Battery control

[minggaard]

Describe the feature
Can see in the Enphase "app" that it should be possible to change behaviors of:
Charge battery from the grid (this is not new, but changed, maybe)
Discharge battery to the grip
Restrict battery discharge

all seems to require a time-schedule to be defined.

Would this be possible to get here ?
What could I supply to assist ?

Account type

• Installer
• DIY / DHZ
• [x ] Home Owner (This integration is not (fully) functional with a home owner account!)

Envoy

• [x ] Metered with CTs installed

• Metered without CTs

• Standard

• FW version: D8.3.5167

• Amount of micro inverters connected: 36

Home Assistant

• Version: 2025.11.3

[vincentwolsink]

Hi @minggaard could you maybe supply me with some screenshots from the app?

[minggaard]

Hi Vincent. They can be found in Menu - Settings - Battery. Currently using 2 of the 3 options (no spare power in the batteries to discard to grid) The schedule are mandatory and must be set before it can be enabled. [image: Screenshot from 2025-11-29 15-28-29.png] <img width="1412" height="921" alt="Image" src="https://github.com/user-attachments/assets/c8ef59b5-bc8d-40de-9551-64c2b009820a" /> Example of setting up "Charge from grid" (same for "Restrict battery discard") [image: Screenshot from 2025-11-29 15-38-36.png] <img width="1412" height="921" alt="Image" src="https://github.com/user-attachments/assets/c71c1620-257a-446f-a6b3-ba871a6856eb" /> Top right corner move slider to Enable and then this popup shows. Marke check box and Confirm [image: Screenshot from 2025-11-29 15-45-07.png] <img width="1412" height="921" alt="Image" src="https://github.com/user-attachments/assets/dec437ba-86cd-4c53-8379-840774e0a484" /> The schedule must be set The presse Proceed [image: Screenshot from 2025-11-29 15-45-30.png] <img width="1412" height="921" alt="Image" src="https://github.com/user-attachments/assets/8a27e9e5-d3eb-49bd-9131-24802c448bd4" /> To actually enable the new settings press Apply and hopefully it returns as Enabled. PS. the shutdown % can't be changed any more its 5%. Regards Flemming

…

On Fri, Nov 28, 2025 at 9:03 AM Vincent Wolsink ***@***.***> wrote: *vincentwolsink* left a comment (vincentwolsink/home_assistant_enphase_envoy_installer#244) <#244 (comment)> Hi @minggaard <https://github.com/minggaard> could you maybe supply me with some screenshots from the app? — Reply to this email directly, view it on GitHub <#244 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AFZQWNMNIEPXAWYN4XNV3WD3676VTAVCNFSM6AAAAACNFRI4J6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTKOBYGMYDAOBSGY> . You are receiving this because you were mentioned.Message ID: <vincentwolsink/home_assistant_enphase_envoy_installer/issues/244/3588300826 @github.com>

[minggaard]

Ehh did the screenshots got removed in the email
or are they stored somewhere else ?

[vincentwolsink]

Github does not support embedding images via e-mail. You would need to upload them here directly.

[minggaard]

Hope you can see them now.