openai · seaduboi-openai · Mar 5, 2025
diff --git a/.github/workflows/build.yaml b/.github/workflows/build.yaml
diff --git a/.github/workflows/clang-format-check.yml b/.github/workflows/clang-format-check.yml
diff --git a/CMakeLists.txt b/CMakeLists.txt
diff --git a/README.md b/README.md
@@ -1,46 +1,11 @@
-# Open RealtimeAPI Embedded SDK
+# OpenAI Realtime API Embedded SDK
 
-# Table of Contents
+This repo provides instructions on how to use the [OpenAI Realtime API](https://platform.openai.com/docs/guides/realtime) on Microcontrollers and Embedded Platforms. This repository will be expanded as we support more platforms.
 
-- [Docs](#docs)
-- [Installation](#installation)
-- [Usage](#usage)
+### Espressif
 
-## Platform/Device Support
+Espressif provides an example of using the Realtime API with their [esp_webrtc](https://github.com/espressif/esp-webrtc-solution/tree/main/solutions/openai_demo) library.
 
-This SDK has been developed tested on a `esp32s3` and `linux`. You don't need any physical hardware
-to run this SDK. You can use it from Linux directly.
+## License
 
-To use it on hardware purchase either of these microcontrollers. Others may work, but this is what
-has been developed against.
-
-* [Freenove ESP32-S3-WROOM](https://www.amazon.com/gp/product/B0BMQ8F7FN)
-* [Sonatino - ESP32-S3 Audio Development Board](https://www.amazon.com/gp/product/B0BVY8RJNP)
-
-You can get a ESP32S3 for much less money on eBay/AliExpress.
-
-## Installation
-
-Call `set-target` with the platform you are targetting. Today only `linux` and `esp32s3` are supported.
-* `idf.py set-target esp32s3`
-
-Configure device specific settings. None needed at this time
-* `idf.py menuconfig`
-
-Set your Wifi SSID + Password as env variables
-* `export WIFI_SSID=foo`
-* `export WIFI_PASSWORD=bar`
-* `export OPENAI_API_KEY=bing`
-
-Build
-* `idf.py build`
-
-If you built for `esp32s3` run the following to flash to the device
-* `sudo -E idf.py flash`
-
-If you built for `linux` you can run the binary directly
-* `./build/src.elf`
-
-See [build.yaml](.github/workflows/build.yaml) for a Docker command to do this all in one step.
-
-## Usage
+MIT
diff --git a/components/esp-libopus b/components/esp-libopus
diff --git a/components/esp-protocols b/components/esp-protocols
diff --git a/components/peer/CMakeLists.txt b/components/peer/CMakeLists.txt
diff --git a/components/srtp b/components/srtp
diff --git a/dependencies.lock b/dependencies.lock
diff --git a/deps/libpeer b/deps/libpeer
diff --git a/partitions.csv b/partitions.csv
diff --git a/sdkconfig.defaults b/sdkconfig.defaults
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
diff --git a/src/http.cpp b/src/http.cpp
diff --git a/src/idf_component.yml b/src/idf_component.yml
diff --git a/src/main.cpp b/src/main.cpp
diff --git a/src/main.h b/src/main.h
diff --git a/src/media.cpp b/src/media.cpp
diff --git a/src/webrtc.cpp b/src/webrtc.cpp
diff --git a/src/wifi.cpp b/src/wifi.cpp