Releases: openshwprojects/OpenBK7231T_App
1.18.175
OpenBK7231T/OpenBeken release 1.18.175
WARNING! If installing versions tagged -alpha, please be aware these are development builds and may not be stable! Please do not flash all your devices at once! Make sure you can recover them via UART in case of unexpected issue.
OpenBK7231T/OpenBeken is a Tasmota/ESPHome alternative for modern IoT wifi devices, offering MQTT and Home Assistant compatibility. Although this repository is named OpenBK7231T_App, it has evolved into a multiplatform application, supporting builds for multiple chipsets from various vendors, including ESWIN, Transa Semi, Lightning Semi, Espressif, Beken, WinnerMicro, Xradiotech/Allwinner, Realtek, and Bouffalo Lab.
- BK7231T (eg WB3S, WB2S, WB2L)
- BK7231N (eg CB2S, CB2L, WB2L_M1)
- BK7231S/BK7231U (eg C-8133U, HLK-B30)
- BK7238 (eg NiceMCU, XH-CB3S)
- BK7252 (eg A9 cameras, for testing only! No camera driver is implemented.)
- BK7252N
- T34 (based on BK7231N)
- BL2028N (based on BK7231N)
- CC8000 (based on BK7231U)
- XR809 (eg XR2, XR3)
- XR806 (eg T103C-HL, WXU)
- XR872/XF16
- BL602 (eg DT-BL200, SM-028_V1.3)
- LF686 (based on BL602)
- TG7100C (based on BL602) (eg YX-X3-T71C-VER03)
- W800 (W800-C400, WinnerMicro WiFi & Bluetooth), W801
- W600 (eg TW-01, TW-02, TW-03), W601 (WIS600, ESP-01W)
- LN882H (eg LN-02, WL2S, WL2H)
- ESP32 (including other xtensa/riscv variants)
- ESP8285/ESP8266 1MB/2MB (eg TYWE3S, TYWE2S, ESP-01S, ESP-M2)
- TR6260 (eg HLK-M20, XY-WE2S-A V1.1)
- RTL8711AM (Ameba1 family, models with SDRAM only) (eg WRG1)
- RTL8710B (AmebaZ family) (eg T102_V1.0, W302/T102_V1.0, T112_V1.1, WR2, WR3E, BW14)
- RTL8710C/RTL8720C (AmebaZ2 family) (eg BW15, W701, W701H, WBR2, WBR3, CR3L, CRG1)
- RTL8720D (AmebaD family) (eg BW16, BW16E, W701D, W701DH, WBR3D, WBR3T)
- RTL872xCSM/RTL8720CS (AmebaCS family) (eg WBRG1, WBR3S, WBR3N) (Firmware compatible with RTL8720D)
- RTL87x1DA (AmebaDplus family) (eg BW20, WR11-U, WR11-2S)
- RTL87x0E (AmebaLite family) (eg PKM8710ECF)
- ECR6600 (eg AXYU, AXY2S, WG236, DSM-036, CDI-WX56600A-00, BL-M6600XT1, HF-LPT6200)
Changes
- StripState pin (led_enableAll state output for transistor control for… (#1799) (81d5ffa), closes #1799
Assets
Refer to the following table for the usage of the various assets included in this release
1.18.174
OpenBK7231T/OpenBeken release 1.18.174
WARNING! If installing versions tagged -alpha, please be aware these are development builds and may not be stable! Please do not flash all your devices at once! Make sure you can recover them via UART in case of unexpected issue.
OpenBK7231T/OpenBeken is a Tasmota/ESPHome alternative for modern IoT wifi devices, offering MQTT and Home Assistant compatibility. Although this repository is named OpenBK7231T_App, it has evolved into a multiplatform application, supporting builds for multiple chipsets from various vendors, including ESWIN, Transa Semi, Lightning Semi, Espressif, Beken, WinnerMicro, Xradiotech/Allwinner, Realtek, and Bouffalo Lab.
- BK7231T (eg WB3S, WB2S, WB2L)
- BK7231N (eg CB2S, CB2L, WB2L_M1)
- BK7231S/BK7231U (eg C-8133U, HLK-B30)
- BK7238 (eg NiceMCU, XH-CB3S)
- BK7252 (eg A9 cameras, for testing only! No camera driver is implemented.)
- BK7252N
- T34 (based on BK7231N)
- BL2028N (based on BK7231N)
- CC8000 (based on BK7231U)
- XR809 (eg XR2, XR3)
- XR806 (eg T103C-HL, WXU)
- XR872/XF16
- BL602 (eg DT-BL200, SM-028_V1.3)
- LF686 (based on BL602)
- TG7100C (based on BL602) (eg YX-X3-T71C-VER03)
- W800 (W800-C400, WinnerMicro WiFi & Bluetooth), W801
- W600 (eg TW-01, TW-02, TW-03), W601 (WIS600, ESP-01W)
- LN882H (eg LN-02, WL2S, WL2H)
- ESP32 (including other xtensa/riscv variants)
- ESP8285/ESP8266 1MB/2MB (eg TYWE3S, TYWE2S, ESP-01S, ESP-M2)
- TR6260 (eg HLK-M20, XY-WE2S-A V1.1)
- RTL8711AM (Ameba1 family, models with SDRAM only) (eg WRG1)
- RTL8710B (AmebaZ family) (eg T102_V1.0, W302/T102_V1.0, T112_V1.1, WR2, WR3E, BW14)
- RTL8710C/RTL8720C (AmebaZ2 family) (eg BW15, W701, W701H, WBR2, WBR3, CR3L, CRG1)
- RTL8720D (AmebaD family) (eg BW16, BW16E, W701D, W701DH, WBR3D, WBR3T)
- RTL872xCSM/RTL8720CS (AmebaCS family) (eg WBRG1, WBR3S, WBR3N) (Firmware compatible with RTL8720D)
- RTL87x1DA (AmebaDplus family) (eg BW20, WR11-U, WR11-2S)
- RTL87x0E (AmebaLite family) (eg PKM8710ECF)
- ECR6600 (eg AXYU, AXY2S, WG236, DSM-036, CDI-WX56600A-00, BL-M6600XT1, HF-LPT6200)
Changes
Assets
Refer to the following table for the usage of the various assets included in this release
1.18.173
OpenBK7231T/OpenBeken release 1.18.173
WARNING! If installing versions tagged -alpha, please be aware these are development builds and may not be stable! Please do not flash all your devices at once! Make sure you can recover them via UART in case of unexpected issue.
OpenBK7231T/OpenBeken is a Tasmota/ESPHome alternative for modern IoT wifi devices, offering MQTT and Home Assistant compatibility. Although this repository is named OpenBK7231T_App, it has evolved into a multiplatform application, supporting builds for multiple chipsets from various vendors, including ESWIN, Transa Semi, Lightning Semi, Espressif, Beken, WinnerMicro, Xradiotech/Allwinner, Realtek, and Bouffalo Lab.
- BK7231T (eg WB3S, WB2S, WB2L)
- BK7231N (eg CB2S, CB2L, WB2L_M1)
- BK7231S/BK7231U (eg C-8133U, HLK-B30)
- BK7238 (eg NiceMCU, XH-CB3S)
- BK7252 (eg A9 cameras, for testing only! No camera driver is implemented.)
- BK7252N
- T34 (based on BK7231N)
- BL2028N (based on BK7231N)
- CC8000 (based on BK7231U)
- XR809 (eg XR2, XR3)
- XR806 (eg T103C-HL, WXU)
- XR872/XF16
- BL602 (eg DT-BL200, SM-028_V1.3)
- LF686 (based on BL602)
- TG7100C (based on BL602) (eg YX-X3-T71C-VER03)
- W800 (W800-C400, WinnerMicro WiFi & Bluetooth), W801
- W600 (eg TW-01, TW-02, TW-03), W601 (WIS600, ESP-01W)
- LN882H (eg LN-02, WL2S, WL2H)
- ESP32 (including other xtensa/riscv variants)
- ESP8285/ESP8266 1MB/2MB (eg TYWE3S, TYWE2S, ESP-01S, ESP-M2)
- TR6260 (eg HLK-M20, XY-WE2S-A V1.1)
- RTL8711AM (Ameba1 family, models with SDRAM only) (eg WRG1)
- RTL8710B (AmebaZ family) (eg T102_V1.0, W302/T102_V1.0, T112_V1.1, WR2, WR3E, BW14)
- RTL8710C/RTL8720C (AmebaZ2 family) (eg BW15, W701, W701H, WBR2, WBR3, CR3L, CRG1)
- RTL8720D (AmebaD family) (eg BW16, BW16E, W701D, W701DH, WBR3D, WBR3T)
- RTL872xCSM/RTL8720CS (AmebaCS family) (eg WBRG1, WBR3S, WBR3N) (Firmware compatible with RTL8720D)
- RTL87x1DA (AmebaDplus family) (eg BW20, WR11-U, WR11-2S)
- RTL87x0E (AmebaLite family) (eg PKM8710ECF)
- ECR6600 (eg AXYU, AXY2S, WG236, DSM-036, CDI-WX56600A-00, BL-M6600XT1, HF-LPT6200)
Changes
- DMX works on ESP32 LilyGO, other platforms requires porting code to change baudrate (481cc0e)
Assets
Refer to the following table for the usage of the various assets included in this release
1.18.172
OpenBK7231T/OpenBeken release 1.18.172
WARNING! If installing versions tagged -alpha, please be aware these are development builds and may not be stable! Please do not flash all your devices at once! Make sure you can recover them via UART in case of unexpected issue.
OpenBK7231T/OpenBeken is a Tasmota/ESPHome alternative for modern IoT wifi devices, offering MQTT and Home Assistant compatibility. Although this repository is named OpenBK7231T_App, it has evolved into a multiplatform application, supporting builds for multiple chipsets from various vendors, including ESWIN, Transa Semi, Lightning Semi, Espressif, Beken, WinnerMicro, Xradiotech/Allwinner, Realtek, and Bouffalo Lab.
- BK7231T (eg WB3S, WB2S, WB2L)
- BK7231N (eg CB2S, CB2L, WB2L_M1)
- BK7231S/BK7231U (eg C-8133U, HLK-B30)
- BK7238 (eg NiceMCU, XH-CB3S)
- BK7252 (eg A9 cameras, for testing only! No camera driver is implemented.)
- BK7252N
- T34 (based on BK7231N)
- BL2028N (based on BK7231N)
- CC8000 (based on BK7231U)
- XR809 (eg XR2, XR3)
- XR806 (eg T103C-HL, WXU)
- XR872/XF16
- BL602 (eg DT-BL200, SM-028_V1.3)
- LF686 (based on BL602)
- TG7100C (based on BL602) (eg YX-X3-T71C-VER03)
- W800 (W800-C400, WinnerMicro WiFi & Bluetooth), W801
- W600 (eg TW-01, TW-02, TW-03), W601 (WIS600, ESP-01W)
- LN882H (eg LN-02, WL2S, WL2H)
- ESP32 (including other xtensa/riscv variants)
- ESP8285/ESP8266 1MB/2MB (eg TYWE3S, TYWE2S, ESP-01S, ESP-M2)
- TR6260 (eg HLK-M20, XY-WE2S-A V1.1)
- RTL8711AM (Ameba1 family, models with SDRAM only) (eg WRG1)
- RTL8710B (AmebaZ family) (eg T102_V1.0, W302/T102_V1.0, T112_V1.1, WR2, WR3E, BW14)
- RTL8710C/RTL8720C (AmebaZ2 family) (eg BW15, W701, W701H, WBR2, WBR3, CR3L, CRG1)
- RTL8720D (AmebaD family) (eg BW16, BW16E, W701D, W701DH, WBR3D, WBR3T)
- RTL872xCSM/RTL8720CS (AmebaCS family) (eg WBRG1, WBR3S, WBR3N) (Firmware compatible with RTL8720D)
- RTL87x1DA (AmebaDplus family) (eg BW20, WR11-U, WR11-2S)
- RTL87x0E (AmebaLite family) (eg PKM8710ECF)
- ECR6600 (eg AXYU, AXY2S, WG236, DSM-036, CDI-WX56600A-00, BL-M6600XT1, HF-LPT6200)
Changes
Assets
Refer to the following table for the usage of the various assets included in this release
1.18.171
OpenBK7231T/OpenBeken release 1.18.171
WARNING! If installing versions tagged -alpha, please be aware these are development builds and may not be stable! Please do not flash all your devices at once! Make sure you can recover them via UART in case of unexpected issue.
OpenBK7231T/OpenBeken is a Tasmota/ESPHome alternative for modern IoT wifi devices, offering MQTT and Home Assistant compatibility. Although this repository is named OpenBK7231T_App, it has evolved into a multiplatform application, supporting builds for multiple chipsets from various vendors, including ESWIN, Transa Semi, Lightning Semi, Espressif, Beken, WinnerMicro, Xradiotech/Allwinner, Realtek, and Bouffalo Lab.
- BK7231T (eg WB3S, WB2S, WB2L)
- BK7231N (eg CB2S, CB2L, WB2L_M1)
- BK7231S/BK7231U (eg C-8133U, HLK-B30)
- BK7238 (eg NiceMCU, XH-CB3S)
- BK7252 (eg A9 cameras, for testing only! No camera driver is implemented.)
- BK7252N
- T34 (based on BK7231N)
- BL2028N (based on BK7231N)
- CC8000 (based on BK7231U)
- XR809 (eg XR2, XR3)
- XR806 (eg T103C-HL, WXU)
- XR872/XF16
- BL602 (eg DT-BL200, SM-028_V1.3)
- LF686 (based on BL602)
- TG7100C (based on BL602) (eg YX-X3-T71C-VER03)
- W800 (W800-C400, WinnerMicro WiFi & Bluetooth), W801
- W600 (eg TW-01, TW-02, TW-03), W601 (WIS600, ESP-01W)
- LN882H (eg LN-02, WL2S, WL2H)
- ESP32 (including other xtensa/riscv variants)
- ESP8285/ESP8266 1MB/2MB (eg TYWE3S, TYWE2S, ESP-01S, ESP-M2)
- TR6260 (eg HLK-M20, XY-WE2S-A V1.1)
- RTL8711AM (Ameba1 family, models with SDRAM only) (eg WRG1)
- RTL8710B (AmebaZ family) (eg T102_V1.0, W302/T102_V1.0, T112_V1.1, WR2, WR3E, BW14)
- RTL8710C/RTL8720C (AmebaZ2 family) (eg BW15, W701, W701H, WBR2, WBR3, CR3L, CRG1)
- RTL8720D (AmebaD family) (eg BW16, BW16E, W701D, W701DH, WBR3D, WBR3T)
- RTL872xCSM/RTL8720CS (AmebaCS family) (eg WBRG1, WBR3S, WBR3N) (Firmware compatible with RTL8720D)
- RTL87x1DA (AmebaDplus family) (eg BW20, WR11-U, WR11-2S)
- RTL87x0E (AmebaLite family) (eg PKM8710ECF)
- ECR6600 (eg AXYU, AXY2S, WG236, DSM-036, CDI-WX56600A-00, BL-M6600XT1, HF-LPT6200)
Changes
Assets
Refer to the following table for the usage of the various assets included in this release
1.18.170
OpenBK7231T/OpenBeken release 1.18.170
WARNING! If installing versions tagged -alpha, please be aware these are development builds and may not be stable! Please do not flash all your devices at once! Make sure you can recover them via UART in case of unexpected issue.
OpenBK7231T/OpenBeken is a Tasmota/ESPHome alternative for modern IoT wifi devices, offering MQTT and Home Assistant compatibility. Although this repository is named OpenBK7231T_App, it has evolved into a multiplatform application, supporting builds for multiple chipsets from various vendors, including ESWIN, Transa Semi, Lightning Semi, Espressif, Beken, WinnerMicro, Xradiotech/Allwinner, Realtek, and Bouffalo Lab.
- BK7231T (eg WB3S, WB2S, WB2L)
- BK7231N (eg CB2S, CB2L, WB2L_M1)
- BK7231S/BK7231U (eg C-8133U, HLK-B30)
- BK7238 (eg NiceMCU, XH-CB3S)
- BK7252 (eg A9 cameras, for testing only! No camera driver is implemented.)
- BK7252N
- T34 (based on BK7231N)
- BL2028N (based on BK7231N)
- CC8000 (based on BK7231U)
- XR809 (eg XR2, XR3)
- XR806 (eg T103C-HL, WXU)
- XR872/XF16
- BL602 (eg DT-BL200, SM-028_V1.3)
- LF686 (based on BL602)
- TG7100C (based on BL602) (eg YX-X3-T71C-VER03)
- W800 (W800-C400, WinnerMicro WiFi & Bluetooth), W801
- W600 (eg TW-01, TW-02, TW-03), W601 (WIS600, ESP-01W)
- LN882H (eg LN-02, WL2S, WL2H)
- ESP32 (including other xtensa/riscv variants)
- ESP8285/ESP8266 1MB/2MB (eg TYWE3S, TYWE2S, ESP-01S, ESP-M2)
- TR6260 (eg HLK-M20, XY-WE2S-A V1.1)
- RTL8711AM (Ameba1 family, models with SDRAM only) (eg WRG1)
- RTL8710B (AmebaZ family) (eg T102_V1.0, W302/T102_V1.0, T112_V1.1, WR2, WR3E, BW14)
- RTL8710C/RTL8720C (AmebaZ2 family) (eg BW15, W701, W701H, WBR2, WBR3, CR3L, CRG1)
- RTL8720D (AmebaD family) (eg BW16, BW16E, W701D, W701DH, WBR3D, WBR3T)
- RTL872xCSM/RTL8720CS (AmebaCS family) (eg WBRG1, WBR3S, WBR3N) (Firmware compatible with RTL8720D)
- RTL87x1DA (AmebaDplus family) (eg BW20, WR11-U, WR11-2S)
- RTL87x0E (AmebaLite family) (eg PKM8710ECF)
- ECR6600 (eg AXYU, AXY2S, WG236, DSM-036, CDI-WX56600A-00, BL-M6600XT1, HF-LPT6200)
Changes
- skip ping watchdog commands if pwatchdog is not enabled (9cc5519)
Assets
Refer to the following table for the usage of the various assets included in this release
1.18.169
OpenBK7231T/OpenBeken release 1.18.169
WARNING! If installing versions tagged -alpha, please be aware these are development builds and may not be stable! Please do not flash all your devices at once! Make sure you can recover them via UART in case of unexpected issue.
OpenBK7231T/OpenBeken is a Tasmota/ESPHome alternative for modern IoT wifi devices, offering MQTT and Home Assistant compatibility. Although this repository is named OpenBK7231T_App, it has evolved into a multiplatform application, supporting builds for multiple chipsets from various vendors, including ESWIN, Transa Semi, Lightning Semi, Espressif, Beken, WinnerMicro, Xradiotech/Allwinner, Realtek, and Bouffalo Lab.
- BK7231T (eg WB3S, WB2S, WB2L)
- BK7231N (eg CB2S, CB2L, WB2L_M1)
- BK7231S/BK7231U (eg C-8133U, HLK-B30)
- BK7238 (eg NiceMCU, XH-CB3S)
- BK7252 (eg A9 cameras, for testing only! No camera driver is implemented.)
- BK7252N
- T34 (based on BK7231N)
- BL2028N (based on BK7231N)
- CC8000 (based on BK7231U)
- XR809 (eg XR2, XR3)
- XR806 (eg T103C-HL, WXU)
- XR872/XF16
- BL602 (eg DT-BL200, SM-028_V1.3)
- LF686 (based on BL602)
- TG7100C (based on BL602) (eg YX-X3-T71C-VER03)
- W800 (W800-C400, WinnerMicro WiFi & Bluetooth), W801
- W600 (eg TW-01, TW-02, TW-03), W601 (WIS600, ESP-01W)
- LN882H (eg LN-02, WL2S, WL2H)
- ESP32 (including other xtensa/riscv variants)
- ESP8285/ESP8266 1MB/2MB (eg TYWE3S, TYWE2S, ESP-01S, ESP-M2)
- TR6260 (eg HLK-M20, XY-WE2S-A V1.1)
- RTL8711AM (Ameba1 family, models with SDRAM only) (eg WRG1)
- RTL8710B (AmebaZ family) (eg T102_V1.0, W302/T102_V1.0, T112_V1.1, WR2, WR3E, BW14)
- RTL8710C/RTL8720C (AmebaZ2 family) (eg BW15, W701, W701H, WBR2, WBR3, CR3L, CRG1)
- RTL8720D (AmebaD family) (eg BW16, BW16E, W701D, W701DH, WBR3D, WBR3T)
- RTL872xCSM/RTL8720CS (AmebaCS family) (eg WBRG1, WBR3S, WBR3N) (Firmware compatible with RTL8720D)
- RTL87x1DA (AmebaDplus family) (eg BW20, WR11-U, WR11-2S)
- RTL87x0E (AmebaLite family) (eg PKM8710ECF)
- ECR6600 (eg AXYU, AXY2S, WG236, DSM-036, CDI-WX56600A-00, BL-M6600XT1, HF-LPT6200)
Changes
Assets
Refer to the following table for the usage of the various assets included in this release
1.18.168
OpenBK7231T/OpenBeken release 1.18.168
WARNING! If installing versions tagged -alpha, please be aware these are development builds and may not be stable! Please do not flash all your devices at once! Make sure you can recover them via UART in case of unexpected issue.
OpenBK7231T/OpenBeken is a Tasmota/ESPHome alternative for modern IoT wifi devices, offering MQTT and Home Assistant compatibility. Although this repository is named OpenBK7231T_App, it has evolved into a multiplatform application, supporting builds for multiple chipsets from various vendors, including ESWIN, Transa Semi, Lightning Semi, Espressif, Beken, WinnerMicro, Xradiotech/Allwinner, Realtek, and Bouffalo Lab.
- BK7231T (eg WB3S, WB2S, WB2L)
- BK7231N (eg CB2S, CB2L, WB2L_M1)
- BK7231S/BK7231U (eg C-8133U, HLK-B30)
- BK7238 (eg NiceMCU, XH-CB3S)
- BK7252 (eg A9 cameras, for testing only! No camera driver is implemented.)
- BK7252N
- T34 (based on BK7231N)
- BL2028N (based on BK7231N)
- CC8000 (based on BK7231U)
- XR809 (eg XR2, XR3)
- XR806 (eg T103C-HL, WXU)
- XR872/XF16
- BL602 (eg DT-BL200, SM-028_V1.3)
- LF686 (based on BL602)
- TG7100C (based on BL602) (eg YX-X3-T71C-VER03)
- W800 (W800-C400, WinnerMicro WiFi & Bluetooth), W801
- W600 (eg TW-01, TW-02, TW-03), W601 (WIS600, ESP-01W)
- LN882H (eg LN-02, WL2S, WL2H)
- ESP32 (including other xtensa/riscv variants)
- ESP8285/ESP8266 1MB/2MB (eg TYWE3S, TYWE2S, ESP-01S, ESP-M2)
- TR6260 (eg HLK-M20, XY-WE2S-A V1.1)
- RTL8711AM (Ameba1 family, models with SDRAM only) (eg WRG1)
- RTL8710B (AmebaZ family) (eg T102_V1.0, W302/T102_V1.0, T112_V1.1, WR2, WR3E, BW14)
- RTL8710C/RTL8720C (AmebaZ2 family) (eg BW15, W701, W701H, WBR2, WBR3, CR3L, CRG1)
- RTL8720D (AmebaD family) (eg BW16, BW16E, W701D, W701DH, WBR3D, WBR3T)
- RTL872xCSM/RTL8720CS (AmebaCS family) (eg WBRG1, WBR3S, WBR3N) (Firmware compatible with RTL8720D)
- RTL87x1DA (AmebaDplus family) (eg BW20, WR11-U, WR11-2S)
- RTL87x0E (AmebaLite family) (eg PKM8710ECF)
- ECR6600 (eg AXYU, AXY2S, WG236, DSM-036, CDI-WX56600A-00, BL-M6600XT1, HF-LPT6200)
Changes
- prepare for I2C LED channels skip (78ce33f)
Assets
Refer to the following table for the usage of the various assets included in this release
1.18.167
OpenBK7231T/OpenBeken release 1.18.167
WARNING! If installing versions tagged -alpha, please be aware these are development builds and may not be stable! Please do not flash all your devices at once! Make sure you can recover them via UART in case of unexpected issue.
OpenBK7231T/OpenBeken is a Tasmota/ESPHome alternative for modern IoT wifi devices, offering MQTT and Home Assistant compatibility. Although this repository is named OpenBK7231T_App, it has evolved into a multiplatform application, supporting builds for multiple chipsets from various vendors, including ESWIN, Transa Semi, Lightning Semi, Espressif, Beken, WinnerMicro, Xradiotech/Allwinner, Realtek, and Bouffalo Lab.
- BK7231T (eg WB3S, WB2S, WB2L)
- BK7231N (eg CB2S, CB2L, WB2L_M1)
- BK7231S/BK7231U (eg C-8133U, HLK-B30)
- BK7238 (eg NiceMCU, XH-CB3S)
- BK7252 (eg A9 cameras, for testing only! No camera driver is implemented.)
- BK7252N
- T34 (based on BK7231N)
- BL2028N (based on BK7231N)
- CC8000 (based on BK7231U)
- XR809 (eg XR2, XR3)
- XR806 (eg T103C-HL, WXU)
- XR872/XF16
- BL602 (eg DT-BL200, SM-028_V1.3)
- LF686 (based on BL602)
- TG7100C (based on BL602) (eg YX-X3-T71C-VER03)
- W800 (W800-C400, WinnerMicro WiFi & Bluetooth), W801
- W600 (eg TW-01, TW-02, TW-03), W601 (WIS600, ESP-01W)
- LN882H (eg LN-02, WL2S, WL2H)
- ESP32 (including other xtensa/riscv variants)
- ESP8285/ESP8266 1MB/2MB (eg TYWE3S, TYWE2S, ESP-01S, ESP-M2)
- TR6260 (eg HLK-M20, XY-WE2S-A V1.1)
- RTL8711AM (Ameba1 family, models with SDRAM only) (eg WRG1)
- RTL8710B (AmebaZ family) (eg T102_V1.0, W302/T102_V1.0, T112_V1.1, WR2, WR3E, BW14)
- RTL8710C/RTL8720C (AmebaZ2 family) (eg BW15, W701, W701H, WBR2, WBR3, CR3L, CRG1)
- RTL8720D (AmebaD family) (eg BW16, BW16E, W701D, W701DH, WBR3D, WBR3T)
- RTL872xCSM/RTL8720CS (AmebaCS family) (eg WBRG1, WBR3S, WBR3N) (Firmware compatible with RTL8720D)
- RTL87x1DA (AmebaDplus family) (eg BW20, WR11-U, WR11-2S)
- RTL87x0E (AmebaLite family) (eg PKM8710ECF)
- ECR6600 (eg AXYU, AXY2S, WG236, DSM-036, CDI-WX56600A-00, BL-M6600XT1, HF-LPT6200)
Changes
Assets
Refer to the following table for the usage of the various assets included in this release
1.18.166
OpenBK7231T/OpenBeken release 1.18.166
WARNING! If installing versions tagged -alpha, please be aware these are development builds and may not be stable! Please do not flash all your devices at once! Make sure you can recover them via UART in case of unexpected issue.
OpenBK7231T/OpenBeken is a Tasmota/ESPHome alternative for modern IoT wifi devices, offering MQTT and Home Assistant compatibility. Although this repository is named OpenBK7231T_App, it has evolved into a multiplatform application, supporting builds for multiple chipsets from various vendors, including ESWIN, Transa Semi, Lightning Semi, Espressif, Beken, WinnerMicro, Xradiotech/Allwinner, Realtek, and Bouffalo Lab.
- BK7231T (eg WB3S, WB2S, WB2L)
- BK7231N (eg CB2S, CB2L, WB2L_M1)
- BK7231S/BK7231U (eg C-8133U, HLK-B30)
- BK7238 (eg NiceMCU, XH-CB3S)
- BK7252 (eg A9 cameras, for testing only! No camera driver is implemented.)
- BK7252N
- T34 (based on BK7231N)
- BL2028N (based on BK7231N)
- CC8000 (based on BK7231U)
- XR809 (eg XR2, XR3)
- XR806 (eg T103C-HL, WXU)
- XR872/XF16
- BL602 (eg DT-BL200, SM-028_V1.3)
- LF686 (based on BL602)
- TG7100C (based on BL602) (eg YX-X3-T71C-VER03)
- W800 (W800-C400, WinnerMicro WiFi & Bluetooth), W801
- W600 (eg TW-01, TW-02, TW-03), W601 (WIS600, ESP-01W)
- LN882H (eg LN-02, WL2S, WL2H)
- ESP32 (including other xtensa/riscv variants)
- ESP8285/ESP8266 1MB/2MB (eg TYWE3S, TYWE2S, ESP-01S, ESP-M2)
- TR6260 (eg HLK-M20, XY-WE2S-A V1.1)
- RTL8711AM (Ameba1 family, models with SDRAM only) (eg WRG1)
- RTL8710B (AmebaZ family) (eg T102_V1.0, W302/T102_V1.0, T112_V1.1, WR2, WR3E, BW14)
- RTL8710C/RTL8720C (AmebaZ2 family) (eg BW15, W701, W701H, WBR2, WBR3, CR3L, CRG1)
- RTL8720D (AmebaD family) (eg BW16, BW16E, W701D, W701DH, WBR3D, WBR3T)
- RTL872xCSM/RTL8720CS (AmebaCS family) (eg WBRG1, WBR3S, WBR3N) (Firmware compatible with RTL8720D)
- RTL87x1DA (AmebaDplus family) (eg BW20, WR11-U, WR11-2S)
- RTL87x0E (AmebaLite family) (eg PKM8710ECF)
- ECR6600 (eg AXYU, AXY2S, WG236, DSM-036, CDI-WX56600A-00, BL-M6600XT1, HF-LPT6200)
Changes
Assets
Refer to the following table for the usage of the various assets included in this release