Trying to access the new EDID editor in the update

[Celeths]

The latest update mentions

Added an EDID editor in the terminal with a built-in 1080P EDID template

But I have no clue how to access this. So far I can’t find any documentation.

[PenguinOhGreat]

Same

[Zepan]

Hi, it is updated, but CDN have some delay, here is the wiki update: https://github.com/sipeed/sipeed_wiki/blob/main/docs/hardware/en/kvm/NanoKVM_Pro/extended.md#how-to-retrieve-display-edid

[benbaker76]

I applied the PiKVM v4 EDID to the NanoKVM using this:

# Convert hex to bin and copy to NanoKVM via ssh
xxd -r -p v4plus.hex edid-v4.bin
scp ./edid-v4.bin root@192.168.1.42:/root

Then on the NanoKVM:

~ # /kvmapp/system/tool/nanokvm_update_edid /root/edid-v4.bin
Chip Version: LT6911UXC
Product Version: CUBE_B

=========================================================
Incorrect EDID may cause issues such as 
inability to display images, please modify with caution
=========================================================


==========================================================
⚠️  WARNING: Hardware version detected as Cube/Lite!
==========================================================
After flashing, you MUST manually power cycle the device!
Please ensure you can physically disconnect its power,
NOT just remotely reboot it!!
==========================================================

Do you want to continue? (Y/N): 
y
EDID data loaded successfully from /root/edid-v4.bin
Writing EDID....
EDID write completed
Reading EDID...
EDID data verified successfully

=========================================================
✅  EDID update successful!
Please manually power cycle the device to apply changes.
=========================================================

To restore the original:

~ # /kvmapp/system/tool/nanokvm_update_edid /kvmapp/system/tool/E21_NanoKVM.bin

edid-v4.zip