"show mac" not showing all addresses

[brianmarcotte]

"show mac" / "fdbshow" is not returning all addresses on Dell S5248F-ON (broadcom Trident 3).

What I get (somewhat redacted):

 No.    Vlan  MacAddress         Port        Type
----  ------  -----------------  ----------  -------
   1       8  XX:01:XX:XX:XX:26  Ethernet47  Dynamic
   2       8  XX:XX:20:55:70:XX  Ethernet47  Dynamic
   3      13  XX:XX:61:XX:00:00  Ethernet47  Dynamic
   4      16  XX:XX:XX:XX:XX:09  Ethernet47  Dynamic
   5      17  XX:XX:31:00:00:00  Ethernet47  Dynamic
   6      17  XX:02:XX:XX:XX:22  Ethernet47  Dynamic
   7      17  XX:XX:32:00:00:00  Ethernet47  Dynamic
   8      17  XX:XX:36:XX:XX:XX  Ethernet47  Dynamic
   9      19  XX:XX:XX:38:94:65  Ethernet47  Dynamic
  10      51  XX:XX:XX:38:94:65  Ethernet47  Dynamic
  11      52  XX:XX:XX:38:94:65  Ethernet47  Dynamic

It's showing addresses only for Ethernet47. It should be showing addresses on another 5 ports including the uplink on port Ethernet5.

This is with the latest "master", as of this writing. I also tried "202505".

We're using only L2 features. Config file and "show version" attached.

Thanks.

• Brian

config_db.json

show-version.txt

[brianmarcotte]

The command works properly right after a reboot. It returns the truncated output starting when the console prints "System is ready".