Disable Touch?

[Taroc22]

First of all i want to thank you for putting in all this work to build something like this. It is exactly what i need for my project :P

I do not want to use the touch feature of my motorfaders for various reasons. Is it possible to disable touch and just hook the corresponding pins up to ground or are there other workarounds?
In the worst case I am not shy of rewriting all routines corresponding to touch but maybe you can let me know if theres an easier way to disable it :)

Best Regards

[tttapa]

You can disable touch sensitivity for some or all of the faders by setting the corresponding touch_masks to zero in the config:

Control-Surface-Motor-Fader/Motor-Controller/main.cpp

Lines 146 to 148 in fe8a54f

	// Bit masks of the touch pins (must be on port B):
	static constexpr uint8_t touch_masks[] = {1 << PB0, 1 << PB1, 1 << PB2,
	1 << PB4};

If you want to rip out all the touch-related code, that should be fairly straightforward as well: just Ctrl+F for touch in https://github.com/tttapa/Control-Surface-Motor-Fader/blob/fe8a54f912ea0bac2d75647e6f40e23807e00823/Motor-Controller/main.cpp and remove the appropriate lines.

[Taroc22]

Thank you for your fast and helpful reply!

I guess the problem you mentioned in this issue does no longer exist regarding that function ?