Just installed, missing old original HA sensors

[wpee]

HI
I just installed the add_on

I miss some original sensors like:
sensor.envoy_xxx_current_power_production
sensor.envoy_xxx_current_power_consumption
sensor.envoy_xxx_current_net_power_consumption
etc

Shouldn't these be available or am I missing something / wrong configured? I see the in the README.md mentioned.

gr Wim

[vincentwolsink]

Hi Wim, those should be available. Do you see any errors related to this integration in the logs?

[wpee]

Several errors, this is the most prcize I guess. Any tips??? Reinstall???, first attempt a reinstall was neccesary to get it working (first attempt failed also) ,_------------------- This error originated from a custom integration. Logger: custom_components.enphase_envoy.envoy_reader Source: custom_components/enphase_envoy/envoy_reader.py:1177 integration: Enphase Envoy (Installer) (documentation, issues) First occurred: 12:57:31 PM (2316 occurrences) Last logged: 11:18:17 PM Unable to execute callback: No entity id specified for entity Envoy xxxxxxxxxxxxx Power Production L1 Realtime data error: No entity id specified for entity Envoy xxxxxxxxxxxxz Power Production L1 Traceback (most recent call last): File "/config/custom_components/enphase_envoy/envoy_reader.py", line 1177, in stream_reader meter_callback(StreamData(reading)) ~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^ File "/usr/src/homeassistant/homeassistant/util/__init__.py", line 184, in wrapper result = method(*args, **kwargs) File "/config/custom_components/enphase_envoy/__init__.py", line 222, in update_production_meters live_entities[key].async_write_ha_state() ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^ File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 1016, in async_write_ha_state self._async_verify_state_writable() ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^ File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 999, in _async_verify_state_writable raise NoEntitySpecifiedError( f"No entity id specified for entity {self.name}" ) homeassistant.exceptions.NoEntitySpecifiedError: No entity id specified for entity Envoy xxxxxxxxxx Power Production L1 Met vriendelijke groet, Wim Peeters

…

________________________________ Van: Vincent Wolsink ***@***.***> Verzonden: zondag 25 mei 2025 18:56 Aan: vincentwolsink/home_assistant_enphase_envoy_installer ***@***.***> CC: wpee ***@***.***>; Author ***@***.***> Onderwerp: Re: [vincentwolsink/home_assistant_enphase_envoy_installer] Just installed, missing old original HA sensors (Issue #226) [https://avatars.githubusercontent.com/u/1639734?s=20&v=4]vincentwolsink left a comment (vincentwolsink/home_assistant_enphase_envoy_installer#226)<#226 (comment)> Hi Wim, those should be available. Do you see any errors related to this integration in the logs? — Reply to this email directly, view it on GitHub<#226 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ACAQL22AD2OVAOGCFRSDAX33AHY2NAVCNFSM6AAAAAB53UAVDKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDSMBXHE2DEMZZGU>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[vincentwolsink]

Did you enable realtime readings? Do you have an Envoy metered with all CTs correctly installed?
I would try not enabling realtime readings at first.

[wpee]

I tried enable and disabling the realtime readings, both time i did a restart of HA, no current production number as explained, the only visible entity at the envoy itself is the PRODUCTION SWITCH.
I have an envoy metered and I configured the CT's right I used the standards ENPHASE INTEGRATION but now I wanted to prepare on the ON/OFF switching and for future use the ZERO PRODUCTION limiting (or maybe any-number limiting)
Realtime readings I did enable en rebooted HA. but in the ENTITIES of the ENVOY I only see the switch.

At the original HA interface I see the current consumption / production etc, I even put them in a screen so I have them visible.
What next? I just want to test till it is there..... must be possible...

[vincentwolsink]

Can you maybe enable debug logging and send me the output after reloading the integration?

You can mail it to (temporary e-mail) ziener06joduur@icloud.com

[vincentwolsink]

Thanks for sending the logs. It seems an issue with IPv6 connectivity. Manually re-configuring with the correct ip address (like you did) fixes the issue for now. I need to look into a proper fix.