Updated delayed_event testbench

Author: pConst

delayed_event_tb.sv

@@ -0,0 +1,187 @@
+//------------------------------------------------------------------------------
+// delayed_event_tb.sv
+// published as part of https://github.com/pConst/basic_verilog
+// Konstantin Pavlov, [email protected]
+//------------------------------------------------------------------------------
+
+// INFO ------------------------------------------------------------------------
+// Testbench for delayed_event.sv
+
+// use this define to make some things differently in simulation
+`define SIMULATION yes
+
+`timescale 1ns / 1ps
+
+module delayed_event_tb();
+
+initial begin
+  // Print out time markers in nanoseconds
+  // Example:  $display("[T=%0t] start=%d", $realtime, start);
+  $timeformat(-9, 3, " ns");
+
+  // seed value setting is intentionally manual to achieve repeatability between sim runs
+  $urandom( 1 );  // SEED value
+end
+
+logic clk200;
+sim_clk_gen #(
+  .FREQ( 200_000_000 ), // in Hz
+  .PHASE( 0 ),          // in degrees
+  .DUTY( 50 ),          // in percentage
+  .DISTORT( 10 )        // in picoseconds
+) clk200_gen (
+  .ena( 1'b1 ),
+  .clk( clk200 ),
+  .clkd(  )
+);
+
+logic nrst_once;
+
+logic [31:0] clk200_div;
+clk_divider #(
+  .WIDTH( 32 )
+) cd1 (
+  .clk( clk200 ),
+  .nrst( nrst_once ),
+  .ena( 1'b1 ),
+  .out( clk200_div[31:0] )
+);
+
+logic [31:0] clk200_div_rise;
+edge_detect ed1[31:0] (
+  .clk( {32{clk200}} ),
+  .anrst( {32{nrst_once}} ),
+  .in( clk200_div[31:0] ),
+  .rising( clk200_div_rise[31:0] ),
+  .falling(  ),
+  .both(  )
+);
+
+// external device "asynchronous" clock
+logic clk33;
+logic clk33d;
+sim_clk_gen #(
+  .FREQ( 200_000_000 ), // in Hz
+  .PHASE( 0 ),          // in degrees
+  .DUTY( 50 ),          // in percentage
+  .DISTORT( 1000 )      // in picoseconds
+) clk33_gen (
+  .ena( 1'b1 ),
+  .clk( clk33 ),
+  .clkd( clk33d )
+);
+
+
+logic rst;
+initial begin
+  rst = 1'b0; // initialization
+  repeat( 1 ) @(posedge clk200);
+
+  forever begin
+    repeat( 1 ) @(posedge clk200); // synchronous rise
+    rst = 1'b1;
+    //$urandom( 1 ); // uncomment to get the same random pattern EVERY nrst
+
+    repeat( 2 ) @(posedge clk200); // synchronous fall, controls rst pulse width
+    rst = 1'b0;
+
+    repeat( 100 ) @(posedge clk200); // controls test body width
+  end
+end
+logic nrst;
+assign nrst = ~rst;
+
+
+logic rst_once;
+initial begin
+  rst_once = 1'b0; // initialization
+  repeat( 1 ) @(posedge clk200);
+
+  repeat( 1 ) @(posedge clk200); // synchronous rise
+  rst_once = 1'b1;
+
+  repeat( 2 ) @(posedge clk200); // synchronous fall, controls rst_once pulse width
+  rst_once = 1'b0;
+end
+//logic nrst_once; // declared before
+assign nrst_once = ~rst_once;
+
+
+// random pattern generation
+logic [31:0] rnd_data;
+always_ff @(posedge clk200) begin
+  rnd_data[31:0] <= $urandom;
+  end
+
+initial forever begin
+  @(posedge nrst);
+  $display("[T=%0t] rnd_data[]=%h", $realtime, rnd_data[31:0]);
+end
+
+
+// helper start strobe appears unpredictable up to 20 clocks after nrst
+logic start;
+initial forever begin
+  start = 1'b0; // initialization
+
+  @(posedge nrst); // synchronous rise after EVERY nrst
+  repeat( $urandom_range(0, 20) ) @(posedge clk200);
+  start = 1'b1;
+
+  @(posedge clk200); // synchronous fall exactly 1 clock after rise
+  start = 1'b0;
+end
+
+
+initial begin
+//  #10000 $stop;
+//  #10000 $finish;
+end
+
+// sweeping pulses
+logic sp = 1'b1;
+logic [4:0] sp_duty_cycle = 8'd0;
+initial forever begin
+  if( sp_duty_cycle[4:0] == 0 ) begin
+    sp = 1'b1;
+    repeat( 10 ) @(posedge clk200);
+  end
+  sp = 1'b0;
+  repeat( 1 ) @(posedge clk200);
+  sp = 1'b1;
+  repeat( 1 ) @(posedge clk200);
+  sp = 1'b0;
+  repeat( sp_duty_cycle ) @(posedge clk200);
+  sp_duty_cycle[4:0] = sp_duty_cycle[4:0] + 1'b1; // overflow is expected here
+end
+
+
+// Module under test ===========================================================
+
+logic sp_d1;
+always_ff @(posedge clk200) begin
+  if( sp ) begin
+     sp_d1 <= 1'b0;
+  end else begin
+     sp_d1 <= 1'b1;
+  end
+end
+
+
+for(genvar i=0; i<16; i++) begin
+
+  delayed_event #(
+    .DELAY( i )
+  ) de (
+    .clk( clk200 ),
+    .nrst( ~sp ),  //|rnd_data[2:0] ),
+    .ena( 1'b1 ),  //sp_d1 ),
+
+    .on_event(  ),
+    .before_event(  ),
+    .after_event(  )
+  );
+end
+
+endmodule
+