Single phase meter Iskra 550 no power values

[HarryHase4]

nice work!
I'm using the binary on a wemos d1. I have some problems with my meter. The current is shown, the power not. Maybe it is a an effect from the single phase!?
Im'not a coder and i can not compile it myself, to much errors ;)

--
/ISK5\2M550E-1011

1-3:0.2.8(50)
0-0:1.0.0(230514205635S)
0-0:96.1.1(4530303333xxxx)
1-0:1.8.1(003198.294kWh)
1-0:1.8.2(002014.469kWh)
1-0:2.8.1(004659.584kWh)
1-0:2.8.2(010943.423kWh)
0-0:96.14.0(0001)
1-0:1.7.0(00.125kW)
1-0:2.7.0(00.000kW)
0-0:96.7.21(00010)
0-0:96.7.9(00006)
1-0:99.97.0(4)(0-0:96.7.19)(190111133452W)(0000002779s)(190307113415W)(0000004950s)(210727172710S)(0000003977s)(210727183630S)(0000001107s)
1-0:32.32.0(00093)
1-0:32.36.0(00008)
0-0:96.13.0()
1-0:32.7.0(232.8V)
1-0:31.7.0(000A)
1-0:21.7.0(00.122kW)
1-0:22.7.0(00.000kW)
0-1:24.1.0(003)
0-1:96.1.0(473030333235363xxxx)
0-1:24.2.1(230514205508S)(03187.803*m3)

[HarryHase4]

actuel data:

/ISK5\2M550E-1011

1-3:0.2.8(50)
0-0:1.0.0(230515135358S)
0-0:96.1.1(45303033333xxx)
1-0:1.8.1(003199.703*kWh)
1-0:1.8.2(002017.658*kWh)
1-0:2.8.1(004659.584*kWh)
1-0:2.8.2(010943.718*kWh)
0-0:96.14.0(0002)
1-0:1.7.0(00.000*kW)
1-0:2.7.0(00.270*kW)
0-0:96.7.21(00010)
0-0:96.7.9(00006)
1-0:99.97.0(4)(0-0:96.7.19)(190111133452W)(0000002779*s)(190307113415W)(0000004950*s)(210727172710S)(0000003977*s)(210727183630S)(0000001107*s)
1-0:32.32.0(00093)
1-0:32.36.0(00008)
0-0:96.13.0()
1-0:32.7.0(236.6*V)
1-0:31.7.0(001*A)
1-0:21.7.0(00.000*kW)
1-0:22.7.0(00.269*kW)
0-1:24.1.0(003)
0-1:96.1.0(47303033323xxx)
0-1:24.2.1(230515135002S)(03189.353*m3)
!642B
---
1-0:2.7.0(00.270*kW)
1-0:22.7.0(00.269*kW)

[HarryHase4]

I found an older fork, which i can compile, there i made a "ugly hack" in the decoder.

      if (strncmp(telegram, "1-0:2.7.0", strlen("1-0:2.7.0")) == 0)
      getValue(actualElectricityPowerReturned, telegram, len, '(', '*');

      if (strncmp(telegram, "1-0:22.7.0", strlen("1-0:22.7.0")) == 0)
      getValue(actualElectricityPowerReturned, telegram, len, '(', '*');

I don't understand why 1-0:2.7.0 is not working

[romix123]

I will fix this soonVerstuurd vanaf mijn iPadOp 15 mei 2023 om 16:03 heeft HarryHase4 ***@***.***> het volgende geschreven: I found an older fork, which i can compile, there i made a "ugly hack" in the decoder. if (strncmp(telegram, "1-0:2.7.0", strlen("1-0:2.7.0")) == 0) getValue(actualElectricityPowerReturned, telegram, len, '(', '*'); if (strncmp(telegram, "1-0:22.7.0", strlen("1-0:22.7.0")) == 0) getValue(actualElectricityPowerReturned, telegram, len, '(', '*'); I don't understand why 1-0:2.7.0 is not working —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[romix123]

The issue is that your meter terminates the values with the units (e.g. kWh) instead of with * followed by unit (eg *kWh). I will make a fix later this week

[HarryHase4]

The stars are in the telegram, the where killd by this editor here .. (my fault in posting it here .... sorry)

----

> 1-0:1.8.2(002020.371*kWh)
> 1-0:2.8.1(004659.584*kWh)
> 1-0:2.8.2(010954.312*kWh)
> 0-0:96.14.0(0002)
> 1-0:1.7.0(00.000*kW)
> 1-0:2.7.0(02.500*kW)
> 0-0:96.7.21(00010)
> 0-0:96.7.9(00006)
> 1-0:99.97.0(4)(0-0:96.7.19)(190111133452W)(0000002779*s)(190307113415W)(0000004950*s)(210727172710S)(0000003977*s)(210727183630S)(0000001107*s)
> 1-0:32.32.0(00093)
> 1-0:32.36.0(00008)
> 0-0:96.13.0()
> 1-0:32.7.0(242.8*V)
> 1-0:31.7.0(010*A)
> 1-0:21.7.0(00.000*kW)
> 1-0:22.7.0(02.499*kW)
> 0-1:24.1.0(003)
> 0-1:96.1.0(47303033xxxxxxx)
> 0-1:24.2.1(230516153505S)(03191.607*m3)
> !B572

[romix123]

Firmware P1WG2022v1.1be.NL.esp8285.bin should fix this issue

…

On 16 May 2023, at 15:42, HarryHase4 ***@***.***> wrote: sorry, i don't know from where i post the data before. if if now it is with * 1-0:1.8.2(002020.371kWh) 1-0:2.8.1(004659.584kWh) 1-0:2.8.2(010954.312kWh) 0-0:96.14.0(0002) 1-0:1.7.0(00.000kW) 1-0:2.7.0(02.500kW) 0-0:96.7.21(00010) 0-0:96.7.9(00006) 1-0:99.97.0(4)(0-0:96.7.19)(190111133452W)(0000002779s)(190307113415W)(0000004950s)(210727172710S)(0000003977s)(210727183630S)(0000001107s) 1-0:32.32.0(00093) 1-0:32.36.0(00008) 0-0:96.13.0() 1-0:32.7.0(242.8V) 1-0:31.7.0(010A) 1-0:21.7.0(00.000kW) 1-0:22.7.0(02.499kW) 0-1:24.1.0(003) 0-1:96.1.0(47303033xxxxxxx) 0-1:24.2.1(230516153505S)(03191.607m3) !B572 /Data /ISK5\2M550E-1011 1-3:0.2.8(50) 0-0:1.0.0(230516154119S) 0-0:96.1.1(45303033333030xxxxx) 1-0:1.8.1(003201.154kWh) 1-0:1.8.2(002020.371kWh) 1-0:2.8.1(004659.584kWh) 1-0:2.8.2(010954.421kWh) 0-0:96.14.0(0002) 1-0:1.7.0(00.000kW) 1-0:2.7.0(02.502kW) 0-0:96.7.21(00010) 0-0:96.7.9(00006) 1-0:99.97.0(4)(0-0:96.7.19)(190111133452W)(0000002779s)(190307113415W)(0000004950s)(210727172710S)(0000003977s)(210727183630S)(0000001107s) 1-0:32.32.0(00093) 1-0:32.36.0(00008) 0-0:96.13.0() 1-0:32.7.0(243.5V) 1-0:31.7.0(010A) 1-0:21.7.0(00.000kW) 1-0:22.7.0(02.505kW) 0-1:24.1.0(003) 0-1:96.1.0(473030xxxxxx) 0-1:24.2.1(230516154005S)(03191.607*m3) !E66A — Reply to this email directly, view it on GitHub <#5 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AANPIKRNSFG6CQ7RJCWHDQLXGN73DANCNFSM6AAAAAAYBH4LUI>. You are receiving this because you commented.

[HarryHase4]

can not find P1WG2022v1.1be.NL.esp8285.bin (and the code for it) ..

[romix123]

forgot to push
https://github.com/romix123/P1-wifi-gateway/tree/main/firmware

[HarryHase4]

Not fixes, the star is not the Problem, please See my comments bevor.
With the "ugly Hack" IT IS running. But i don't understand why?!

[romix123]

There is something weird with the ISKRA protocol. Will fix it later this week. Can you send me another dump of p1wifi.local/Raw and a screenshot?

…

On 20 May 2023, at 16:36, HarryHase4 ***@***.***> wrote: Not fixes, the star was mit the Problem, please See my comments. <https://user-images.githubusercontent.com/104375025/239693302-8bb4f01e-f253-4992-a44b-fdb38cce36ad.jpg> — Reply to this email directly, view it on GitHub <#5 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AANPIKSGUJM7PWT5G7237JLXHDJH3ANCNFSM6AAAAAAYBH4LUI>. You are receiving this because you commented.

[HarryHase4]

/ISK5\2M550E-1011 1-3:0.2.8(50) 0-0:1.0.0(230521133516S) 0-0:96.1.1(453030333330303638xxxxxx) 1-0:1.8.1(003211.396*kWh) 1-0:1.8.2(002025.059*kWh) 1-0:2.8.1(004697.961*kWh) 1-0:2.8.2(010993.348*kWh) 0-0:96.14.0(0001) 1-0:1.7.0(00.000*kW) 1-0:2.7.0(01.376*kW) 0-0:96.7.21(00010) 0-0:96.7.9(00006) 1-0:99.97.0(4)(0-0:96.7.19)(190111133452W)(0000002779*s)(190307113415W)(0000004950*s)(210727172710S)(0000003977*s)(210727183630S)(0000001107*s) 1-0:32.32.0(00094) 1-0:32.36.0(00008) 0-0:96.13.0() 1-0:32.7.0(241.8*V) 1-0:31.7.0(005*A) 1-0:21.7.0(00.000*kW) 1-0:22.7.0(01.364*kW) 0-1:24.1.0(003) 0-1:96.1.0(47303033323xxxxx) 0-1:24.2.1(230521133505S)(03199.256*m3) !1DC4

[romix123]

How about this

[HarryHase4]

no Actueel verbruik, but in the protocol it is

`1-0:2.7.0(01.376*kW)

1-0:22.7.0(01.364*kW)
`