qemu-check.exp

#!/usr/bin/expect -f
#
# This scripts starts QEMU, loads and boots Linux/OP-TEE, then runs
# tests in the guest. The return code is 0 for success, >0 for error.
#
# Options:
#   -q        Suppress output to stdout (quiet)
#   --tests   Type of tests to run, values: all, xtest and trusted-keys
#   --timeout Timeout for each test (sub)case, in seconds [480]
#   --xtest-args Optional arguments to xtest

set bios "../out/bios-qemu/bios.bin"
set cmd1 "cd /mnt/host/build/qemu_v8/xen"
if {[info exists ::env(XEN_FFA)] && $::env(XEN_FFA) == "y"} {
	set cmd2 "xl create guest_ffa.cfg"
} else {
	set cmd2 "xl create guest.cfg"
}
set cmd3 "xl console domu"
set quiet 0
set xtest_args ""
if {[info exists ::env(RUST_ENABLE)] && $::env(RUST_ENABLE) == "y"} {
	set rust_enable 1
} else {
	set rust_enable 0
}

# The time required to run some tests (e.g., key generation tests [4007.*])
# can be significant and vary widely -- typically, from about one minute to
# several minutes depending on the host machine.
# The value here should be sufficient to run the whole optee_test suite
# ('xtest') with all testsuites enabled (regression+gp+pkcs11).
set timeout 900
set tests "all"
set basedir [file dirname $argv0]

# Parse command line
set myargs $argv
while {[llength $myargs]} {
	set myargs [lassign $myargs arg]
	switch -exact -- $arg {
		"--tests"	{set myargs [lassign $myargs ::tests]}
		"--timeout"	{set myargs [lassign $myargs ::timeout]}
		"-q"		{set ::quiet 1}
		"--xtest-args"  {set myargs [lassign $myargs ::xtest_args]}
	}
}

set cmd "xtest $xtest_args"

proc info arg {
	if {$::quiet==1} { return }
	puts -nonewline $arg
	flush stdout
}

proc check_test_result arg {
	set casenum "none"
	expect {
		# Exit with error status as soon as a test fails
		-re {  ([^ ]+) FAIL} {
			info " $expect_out(1,string) FAIL\n"
			exit 1
		}
		-re {rcu.*detected stalls} {
			info " Kernel error: '$expect_out(0,string)'\n"
			exit 1
		}
		# Crude progress indicator: print one # when each test [sub]case starts
		-re {([\*o]) ([^ ]+) } {
			set casenum $expect_out(2,string)
			if {$expect_out(1,string) == "o"} {
				if {$star == 1} {
					# Do not count first subcase ('o') since start
					# of test ('*') was counted already
					set star 0
					exp_continue
				}
			} else {
				set star 1
			}
			info "#"
			incr ncases
			if {$ncases % 50 == 0} { info "\n" }
			exp_continue
		}
		# Exit when result separator is seen
		"+-----------------------------------------------------\r\r" {}
		# Handle errors in TEE core output
		-i $arg -re {(..TC:[^\n]*assertion[^\n]*failed at[^\n]*)} {
			info "!!! $expect_out(1,string)\n"
			exit 1
		}
		-i $arg -re {(..TC:[^\n]*Panic at[^\n]*)} {
			info "!!! $expect_out(1,string)\n"
			exit 1
		}
		timeout {
			info "!!! Timeout\n"
			info "TIMEOUT - test case too long or hung? (last test started: $casenum)\n"
			exit 2
		}
	}
	info "\nStatus: PASS ($ncases test cases)\n"
}

# Disable echoing of guest output
log_user 0
# Save guest console output to a file
log_file -a -noappend "serial0.log"
info "Starting QEMU..."
open "serial1.log" "w+"
spawn -open [open "|tail -f serial1.log"]
set teecore $spawn_id
spawn sh -c "$::env(QEMU) $::env(QEMU_CHECK_ARGS)"
expect {
	"Kernel panic" {
		info "!!! Kernel panic\n"
		exit 1
	}
	timeout {
		info "!!! Timeout\n"
		exit 1
	}
	"ogin:"
}
send -- "root\r\r"
expect "# "
info " done, guest is booted"
if {$::env(XEN_BOOT) == "y"} {
        info " (Xen Dom0)"
}
info ".\n"
# Toolchain libraries might be here or there
send -- "export LD_LIBRARY_PATH=/lib:/lib/arm-linux-gnueabihf\r"
if {$tests == "all" || $tests == "xtest"} {
	info "Running: $cmd...\n"
	expect "# "
	send -- "$cmd\r"
	check_test_result $teecore
}
if {$::env(XEN_BOOT) == "y"} {
	info " Booting DomU.\n"
	expect "# "
	info "Running: $cmd1...\n"
	send -- "$cmd1\r"
	expect "# "
	info "Running: $cmd2...\n"
	send -- "$cmd2\r"
	expect "# "
	info "Running: $cmd3...\n"
	send -- "$cmd3\r"
	expect {
		"Kernel panic" {
			info "!!! Kernel panic\n"
			exit 1
		}
		timeout {
			info "!!! Timeout\n"
			exit 1
		}
		"login:"
	}
	send -- "root\r\r"
	expect "# "
	info " done, DomU is booted.\n"
	# Toolchain libraries might be here or there
	send -- "export LD_LIBRARY_PATH=/lib:/lib/arm-linux-gnueabihf\r"
	expect "# "
	if {$tests == "all" || $tests == "xtest"} {
		info "Running: $cmd...\n"
		send -- "$cmd\r"
		check_test_result $teecore
	}
}
if {$tests == "all" || $tests == "trusted-keys"} {
	# Invoke Trusted Keys tests
	source $basedir/trusted-keys.exp
}
if {($tests == "all" || $tests == "rust") && $::rust_enable == 1} {
	# Invoke Rust tests
	source $basedir/rust.exp
}