Skip to content

Latest commit

 

History

History
66 lines (52 loc) · 1.52 KB

stm32-programmer.md

File metadata and controls

66 lines (52 loc) · 1.52 KB
Raw

STM32 Programmer

On WSL

Download en.stm32cubeprg-lin-v2-14-0.zip

# cd ~/
# wget https://www.st.com/content/ccc/resource/technical/software/utility/group0/06/ed/fd/c3/aa/6c/41/14/stm32cubeprg-lin-v2-14-0/files/stm32cubeprg-lin-v2-14-0.zip/jcr:content/translations/en.stm32cubeprg-lin-v2-14-0.zip

Install CubeProgrammer in default path

# unzip ~/en.stm32cubeprg-lin-v2-14-0.zip
# chmod +x  SetupSTM32CubeProgrammer-2.14.0.linux
# ./SetupSTM32CubeProgrammer-2.14.0.linux

Note

Keep in mind that is GUI installer so you need a X server on Windows if you work in WSL.

Getting started with Nucleo F303K8

On Windows

Attach Programmer via USBIPd to WSL:

# usbipd bind --force --hardware-id 0483:374b
# usbipd wsl attach  --hardware-id 0483:374b --auto-attach

Note

Nucleo F303K8 Debug Probe is reported by system as device with hardware ID 0483:374b.

Test building

Default overlay in Zephyr for Nucleo F303K8 uses wrong pin (P15) which do not exists. We have to change it to other. So, create <ZEPHYR_DIR>/samples/drivers/uart/echo_bot/app.overlay with content:

/ {
	chosen {
		zephyr,console = &usart2;
	};
};

&usart2 {
	pinctrl-0 = <&usart2_tx_pb3 &usart2_rx_pb4>;
	pinctrl-names = "default";
	current-speed = <115200>;
	status = "okay";
};

Compile it

# west build -d ~/build -b nucleo_f303k8  <ZEPHYR_DIR>/samples/drivers/uart/echo_bot/

Flash

# west flash

Connect to UART via pins D13/D12

Remove <ZEPHYR_DIR>/samples/drivers/uart/echo_bot/app.overlay