet=-q -q&#xD;&#xA;tools.avrdude.program.verify=&#xD;&#xA;tools.avrdude.program.params.noverify=-V&#xD;&#xA;tools.avrdude.program.pattern=&quot;{cmd.path}&quot; &quot;-C{config.path}&quot; {program.verbose} {program.verify} -p{build.mcu} -c{protocol} {program.extra_params} &quot;-Uflash:w:{build.path}/{build.project_name}.hex:i&quot;&#xD;&#xA;tools.avrdude.erase.params.verbose=-v&#xD;&#xA;tools.avrdude.erase.params.quiet=-q -q&#xD;&#xA;tools.avrdude.erase.pattern=&quot;{cmd.path}&quot; &quot;-C{config.path}&quot; {erase.verbose} -p{build.mcu} -c{protocol} {program.extra_params} -e -Ulock:w:{bootloader.unlock_bits}:m -Uefuse:w:{bootloader.extended_fuses}:m -Uhfuse:w:{bootloader.high_fuses}:m -Ulfuse:w:{bootloader.low_fuses}:m&#xD;&#xA;tools.avrdude.bootloader.params.verbose=-v&#xD;&#xA;tools.avrdude.bootloader.params.quiet=-q -q&#xD;&#xA;tools.avrdude.bootloader.pattern=&quot;{cmd.path}&quot; &quot;-C{config.path}&quot; {bootloader.verbose} -p{build.mcu} -c{protocol} {program.extra_params} &quot;-Uflash:w:{runtime.platform.path}/bootloaders/{bootloader.file}:i&quot; -Ulock:w:{bootloader.lock_bits}:m&#xD;&#xA;tools.avrdude_remote.upload.pattern=/usr/bin/run-avrdude /tmp/sketch.hex {upload.verbose} -p{build.mcu}&#xD;&#xA;tools.avrdude.upload.network_pattern=&quot;{network_cmd}&quot; -address {serial.port} -port {upload.network.port} -sketch &quot;{build.path}/{build.project_name}.hex&quot; -upload {upload.network.endpoint_upload} -sync {upload.network.endpoint_sync} -reset {upload.network.endpoint_reset} -sync_exp {upload.network.sync_return}&#xD;&#xA;build.usb_manufacturer=&quot;Unknown&quot;&#xD;&#xA;build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'&#xD;&#xA;upload.verify=&#xD;&#xA;tools.vmopenocd.cmd=bin/openocd.exe&#xD;&#xA;tools.vmopenocd.cmd.windows=bin/openocd.exe&#xD;&#xA;tools.vmopenocd.debug.params.verbose=-d2&#xD;&#xA;tools.vmopenocd.debug.params.quiet=-d0&#xD;&#xA;tools.vmopenocd.debug.address=localhost:3333&#xD;&#xA;tools.vmopenocd.path={runtime.tools.openocd-0.10.0.20200213.path}&#xD;&#xA;tools.vmopenocd.scriptPath=-s &quot;{path}/scripts/&quot;&#xD;&#xA;tools.vmopenocd.logging=-l &quot;{{build.path}/{build.project_name}_DebugOpenOCD.log}&quot;&#xD;&#xA;tools.vmopenocd.boardCmd=&#xD;&#xA;tools.vmopenocd.targetCmd=&#xD;&#xA;tools.vmopenocd.initCmd=&#xD;&#xA;tools.vmopenocd.debug.pattern=&quot;{path}/{cmd}&quot; {debug.verbose} {logging} {scriptPath} {boardCmd} {targetCmd} {initCmd}&#xD;&#xA;tools.vmopenocd.program.cmd=bin/openocd.exe&#xD;&#xA;tools.vmopenocd.program.cmd.windows=bin/openocd.exe&#xD;&#xA;tools.vmopenocd.program.path={runtime.tools.openocd-0.10.0.20200213.path}&#xD;&#xA;tools.vmopenocd.program.address=localhost:3333&#xD;&#xA;tools.vmopenocd.program.params.verbose=-d2&#xD;&#xA;tools.vmopenocd.program.params.quiet=-d0&#xD;&#xA;tools.vmopenocd.program.elf.message=****[vMicro]**** Uploading ELF :&#xD;&#xA;tools.vmopenocd.program.pattern=&quot;{path}/{cmd}&quot; {program.verbose} {scriptPath} {boardCmd} {targetCmd} -c &quot;echo -n {{program.elf.message}}&quot; {programCmd}&#xD;&#xA;tools.atmelICE.protocol=&#xD;&#xA;tools.atmelICE.debug.cmd=arm-none-eabi-gdb.exe&#xD;&#xA;tools.atmelICE.debug.path={runtime.tools.arm-none-eabi-gcc.path}/bin&#xD;&#xA;tools.atmelICE.debug.pattern=&quot;{path}/{cmd}&quot;&#xD;&#xA;tools.atmelICE.server.initCmd=-c &quot;init; reset halt&quot;&#xD;&#xA;vs-cmd.Debug.AttachtoProcess.tools.atmelICE.server.initCmd=-c &quot;init&quot;&#xD;&#xA;tools.atmelICE.server.boardCmd=-c &quot;adapter driver cmsis-dap&quot; -c &quot;cmsis_dap_vid_pid 0x03eb 0x2141&quot;&#xD;&#xA;tools.atmelICE.server.tool=vmopenocd&#xD;&#xA;tools.atmelICE.program.scriptPath=-s &quot;{program.path}/scripts/&quot;&#xD;&#xA;tools.atmelICE.program.boardCmd=-c &quot;adapter driver cmsis-dap&quot; -c &quot;cmsis_dap_vid_pid 0x03eb 0x2141&quot;&#xD;&#xA;tools.atmelICE.program.cmd=bin/openocd.exe&#xD;&#xA;tools.atmelICE.program.cmd.windows=bin/openocd.exe&#xD;&#xA;tools.atmelICE.program.path={runtime.tools.openocd-0.10.0.20200213.path}&#xD;&#xA;tools.atmelICE.program.address=localhost:3333&#xD;&#xA;tools.atmelICE.program.params.verbose=-d2&#xD;&#xA;tools.atmelICE.program.params.quiet=-d0&#xD;&#xA;tools.atmelICE.program.elf.message=****[vMicro]**** Uploading ELF :&#xD;&#xA;tools.atmelICE.program.pattern=&quot;{program.path}/{program.cmd}&quot; {program.verbose} {program.scriptPath} {program.boardCmd} {program.targetCmd} -c &quot;echo -n {{program.elf.message}}&quot; {program.programCmd}&#xD;&#xA;tools.atmelICE.program.extra_params=&#xD;&#xA;tools.atmelICE.program.protocol=&#xD;&#xA;tools.atmelICE.erase.params.verbose=-d3&#xD;&#xA;tools.atmelICE.erase.params.quiet=-d0&#xD;&#xA;tools.atmelICE.erase.pattern=&#xD;&#xA;tools.jlink.cmd=arm-none-eabi-gdb.exe&#xD;&#xA;tools.jlink.path={runtime.tools.arm-none-eabi-gcc.path}/bin&#xD;&#xA;tools.jlink.pattern=&quot;{path}/{cmd}&quot;&#xD;&#xA;tools.jlink.server.tool=vmopenocd&#xD;&#xA;tools.jlink.server.boardCmd=-f &quot;interface/jlink.cfg&quot;&#xD;&#xA;tools.jlink.server.initCmd=-c &quot;init; reset halt&quot;&#xD;&#xA;vs-cmd.Debug.AttachtoProcess.tools.jlink.server.initCmd=-c &quot;init&quot;&#xD;&#xA;tools.jlink.program.scriptPath=-s &quot;{program.path}/scripts/&quot;&#xD;&#xA;tools.jlink.program.boardCmd=-f &quot;interface/jlink.cfg&quot;&#xD;&#xA;tools.jlink.program.cmd=bin/openocd.exe&#xD;&#xA;tools.jlink.program.cmd.windows=bin/openocd.exe&#xD;&#xA;tools.jlink.program.path={runtime.tools.openocd-0.10.0.20200213.path}&#xD;&#xA;tools.jlink.program.address=localhost:3333&#xD;&#xA;tools.jlink.program.params.verbose=-d2&#xD;&#xA;tools.jlink.program.params.quiet=-d0&#xD;&#xA;tools.jlink.program.elf.message=****[vMicro]**** Uploading ELF :&#xD;&#xA;tools.jlink.program.pattern=&quot;{program.path}/{program.cmd}&quot; {program.verbose} {program.scriptPath} {program.boardCmd} {program.targetCmd} -c &quot;echo -n {{program.elf.message}}&quot; {program.programCmd}&#xD;&#xA;tools.jlink.upload.scriptPath=-s &quot;{upload.path}/scripts/&quot;&#xD;&#xA;tools.jlink.upload.boardCmd=-f &quot;interface/jlink.cfg&quot;&#xD;&#xA;tools.jlink.upload.cmd=bin/openocd.exe&#xD;&#xA;tools.jlink.upload.cmd.windows=bin/openocd.exe&#xD;&#xA;tools.jlink.upload.path={runtime.tools.openocd-0.10.0.20200213.path}&#xD;&#xA;tools.jlink.upload.address=localhost:3333&#xD;&#xA;tools.jlink.upload.params.verbose=-d2&#xD;&#xA;tools.jlink.upload.params.quiet=-d0&#xD;&#xA;tools.jlink.upload.elf.message=****[vMicro]**** Uploading ELF :&#xD;&#xA;tools.jlink.upload.pattern=&quot;{upload.path}/{upload.cmd}&quot; {upload.verbose} {upload.scriptPath} {upload.boardCmd} {upload.targetCmd} -c &quot;echo -n {{upload.elf.message}}&quot; {upload.programCmd}&#xD;&#xA;tools.bmp_upload.cmd=arm-none-eabi-gdb.exe&#xD;&#xA;tools.bmp_upload.debug.path={runtime.tools.arm-none-eabi-gcc.path}/bin/&#xD;&#xA;tools.bmp_upload.program.cmd=bin/arm-none-eabi-gdb.exe&#xD;&#xA;tools.bmp_upload.program.cmd.windows=bin/arm-none-eabi-gdb.exe&#xD;&#xA;tools.bmp_upload.program.path={runtime.tools.arm-none-eabi-gcc.path}&#xD;&#xA;tools.bmp_upload.upload.cmd=bin/arm-none-eabi-gdb.exe&#xD;&#xA;tools.bmp_upload.upload.cmd.windows=bin/arm-none-eabi-gdb.exe&#xD;&#xA;tools.bmp_upload.upload.path={runtime.tools.arm-none-eabi-gcc.path}&#xD;&#xA;tools.bmp_upload.server.initCmd=-c &quot;init; reset halt&quot;&#xD;&#xA;vs-cmd.Debug.AttachtoProcess.tools.bmp_upload.server.initCmd=-c &quot;init&quot;&#xD;&#xA;tools.bmp_upload.showLocalSerialPort=true&#xD;&#xA;tools.stlinkv2.description=&#xD;&#xA;tools.stlinkv2.cmd=arm-none-eabi-gdb.exe&#xD;&#xA;tools.stlinkv2.path={runtime.tools.arm-none-eabi-gcc.path}/bin&#xD;&#xA;tools.stlinkv2.pattern=&quot;{path}/{cmd}&quot;&#xD;&#xA;tools.stlinkv2.server.tool=vmopenocd&#xD;&#xA;tools.stlinkv2.server.boardCmd=-f &quot;interface/stlink.cfg&quot;&#xD;&#xA;tools.stlinkv2.server.initCmd=-c &quot;init; reset halt&quot;&#xD;&#xA;vs-cmd.Debug.AttachtoProcess.tools.stlinkv2.server.initCmd=-c &quot;init&quot;&#xD;&#xA;tools.stlinkv2.upload.scriptPath=-s &quot;{upload.path}/scripts/&quot;&#xD;&#xA;tools.stlinkv2.upload.boardCmd=-f &quot;interface/stlink.cfg&quot;&#xD;&#xA;tools.stlinkv2.upload.cmd=bin/openocd.exe&#xD;&#xA;tools.stlinkv2.upload.cmd.windows=bin/openocd.exe&#xD;&#xA;tools.stlinkv2.upload.path={runtime.tools.openocd-0.10.0.20200213.path}&#xD;&#xA;tools.stlinkv2.upload.address=localhost:3333&#xD;&#xA;tools.stlinkv2.upload.params.verbose=-d2&#xD;&#xA;tools.stlinkv2.upload.params.quiet=-d0&#xD;&#xA;tools.stlinkv2.upload.elf.message=****[vMicro]**** Uploading ELF :&#xD;&#xA;tools.stlinkv2.upload.pattern=&quot;{upload.path}/{upload.cmd}&quot; {upload.verbose} {upload.scriptPath} {upload.boardCmd} {upload.targetCmd} -c &quot;echo -n {{upload.elf.message}}&quot; {upload.programCmd}&#xD;&#xA;tools.stlinkv2.upload.extra_params=&#xD;&#xA;tools.stlinkv2.upload.protocol=&#xD;&#xA;tools.stlinkv2.protocol=&#xD;&#xA;tools.f2232mm.cmd=arm-none-eabi-gdb.exe&#xD;&#xA;tools.f2232mm.path={runtime.tools.arm-none-eabi-gcc.path}/bin&#xD;&#xA;tools.f2232mm.pattern=&quot;{path}/{cmd}&quot; {args}&#xD;&#xA;tools.f2232mm.server.tool=vmopenocd&#xD;&#xA;tools.f2232mm.server.boardCmd=-f &quot;interface/ftdi/minimodule.cfg&quot;&#xD;&#xA;tools.f2232mm.server.initCmd=-c &quot;init; reset halt&quot;&#xD;&#xA;vs-cmd.Debug.AttachtoProcess.tools.f2232mm.server.initCmd=-c &quot;init&quot;&#xD;&#xA;tools.f2232mm.upload.scriptPath=-s &quot;{upload.path}/scripts/&quot;&#xD;&#xA;tools.f2232mm.upload.boardCmd=-f &quot;interface/ftdi/minimodule.cfg&quot;&#xD;&#xA;tools.f2232mm.upload.cmd=bin/openocd.exe&#xD;&#xA;tools.f2232mm.upload.cmd.windows=bin/openocd.exe&#xD;&#xA;tools.f2232mm.upload.path={runtime.tools.openocd-0.10.0.20200213.path}&#xD;&#xA;tools.f2232mm.upload.address=localhost:3333&#xD;&#xA;tools.f2232mm.upload.params.verbose=-d2&#xD;&#xA;tools.f2232mm.upload.params.quiet=-d0&#xD;&#xA;tools.f2232mm.upload.elf.message=****[vMicro]**** Uploading ELF :&#xD;&#xA;tools.f2232mm.upload.pattern=&quot;{upload.path}/{upload.cmd}&quot; {upload.verbose} {upload.scriptPath} {upload.boardCmd} {upload.targetCmd} -c &quot;echo -n {{upload.elf.message}}&quot; {upload.programCmd}&#xD;&#xA;tools.f2232mm.upload.extra_params=&#xD;&#xA;tools.f2232mm.upload.protocol=&#xD;&#xA;tools.f2232mm.protocol=&#xD;&#xA;tools.f2232h.server.boardCmd=-f &quot;interface/ftdi/minimodule-lowcost.cfg&quot;&#xD;&#xA;tools.f2232h.cmd=arm-none-eabi-gdb.exe&#xD;&#xA;tools.f2232h.path={runtime.tools.arm-none-eabi-gcc.path}/bin&#xD;&#xA;tools.f2232h.pattern=&quot;{path}/{cmd}&quot;&#xD;&#xA;tools.f2232h.server.tool=vmopenocd&#xD;&#xA;tools.f2232h.server.initCmd=-c &quot;init; reset halt&quot;&#xD;&#xA;vs-cmd.Debug.AttachtoProcess.tools.f2232h.server.initCmd=-c &quot;init&quot;&#xD;&#xA;tools.f2232h.upload.scriptPath=-s &quot;{upload.path}/scripts/&quot;&#xD;&#xA;tools.f2232h.upload.boardCmd=-f &quot;interface/ftdi/minimodule-lowcost.cfg&quot;&#xD;&#xA;tools.f2232h.upload.cmd=bin/openocd.exe&#xD;&#xA;tools.f2232h.upload.cmd.windows=bin/openocd.exe&#xD;&#xA;tools.f2232h.upload.path={runtime.tools.openocd-0.10.0.20200213.path}&#xD;&#xA;tools.f2232h.upload.address=localhost:3333&#xD;&#xA;tools.f2232h.upload.params.verbose=-d2&#xD;&#xA;tools.f2232h.upload.params.quiet=-d0&#xD;&#xA;tools.f2232h.upload.elf.message=****[vMicro]**** Uploading ELF :&#xD;&#xA;tools.f2232h.upload.pattern=&quot;{upload.path}/{upload.cmd}&quot; {upload.verbose} {upload.scriptPath} {upload.boardCmd} {upload.targetCmd} -c &quot;echo -n {{upload.elf.message}}&quot; {upload.programCmd}&#xD;&#xA;tools.f2232h.upload.extra_params=&#xD;&#xA;tools.f2232h.upload.protocol=&#xD;&#xA;tools.f2232h.protocol=&#xD;&#xA;vm.platform.root.path=f:\vs2019-preview\common7\ide\extensions\taznonos.td4\Micro Platforms\arduino16x&#xD;&#xA;avrisp.name=AVR ISP&#xD;&#xA;avrisp.communication=serial&#xD;&#xA;avrisp.protocol=stk500v1&#xD;&#xA;avrisp.program.protocol=stk500v1&#xD;&#xA;avrisp.program.tool=avrdude&#xD;&#xA;avrisp.program.extra_params=-P{serial.port}&#xD;&#xA;avrispmkii.name=AVRISP mkII&#xD;&#xA;avrispmkii.communication=usb&#xD;&#xA;avrispmkii.protocol=stk500v2&#xD;&#xA;avrispmkii.program.protocol=stk500v2&#xD;&#xA;avrispmkii.program.tool=avrdude&#xD;&#xA;avrispmkii.program.extra_params=-Pusb&#xD;&#xA;usbtinyisp.name=USBtinyISP&#xD;&#xA;usbtinyisp.protocol=usbtiny&#xD;&#xA;usbtinyisp.program.tool=avrdude&#xD;&#xA;usbtinyisp.program.extra_params=&#xD;&#xA;arduinoisp.name=ArduinoISP&#xD;&#xA;arduinoisp.protocol=arduinoisp&#xD;&#xA;arduinoisp.program.tool=avrdude&#xD;&#xA;arduinoisp.program.extra_params=&#xD;&#xA;arduinoisporg.name=ArduinoISP.org&#xD;&#xA;arduinoisporg.protocol=arduinoisporg&#xD;&#xA;arduinoisporg.program.tool=avrdude&#xD;&#xA;arduinoisporg.program.extra_params=&#xD;&#xA;usbasp.name=USBasp&#xD;&#xA;usbasp.communication=usb&#xD;&#xA;usbasp.protocol=usbasp&#xD;&#xA;usbasp.program.protocol=usbasp&#xD;&#xA;usbasp.program.tool=avrdude&#xD;&#xA;usbasp.program.extra_params=-Pusb&#xD;&#xA;parallel.name=Parallel Programmer&#xD;&#xA;parallel.protocol=dapa&#xD;&#xA;parallel.force=true&#xD;&#xA;parallel.program.tool=avrdude&#xD;&#xA;parallel.program.extra_params=-F&#xD;&#xA;arduinoasisp.name=Arduino as ISP&#xD;&#xA;arduinoasisp.communication=serial&#xD;&#xA;arduinoasisp.protocol=stk500v1&#xD;&#xA;arduinoasisp.speed=19200&#xD;&#xA;arduinoasisp.program.protocol=stk500v1&#xD;&#xA;arduinoasisp.program.speed=19200&#xD;&#xA;arduinoasisp.program.tool=avrdude&#xD;&#xA;arduinoasisp.program.extra_params=-P{serial.port} -b{program.speed}&#xD;&#xA;arduinoasispatmega32u4.name=Arduino as ISP (ATmega32U4)&#xD;&#xA;arduinoasispatmega32u4.communication=serial&#xD;&#xA;arduinoasispatmega32u4.protocol=arduino&#xD;&#xA;arduinoasispatmega32u4.speed=19200&#xD;&#xA;arduinoasispatmega32u4.program.protocol=arduino&#xD;&#xA;arduinoasispatmega32u4.program.speed=19200&#xD;&#xA;arduinoasispatmega32u4.program.tool=avrdude&#xD;&#xA;arduinoasispatmega32u4.program.extra_params=-P{serial.port} -b{program.speed}&#xD;&#xA;usbGemma.name=Arduino Gemma&#xD;&#xA;usbGemma.protocol=arduinogemma&#xD;&#xA;usbGemma.program.tool=avrdude&#xD;&#xA;usbGemma.program.extra_params=&#xD;&#xA;usbGemma.config.path={runtime.platform.path}/bootloaders/gemma/avrdude.conf&#xD;&#xA;buspirate.name=BusPirate as ISP&#xD;&#xA;buspirate.communication=serial&#xD;&#xA;buspirate.protocol=buspirate&#xD;&#xA;buspirate.program.protocol=buspirate&#xD;&#xA;buspirate.program.tool=avrdude&#xD;&#xA;buspirate.program.extra_params=-P{serial.port}&#xD;&#xA;stk500.name=Atmel STK500 development board&#xD;&#xA;stk500.communication=serial&#xD;&#xA;stk500.protocol=stk500&#xD;&#xA;stk500.program.protocol=stk500&#xD;&#xA;stk500.program.tool=avrdude&#xD;&#xA;stk500.program.extra_params=-P{serial.port}&#xD;&#xA;jtag3isp.name=Atmel JTAGICE3 (ISP mode)&#xD;&#xA;jtag3isp.communication=usb&#xD;&#xA;jtag3isp.protocol=jtag3isp&#xD;&#xA;jtag3isp.program.protocol=jtag3isp&#xD;&#xA;jtag3isp.program.tool=avrdude&#xD;&#xA;jtag3isp.program.extra_params=&#xD;&#xA;jtag3.name=Atmel JTAGICE3 (JTAG mode)&#xD;&#xA;jtag3.communication=usb&#xD;&#xA;jtag3.protocol=jtag3&#xD;&#xA;jtag3.program.protocol=jtag3&#xD;&#xA;jtag3.program.tool=avrdude&#xD;&#xA;jtag3.program.extra_params=-B0.1&#xD;&#xA;atmel_ice.name=Atmel-ICE (AVR)&#xD;&#xA;atmel_ice.communication=usb&#xD;&#xA;atmel_ice.protocol=atmelice_isp&#xD;&#xA;atmel_ice.program.protocol=atmelice_isp&#xD;&#xA;atmel_ice.program.tool=avrdude&#xD;&#xA;atmel_ice.program.extra_params=-Pusb&#xD;&#xA;runtime.tools.avr-gcc.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;runtime.tools.tools-avr.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;runtime.tools.avrdude.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17&#xD;&#xA;runtime.tools.avrdude-6.3.0-arduino17.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17&#xD;&#xA;runtime.tools.arduinoOTA.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\arduinoOTA\1.3.0&#xD;&#xA;runtime.tools.arduinoOTA-1.3.0.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\arduinoOTA\1.3.0&#xD;&#xA;runtime.tools.arduinoOTA-1.2.1.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\arduinoOTA\1.2.1&#xD;&#xA;runtime.tools.arm-none-eabi-gcc.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\arm-none-eabi-gcc\7-2017q4&#xD;&#xA;runtime.tools.arm-none-eabi-gcc-7-2017q4.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\arm-none-eabi-gcc\7-2017q4&#xD;&#xA;runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino5.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5&#xD;&#xA;runtime.tools.bossac.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\bossac\1.7.0-arduino3&#xD;&#xA;runtime.tools.bossac-1.7.0-arduino3.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\bossac\1.7.0-arduino3&#xD;&#xA;runtime.tools.CMSIS.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\CMSIS\4.5.0&#xD;&#xA;runtime.tools.CMSIS-4.5.0.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\CMSIS\4.5.0&#xD;&#xA;runtime.tools.CMSIS-Atmel.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\CMSIS-Atmel\1.2.0&#xD;&#xA;runtime.tools.CMSIS-Atmel-1.2.0.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\CMSIS-Atmel\1.2.0&#xD;&#xA;runtime.tools.mklittlefs.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\mklittlefs\2.5.0-4-fe5bb56&#xD;&#xA;runtime.tools.mklittlefs-2.5.0-4-fe5bb56.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\mklittlefs\2.5.0-4-fe5bb56&#xD;&#xA;runtime.tools.mkspiffs.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\mkspiffs\2.5.0-4-b40a506&#xD;&#xA;runtime.tools.mkspiffs-2.5.0-4-b40a506.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\mkspiffs\2.5.0-4-b40a506&#xD;&#xA;runtime.tools.openocd.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\openocd\0.10.0-arduino7&#xD;&#xA;runtime.tools.openocd-0.10.0-arduino7.path=C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\openocd\0.10.0-arduino7&#xD;&#xA;runtime.tools.python3.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\python3\3.7.2-post1&#xD;&#xA;runtime.tools.python3-3.7.2-post1.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\python3\3.7.2-post1&#xD;&#xA;runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-4-b40a506&#xD;&#xA;runtime.tools.xtensa-lx106-elf-gcc-2.5.0-4-b40a506.path=C:\Users\Tim\AppData\Local\arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\2.5.0-4-b40a506&#xD;&#xA;runtime.vm.boardinfo.id=leonardo&#xD;&#xA;runtime.vm.boardinfo.name=leonardo&#xD;&#xA;runtime.vm.boardinfo.desc=Arduino Leonardo&#xD;&#xA;runtime.vm.boardinfo.src_location=F:\Arduino\hardware\arduino\avr&#xD;&#xA;ide.hint=Use installed IDE. Provides built-in hardware, reference/help and libraries.&#xD;&#xA;ide.location.key=Arduino16x&#xD;&#xA;ide.location.ide.winreg=Arduino 1.6.x Application&#xD;&#xA;ide.location.sketchbook.winreg=Arduino 1.6.x Sketchbook&#xD;&#xA;ide.location.sketchbook.preferences=sketchbook.path&#xD;&#xA;ide.default.revision_name=1.8.13&#xD;&#xA;ide.default.version=10800&#xD;&#xA;ide.default.package=arduino&#xD;&#xA;ide.default.platform=avr&#xD;&#xA;ide.multiplatform=true&#xD;&#xA;ide.includes=Arduino.h&#xD;&#xA;ide.exe_name=arduino&#xD;&#xA;ide.recipe.preproc.defines.flags=-w -x c++ -E -dM&#xD;&#xA;ide.platformswithoutpackage=false&#xD;&#xA;ide.includes.fallback=wprogram.h&#xD;&#xA;ide.extension=ino&#xD;&#xA;ide.extension.fallback=pde&#xD;&#xA;ide.versionGTEQ=160&#xD;&#xA;ide.exe=arduino.exe&#xD;&#xA;ide.builder.exe=arduinobuilder.exe&#xD;&#xA;ide.builder.name=Arduino Builder&#xD;&#xA;ide.hosts=atmel&#xD;&#xA;ide.url=https://www.visualmicro.com/page/Download-Arduino-Or-Other-Supporting-IDEs.aspx&#xD;&#xA;ide.help.reference.path=reference&#xD;&#xA;ide.help.reference.path2=reference\www.arduino.cc\en\Reference&#xD;&#xA;ide.help.reference.serial=reference\www.arduino.cc\en\Serial&#xD;&#xA;ide.location.preferences.portable={runtime.ide.path}\portable&#xD;&#xA;ide.location.preferences.arduinoData={runtime.sketchbook.path}\ArduinoData&#xD;&#xA;ide.location.preferences=%VM_APPDATA_LOCAL%\arduino15\preferences.txt&#xD;&#xA;ide.location.preferences_fallback=%VM_APPDATA_ROAMING%\arduino15\preferences.txt&#xD;&#xA;ide.location.contributions=%VM_APPDATA_LOCAL%\arduino15&#xD;&#xA;ide.location.contributions_fallback=%VM_APPDATA_ROAMING%\arduino15&#xD;&#xA;ide.contributions.boards.allow=true&#xD;&#xA;ide.contributions.boards.ignore_unless_rewrite_found=true&#xD;&#xA;ide.contributions.libraries.allow=true&#xD;&#xA;ide.contributions.boards.support.urls.wiki=https://github.com/arduino/Arduino/wiki/Unofficial-list-of-3rd-party-boards-support-urls&#xD;&#xA;ide.create_platforms_from_boardsTXT.teensy=build.core&#xD;&#xA;vm.debug=true&#xD;&#xA;software=ARDUINO&#xD;&#xA;ssh.user.name=root&#xD;&#xA;ssh.user.default.password=arduino&#xD;&#xA;ssh.host.wwwfiles.path=/www/sd&#xD;&#xA;build.working_directory={runtime.ide.path}\java\bin&#xD;&#xA;runtime.tools.vm_web_debugger.path={vm.platform.root.path}/../../Micro Debuggers/WebDebugger&#xD;&#xA;recipe.hooks.vmdeploy.vm_web_debugger_postupload.1.pattern=&quot;{runtime.tools.vm_web_debugger.path}/DeployMicroWebserver.exe&quot; &quot;{sketch_path}&quot; &quot;{serial.port}&quot; &quot;{runtime.hardware.path}\..&quot;&#xD;&#xA;recipe.hooks.vmlaunch.vm_web_debugger_preopen.1.pattern=notepad.exe &quot;{sketch_path}\__vm\vmWebDebugger\Start-WebServer.bat&quot;&#xD;&#xA;recipe.hooks.vmlaunch.vm_web_debugger_preopen.2.pattern={sketch_path}\__vm\vmWebDebugger\Start-WebServer.bat&#xD;&#xA;ide.debug_menu.debugger_type=Debug&#xD;&#xA;ide.debug_menu.debugger_type.none=Off&#xD;&#xA;ide.debug_menu.none.debug.tool=no_debug&#xD;&#xA;ide.debug_menu.debugger_type.universal=Serial&#xD;&#xA;ide.debug_menu.universal.debug.tool=auto&#xD;&#xA;ide.debug_menu.debugger_type.hwdebugger=Hardware&#xD;&#xA;ide.debug_menu.hwdebugger=Debugger&#xD;&#xA;ide.debug_menu.hwdebugger.custom_debugger=Manual/Custom&#xD;&#xA;ide.debug_menu.hwdebugger.custom_debugger.debug.tool=dbg_external&#xD;&#xA;ide.meta_custom_debugger.sentence=Provides a build that includes debug defines and will launch a custom debugger if one is provided.&#xD;&#xA;ide.meta_custom_debugger.paragraph=This is option is for advanced use. It is recommended that a pre-configured debugger be selected when available in this list. Usage: Optionally add a customer debugger to the project. A 'debugger_launch.json' file shares the same command syntax that is used by the VsCode debugger. Custom debuggers can be targeted at a board and/or variant and/or configuration name. IE: [variant].[configuration_name][.]debugger_launch.json&#xD;&#xA;ide.meta_custom_debugger.reference.usage.url=https://github.com/Microsoft/vscode-cpptools/blob/master/launch.md#customlaunchsetupcommands&#xD;&#xA;ide.meta_custom_debugger.reference.connect.url=https://docs.microsoft.com/en-us/visualstudio/debugger/create-custom-views-of-native-objects?view=vs-2019&#xD;&#xA;ide.debug_menu.vm_disable_optimization=Disable Optimization&#xD;&#xA;ide.debug_menu.vm_disable_optimization.vm_disable_opt_default=Default Optimization&#xD;&#xA;ide.debug_menu.vm_disable_optimization.vm_disable_opt_proj=No Project  Optimization&#xD;&#xA;ide.debug_menu.vm_disable_opt_proj.vm_disable_opt_project={ide.compiler_flags_no_opt}&#xD;&#xA;ide.debug_menu.vm_disable_optimization.vm_disable_opt_proj_libs=No Project + Libraries Optimization&#xD;&#xA;ide.debug_menu.vm_disable_opt_proj_libs.vm_disable_opt_project={ide.compiler_flags_no_opt}&#xD;&#xA;ide.debug_menu.vm_disable_opt_proj_libs.vm_disable_opt_libraries={ide.compiler_flags_no_opt}&#xD;&#xA;ide.debug_menu.vm_disable_optimization.vm_disable_opt_all=No Optimization&#xD;&#xA;ide.meta_vm_disable_opt_all.sentence=Disable compiler optimization for all sources:- Project, Library and Platform.&#xD;&#xA;ide.meta_vm_disable_opt_all.comment=After switching between 'No Optimization' and other optimization values, please click &quot;Solution Clean&quot; or switch off (or cycle) 'vMicro&gt;Compiler&gt;Shared Cache For Cores'. NOTE: Changing optimization settings can cause build errors or result in overly large programs.&#xD;&#xA;ide.debug_menu.vm_disable_opt_all.vm_disable_opt_project={ide.compiler_flags_no_opt}&#xD;&#xA;ide.debug_menu.vm_disable_opt_all.vm_disable_opt_libraries={ide.compiler_flags_no_opt}&#xD;&#xA;ide.debug_menu.vm_disable_opt_all.vm_disable_opt_core={ide.compiler_flags_no_opt}&#xD;&#xA;ide.appid=arduino16x&#xD;&#xA;location.sketchbook=F:\Arduino-Sketchbook&#xD;&#xA;build.core.path=F:\Arduino\hardware\arduino\avr\cores\arduino&#xD;&#xA;vm.core.include=arduino.h&#xD;&#xA;vm.boardsource.path=F:\Arduino\hardware\arduino\avr&#xD;&#xA;runtime.platform.path=F:\Arduino\hardware\arduino\avr&#xD;&#xA;vm.platformname.name=avr&#xD;&#xA;build.arch=AVR&#xD;&#xA;build.project_name=TA.NexDome.Rotator.ino&#xD;&#xA;build.project_path=D:\VS-Projects\TA.NexDome\TA.NexDome.Rotator&#xD;&#xA;sketch_path=D:\VS-Projects\TA.NexDome\TA.NexDome.Rotator&#xD;&#xA;ProjectDir=D:\VS-Projects\TA.NexDome\TA.NexDome.Rotator\&#xD;&#xA;build.path=C:\Users\Tim\AppData\Local\Temp\VMBuilds\TA.NexDome.Rotator\leonardo\Release&#xD;&#xA;vm.runtime.compiler.shared_library_paths=D:\VS-Projects\TA.NexDome\AdvancedStepper;D:\VS-Projects\TA.NexDome\Timer;D:\VS-Projects\TA.NexDome\XBeeStatemachine;D:\VS-Projects\TA.NexDome\XBeeApi;D:\VS-Projects\TA.NexDome\Libraries\ArduinoSTL\1.1.0\ArduinoSTL;D:\VS-Projects\TA.NexDome\SafeSerial&#xD;&#xA;vm.runtime.compiler.shared_project_paths=D:\VS-Projects\TA.NexDome\SharedCode&#xD;&#xA;vm.sketch_ino_cpp_name=TA.NexDome.Rotator.cpp&#xD;&#xA;builder.noino=false&#xD;&#xA;tools.ctags.path={runtime.tools.ctags.path}&#xD;&#xA;tools.ctags.cmd.path={path}/ctags&#xD;&#xA;tools.ctags.pattern=&quot;{cmd.path}&quot; -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives &quot;{source_file}&quot;&#xD;&#xA;preproc.defines.flags=-w -x c++ -E -dM&#xD;&#xA;build.architecture=avr&#xD;&#xA;vmresolved.compiler.path=F:\Arduino\hardware\tools\avr\bin\&#xD;&#xA;vmresolved.tools.path=F:\Arduino\hardware\tools\avr&#xD;&#xA;debug.tool=no_debug&#xD;&#xA;" arduino.build.core="arduino" arduino.build.f_cpu="16000000L" arduino.build.mcu="atmega32u4" arduino.build.skip_library_file_if_exists_in_project="0" arduino.upload.maximum_size="28672" arduino.upload.port="COM12" arduino.upload.protocol="avr109" arduino.upload.speed="57600" config.Debug.customdebug_leonardo_debugger_type="universal" debug.view.DigitalPins="1" debug.view.FreeMemory="1" visualmicro.application.name="arduino16x" visualmicro.package.name="arduino" visualmicro.platform.name="avr" VM_ADDITIONAL_PREPROC="" />
     </VisualStudio>
   </ProjectExtensions>
 </Project>
\ No newline at end of file
diff --git a/TA.NexDome.Shutter/TA.NexDome.Shutter.vcxproj b/TA.NexDome.Shutter/TA.NexDome.Shutter.vcxproj
index 013b8d8..87a95f6 100644
--- a/TA.NexDome.Shutter/TA.NexDome.Shutter.vcxproj
+++ b/TA.NexDome.Shutter/TA.NexDome.Shutter.vcxproj
@@ -100,10 +100,10 @@
       <FunctionLevelLinking>true</FunctionLevelLinking>
       <IntrinsicFunctions>true</IntrinsicFunctions>
       <SDLCheck>true</SDLCheck>
-      <AdditionalIncludeDirectories>$(ProjectDir)..\TA.NexDome.Shutter;$(ProjectDir)..\SharedCode;$(ProjectDir)..\Libraries\ArduinoSTL\1.1.0\ArduinoSTL\src;$(ProjectDir)..\SafeSerial\src;$(ProjectDir)..\XBeeApi;$(ProjectDir)..\XBeeStatemachine;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\packages\arduino\hardware\avr\1.8.2\libraries\EEPROM\src;$(ProjectDir)..\Timer;$(ProjectDir)..\AdvancedStepper;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\packages\arduino\hardware\avr\1.8.2\cores\arduino;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\packages\arduino\hardware\avr\1.8.2\variants\leonardo;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\\lib\gcc\avr\7.3.0\include;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\\lib\gcc\avr\7.3.0\include;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include-fixed;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include\avr;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.2\include;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.2\include;$(ProjectDir)..\..\..\..\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.3\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <AdditionalIncludeDirectories>$(ProjectDir)..\TA.NexDome.Shutter;$(ProjectDir)..\SharedCode;$(ProjectDir)..\Libraries\ArduinoSTL\1.1.0\ArduinoSTL\src;$(ProjectDir)..\SafeSerial\src;$(ProjectDir)..\XBeeApi;$(ProjectDir)..\XBeeStatemachine;F:\Arduino\hardware\arduino\avr\libraries\EEPROM\src;$(ProjectDir)..\AdvancedStepper;$(ProjectDir)..\Timer;F:\Arduino\hardware\arduino\avr\cores\arduino;F:\Arduino\hardware\arduino\avr\variants\leonardo;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\\lib\gcc\avr\7.3.0\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\\lib\gcc\avr\7.3.0\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include-fixed;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\avr\include\avr;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.2\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.2\include;C:\Users\Tim\AppData\Local\arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5\lib\gcc\avr\4.9.3\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
       <ForcedIncludeFiles>$(ProjectDir)__vm\.TA.NexDome.Shutter.vsarduino.h;%(ForcedIncludeFiles)</ForcedIncludeFiles>
       <WholeProgramOptimization>false</WholeProgramOptimization>
-      <PreprocessorDefinitions>__AVR_atmega32u4__;__AVR_ATmega32U4__;__AVR_ATmega32u4__;F_CPU=16000000L;ARDUINO=108010;ARDUINO_AVR_LEONARDO;ARDUINO_ARCH_AVR;USB_VID=0x2341;USB_PID=0x8036;__cplusplus=201103L;_VMICRO_INTELLISENSE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions>__AVR_atmega32u4__;__AVR_ATmega32U4__;__AVR_ATmega32u4__;F_CPU=16000000L;ARDUINO=108012;ARDUINO_AVR_LEONARDO;ARDUINO_ARCH_AVR;USB_VID=0x2341;USB_PID=0x8036;__cplusplus=201103L;_VMICRO_INTELLISENSE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
     </ClCompile>
     <Link>
       <GenerateDebugInformation>true</GenerateDebugInformation>