ERROR: switch. on startup

[Ficus3]

Hello,
for each startup of HA, my both programs are unavailable.
My cards show fail with this message
ERROR: switch.irrigation_xxxx
Program: Not v2024.11 or newer irriation compoment

My solution is to reload the component on Parameters / Devices & Services / Irrigation controller / ...

Usualy, after that it's OK.

System Information

version	core-2025.7.3
installation_type	Home Assistant OS
dev	false
hassio	true
docker	true
container_arch	aarch64
user	root
virtualenv	false
python_version	3.13.3
os_name	Linux
os_version	6.12.25-haos-raspi
arch	aarch64
timezone	Europe/Paris
config_dir	/config

Home Assistant Community Store

GitHub API	ok
GitHub Content	ok
GitHub Web	ok
HACS Data	ok
GitHub API Calls Remaining	5000
Installed Version	2.0.5
Stage	running
Available Repositories	2114
Downloaded Repositories	12

Home Assistant Cloud

logged_in	false
can_reach_cert_server	ok
can_reach_cloud_auth	ok
can_reach_cloud	ok

Home Assistant Supervisor

host_os	Home Assistant OS 16.0
update_channel	stable
supervisor_version	supervisor-2025.07.1
agent_version	1.7.2
docker_version	28.3.0
disk_total	219.4 GB
disk_used	7.9 GB
healthy	true
supported	true
host_connectivity	true
supervisor_connectivity	true
ntp_synchronized	true
virtualization
board	rpi4-64
supervisor_api	ok
version_api	ok
installed_addons	Samba share (12.5.2), TasmoAdmin (0.32.0), Terminal & SSH (9.18.0), Duck DNS (1.19.0), File editor (5.8.0), ESPHome Device Builder (2025.7.3), Samba Backup (5.2.0), Mosquitto broker (6.5.1), InfluxDB (5.0.2), tydom2mqtt (3.5.3), SQLite Web (4.4.0)

Dashboards

dashboards	2
resources	10
views	8
mode	storage

Network Configuration

adapters	lo (disabled), end0 (enabled, default, auto), docker0 (disabled), hassio (disabled), vetheac53e6 (disabled), veth8cc6059 (disabled), vetha60fd28 (disabled), veth0bda5c4 (disabled), veth9bf0e7e (disabled), veth8a9e0dd (disabled), vethc6ce3cb (disabled), veth3296b12 (disabled), veth9dc8efc (disabled), veth84dcb6b (disabled), veth574b738 (disabled)
ipv4_addresses	lo (127.0.0.1/8), end0 (192.168.1.50/24), docker0 (172.30.232.1/23), hassio (172.30.32.1/23), vetheac53e6 (), veth8cc6059 (), vetha60fd28 (), veth0bda5c4 (), veth9bf0e7e (), veth8a9e0dd (), vethc6ce3cb (), veth3296b12 (), veth9dc8efc (), veth84dcb6b (), veth574b738 ()
ipv6_addresses	lo (::1/128), end0 (2a02:8428:14e2:9301:b8b:25b3:45db:fcba/64, fe80::d521:fcbf:7da5:a8c9/64), docker0 (fe80::8436:d8ff:fefe:6299/64), hassio (fe80::54f9:65ff:fe42:a77a/64), vetheac53e6 (fe80::bc0b:8cff:feca:878a/64), veth8cc6059 (fe80::c0e4:84ff:fec3:b8f3/64), vetha60fd28 (fe80::70b1:5dff:feeb:6a39/64), veth0bda5c4 (fe80::dca6:dfff:fecb:84c8/64), veth9bf0e7e (fe80::c05:4cff:fef5:e45a/64), veth8a9e0dd (fe80::d498:c9ff:fe53:5e0f/64), vethc6ce3cb (fe80::9c5f:48ff:fe59:2298/64), veth3296b12 (fe80::dc5f:afff:fe39:26e9/64), veth9dc8efc (fe80::e494:58ff:fe0c:5059/64), veth84dcb6b (fe80::f020:bcff:fe48:b514/64), veth574b738 (fe80::b8d4:13ff:fef5:e631/64)
announce_addresses	192.168.1.50, 2a02:8428:14e2:9301:b8b:25b3:45db:fcba, fe80::d521:fcbf:7da5:a8c9

Recorder

oldest_recorder_run	17 juillet 2025 à 18:04
current_recorder_run	28 juillet 2025 à 09:46
estimated_db_size	340.48 MiB
database_engine	sqlite
database_version	3.48.0

[petergridge]

Hi, Normally this will be fixed with a 'F5' refresh of the browser.

The alternative is to enable the generation of the equivalent yaml that can be applied in a manual card, this uses the standard entities card to build the interface.