A collection of cute breakout boards riding solderless breadboards, mostly for analog audio works
These PCB layouts and schematics are released under a Creative Commons cc-by-sa 3.0 license.
Original design by émilie gillet Design revisions by Gareth Johnson Converted to KiCad and further revision by Nathan Schenk
NOTE: This is a forked version of breadboard-friends and adds two addition BBFs, one using Thonkiconn 3.5mm Jacks (bbf-thonkjacks) and another providing eurorack header with polarity protection for providing eurorack power to your breadboard from euro bus (bbf-europower). NOTE: This version converts the project from Eagle to KiCad and footprint updates to jacks, including oval holes
BBF-EUROPOWER Bill Of Materials (BOM)
- 2x 200ma PTC Poly Fuse or equivalent (or jumper wires if no fuse is required);
- 2x 10uF 25V Electrolytic Caps;
- 2x 1N5818 diodes or equivalent;
- 2x Ferrite Beads;
- 4x 10 Pin DIL male headers.
BBF-THONKJACKS Bill Of Materials (BOM)
- 4x Thonkiconn Jacks;
- 1x 8 pin SIL female header;
- 2x 10 pin DIL male headers.