Home

Belfry OpenScad Library Documentation

The library files are as follows:

Commonly Used

• transforms.scad: The most commonly used transformations, manipulations, and shortcuts are in this file.
• shapes.scad: Common useful shapes and structured objects.
• masks.scad: Shapes that are useful for masking with difference() and intersect().
• threading.scad: Modules to make triangular and trapezoidal threaded rods and nuts.
• paths.scad: Functions and modules to work with arbitrary 3D paths.
• beziers.scad: Functions and modules to work with bezier curves.

Standard Parts

• involute_gears.scad: Modules and functions to make involute gears and racks.
• joiners.scad: Modules to make joiner shapes for connecting separately printed objects.
• sliders.scad: Modules for creating simple sliders and rails.
• metric_screws.scad: Functions and modules to make metric screws, nuts, and screwholes.
• linear_bearings.scad: Modules to make mounts for LMxUU style linear bearings.
• nema_steppers.scad: Modules to make mounting holes for NEMA motors.
• phillips_drive.scad: Modules to create Phillips screwdriver tips.
• torx_drive.scad: Functions and Modules to create Torx bit drive holes.
• wiring.scad: Modules to render routed bundles of wires.

Miscellaneous

• math.scad: Useful helper functions.
• constants.scad: Useful constants for vectors, edges, etc.
• quaternions.scad: Functions to work with quaternion rotations.
• triangulation.scad: Functions to triangulate polyhedron() faces that have more than 3 vertices.
• debug.scad: Modules to help debug creation of beziers, polygons()s and polyhedron()s

Terminology

For purposes of these library files, the following terms apply:

• Left: Towards X-

• Right: Towards X+

• Front/Forward: Towards Y-

• Back/Behind: Towards Y+

• Bottom/Down/Below: Towards Z-

• Top/Up/Above: Towards Z+

• Axis-Positive: Towards the negative end of the axis the object is oriented on. IE: X-, Y-, or Z-.

• Axis-Negative: Towards the negative end of the axis the object is oriented on. IE: X-, Y-, or Z-.

Common Arguments:

Args	What it is
fillet	Radius of rounding for interior or exterior edges.
chamfer	Size of chamfers/bevels for interior or exterior edges.
orient	Axis a part should be oriented along. Given as an XYZ triplet of rotation angles. It is recommended that you use the ORIENT_ constants from constants.scad. Default is usually ORIENT_Z for vertical orientation.
align	Side of the origin that the part should be on. Given as a vector away from the origin. It is recommended that you use the V_ constants from constants.scad. Default is usually V_ZERO for centered.