.golangci.next.reference.yml

# This file contains all available configuration options
# with their default values (in comments).
#
# This file is not a configuration example,
# it contains the exhaustive configuration with explanations of the options.

linters:
  # Disable all linters.
  # Default: false
  disable-all: true
  # Enable specific linter
  # https://golangci-lint.run/usage/linters/#enabled-by-default
  enable:
    - asasalint
    - asciicheck
    - bidichk
    - bodyclose
    - canonicalheader
    - containedctx
    - contextcheck
    - copyloopvar
    - cyclop
    - decorder
    - depguard
    - dogsled
    - dupl
    - dupword
    - durationcheck
    - err113
    - errcheck
    - errchkjson
    - errname
    - errorlint
    - execinquery
    - exhaustive
    - exhaustruct
    - exportloopref
    - fatcontext
    - filen
    - forbidigo
    - forcetypeassert
    - funlen
    - gci
    - ginkgolinter
    - gocheckcompilerdirectives
    - gochecknoglobals
    - gochecknoinits
    - gochecksumtype
    - gocognit
    - goconst
    - gocritic
    - gocyclo
    - godot
    - godox
    - gofmt
    - gofumpt
    - goheader
    - goimports
    - gomoddirectives
    - gomodguard
    - goprintffuncname
    - gosec
    - gosimple
    - gosmopolitan
    - govet
    - grouper
    - iface
    - importas
    - inamedparam
    - ineffassign
    - interfacebloat
    - intrange
    - ireturn
    - lll
    - loggercheck
    - maintidx
    - makezero
    - mirror
    - misspell
    - mnd
    - musttag
    - nakedret
    - nestif
    - nilerr
    - nilnil
    - nlreturn
    - noctx
    - nolintlint
    - nonamedreturns
    - nosprintfhostport
    - paralleltest
    - perfsprint
    - prealloc
    - predeclared
    - promlinter
    - protogetter
    - reassign
    - recvcheck
    - revive
    - rowserrcheck
    - sloglint
    - spancheck
    - sqlclosecheck
    - staticcheck
    - stylecheck
    - tagalign
    - tagliatelle
    - tenv
    - testableexamples
    - testifylint
    - testpackage
    - thelper
    - tparallel
    - unconvert
    - unparam
    - unused
    - usestdlibvars
    - varnamelen
    - wastedassign
    - whitespace
    - wrapcheck
    - wsl
    - zerologlint

  # Enable all available linters.
  # Default: false
  enable-all: true
  # Disable specific linter
  # https://golangci-lint.run/usage/linters/#disabled-by-default
  disable:
    - asasalint
    - asciicheck
    - bidichk
    - bodyclose
    - canonicalheader
    - containedctx
    - contextcheck
    - copyloopvar
    - cyclop
    - decorder
    - depguard
    - dogsled
    - dupl
    - dupword
    - durationcheck
    - err113
    - errcheck
    - errchkjson
    - errname
    - errorlint
    - execinquery
    - exhaustive
    - exhaustruct
    - exportloopref
    - fatcontext
    - filen
    - forbidigo
    - forcetypeassert
    - funlen
    - gci
    - ginkgolinter
    - gocheckcompilerdirectives
    - gochecknoglobals
    - gochecknoinits
    - gochecksumtype
    - gocognit
    - goconst
    - gocritic
    - gocyclo
    - godot
    - godox
    - gofmt
    - gofumpt
    - goheader
    - goimports
    - gomoddirectives
    - gomodguard
    - goprintffuncname
    - gosec
    - gosimple
    - gosmopolitan
    - govet
    - grouper
    - ifcae
    - importas
    - inamedparam
    - ineffassign
    - interfacebloat
    - intrange
    - ireturn
    - lll
    - loggercheck
    - maintidx
    - makezero
    - mirror
    - misspell
    - mnd
    - musttag
    - nakedret
    - nestif
    - nilerr
    - nilnil
    - nlreturn
    - noctx
    - nolintlint
    - nonamedreturns
    - nosprintfhostport
    - paralleltest
    - perfsprint
    - prealloc
    - predeclared
    - promlinter
    - protogetter
    - reassign
    - recvcheck
    - revive
    - rowserrcheck
    - sloglint
    - spancheck
    - sqlclosecheck
    - staticcheck
    - stylecheck
    - tagalign
    - tagliatelle
    - tenv
    - testableexamples
    - testifylint
    - testpackage
    - thelper
    - tparallel
    - unconvert
    - unparam
    - unused
    - usestdlibvars
    - varnamelen
    - wastedassign
    - whitespace
    - wrapcheck
    - wsl
    - zerologlint
    - deadcode # Deprecated
    - exhaustivestruct # Deprecated
    - golint # Deprecated
    - ifshort # Deprecated
    - interfacer # Deprecated
    - maligned # Deprecated
    - gomnd # Deprecated
    - nosnakecase # Deprecated
    - scopelint # Deprecated
    - structcheck # Deprecated
    - varcheck # Deprecated

  # Enable presets.
  # https://golangci-lint.run/usage/linters
  # Default: []
  presets:
    - bugs
    - comment
    - complexity
    - error
    - format
    - import
    - metalinter
    - module
    - performance
    - sql
    - style
    - test
    - unused

  # Enable only fast linters from enabled linters set (first run won't be fast)
  # Default: false
  fast: true


# All available settings of specific linters.
linters-settings:
  asasalint:
    # To specify a set of function names to exclude.
    # The values are merged with the builtin exclusions.
    # The builtin exclusions can be disabled by setting `use-builtin-exclusions` to `false`.
    # Default: ["^(fmt|log|logger|t|)\.(Print|Fprint|Sprint|Fatal|Panic|Error|Warn|Warning|Info|Debug|Log)(|f|ln)$"]
    exclude:
      - Append
      - \.Wrapf
    # To enable/disable the asasalint builtin exclusions of function names.
    # See the default value of `exclude` to get the builtin exclusions.
    # Default: true
    use-builtin-exclusions: false
    # Ignore *_test.go files.
    # Default: false
    ignore-test: true

  bidichk:
    # The following configurations check for all mentioned invisible Unicode runes.
    # All runes are enabled by default.
    left-to-right-embedding: false
    right-to-left-embedding: false
    pop-directional-formatting: false
    left-to-right-override: false
    right-to-left-override: false
    left-to-right-isolate: false
    right-to-left-isolate: false
    first-strong-isolate: false
    pop-directional-isolate: false

  copyloopvar:
    # Check all assigning the loop variable to another variable.
    # Default: false
    check-alias: true

  cyclop:
    # The maximal code complexity to report.
    # Default: 10
    max-complexity: 10
    # The maximal average package complexity.
    # If it's higher than 0.0 (float) the check is enabled
    # Default: 0.0
    package-average: 0.5
    # Should ignore tests.
    # Default: false
    skip-tests: true

  decorder:
    # Required order of `type`, `const`, `var` and `func` declarations inside a file.
    # Default: types before constants before variables before functions.
    dec-order:
      - type
      - const
      - var
      - func

    # If true, underscore vars (vars with "_" as the name) will be ignored at all checks
    # Default: false (underscore vars are not ignored)
    ignore-underscore-vars: false

    # If true, order of declarations is not checked at all.
    # Default: true (disabled)
    disable-dec-order-check: false

    # If true, `init` func can be anywhere in file (does not have to be declared before all other functions).
    # Default: true (disabled)
    disable-init-func-first-check: false

    # If true, multiple global `type`, `const` and `var` declarations are allowed.
    # Default: true (disabled)
    disable-dec-num-check: false

    # If true, type declarations will be ignored for dec num check
    # Default: false (type statements are not ignored)
    disable-type-dec-num-check: false

    # If true, const declarations will be ignored for dec num check
    # Default: false (const statements are not ignored)
    disable-const-dec-num-check: false

    # If true, var declarations will be ignored for dec num check
    # Default: false (var statements are not ignored)
    disable-var-dec-num-check: false

  depguard:
    # Rules to apply.
    #
    # Variables:
    # - File Variables
    #   you can still use and exclamation mark ! in front of a variable to say not to use it.
    #   Example !$test will match any file that is not a go test file.
    #
    #   `$all` - matches all go files
    #   `$test` - matches all go test files
    #
    # - Package Variables
    #
    #  `$gostd` - matches all of go's standard library (Pulled from `GOROOT`)
    #
    # Default: Only allow $gostd in all files.
    rules:
      # Name of a rule.
      main:
        # Used to determine the package matching priority.
        # There are three different modes: `original`, `strict`, and `lax`.
        # Default: "original"
        list-mode: lax
        # List of file globs that will match this list of settings to compare against.
        # Default: $all
        files:
          - "!**/*_a _file.go"
        # List of allowed packages.
        allow:
          - $gostd
          - github.com/OpenPeeDeeP
        # Packages that are not allowed where the value is a suggestion.
        deny:
          - pkg: "github.com/sirupsen/logrus"
            desc: not allowed
          - pkg: "github.com/pkg/errors"
            desc: Should be replaced by standard lib errors package

  dogsled:
    # Checks assignments with too many blank identifiers.
    # Default: 2
    max-blank-identifiers: 3

  dupl:
    # Tokens count to trigger issue.
    # Default: 150
    threshold: 100

  dupword:
    # Keywords for detecting duplicate words.
    # If this list is not empty, only the words defined in this list will be detected.
    # Default: []
    keywords:
      - "the"
      - "and"
      - "a"
    # Keywords used to ignore detection.
    # Default: []
    ignore:
      - "0C0C"

  errcheck:
    # Report about not checking of errors in type assertions: `a := b.(MyStruct)`.
    # Such cases aren't reported by default.
    # Default: false
    check-type-assertions: true

    # report about assignment of errors to blank identifier: `num, _ := strconv.Atoi(numStr)`.
    # Such cases aren't reported by default.
    # Default: false
    check-blank: true

    # To disable the errcheck built-in exclude list.
    # See `-excludeonly` option in https://github.com/kisielk/errcheck#excluding-functions for details.
    # Default: false
    disable-default-exclusions: true

    # List of functions to exclude from checking, where each entry is a single function to exclude.
    # See https://github.com/kisielk/errcheck#excluding-functions for details.
    exclude-functions:
      - io/ioutil.ReadFile
      - io.Copy(*bytes.Buffer)
      - io.Copy(os.Stdout)

  errchkjson:
    # With check-error-free-encoding set to true, errchkjson does warn about errors
    # from json encoding functions that are safe to be ignored,
    # because they are not possible to happen.
    #
    # if check-error-free-encoding is set to true and errcheck linter is enabled,
    # it is recommended to add the following exceptions to prevent from false positives:
    #
    #     linters-settings:
    #       errcheck:
    #         exclude-functions:
    #           - encoding/json.Marshal
    #           - encoding/json.MarshalIndent
    #
    # Default: false
    check-error-free-encoding: true

    # Issue on struct encoding that doesn't have exported fields.
    # Default: false
    report-no-exported: false

  errorlint:
    # Check whether fmt.Errorf uses the %w verb for formatting errors.
    # See the https://github.com/polyfloyd/go-errorlint for caveats.
    # Default: true
    errorf: false
    # Permit more than 1 %w verb, valid per Go 1.20 (Requires errorf:true)
    # Default: true
    errorf-multi: false
    # Check for plain type assertions and type switches.
    # Default: true
    asserts: false
    # Check for plain error comparisons.
    # Default: true
    comparison: false
    # Allowed errors.
    # Default: []
    allowed-errors:
      - err: "io.EOF"
        fun: "example.com/pkg.Read"
    # Allowed error "wildcards".
    # Default: []
    allowed-errors-wildcard:
      - err: "example.com/pkg.ErrMagic"
        fun: "example.com/pkg.Magic"

  exhaustive:
    # Program elements to check for exhaustiveness.
    # Default: [ switch ]
    check:
      - switch
      - map
    # Check switch statements in generated files also.
    # Default: false
    check-generated: true
    # Presence of "default" case in switch statements satisfies exhaustiveness,
    # even if all enum members are not listed.
    # Default: false
    default-signifies-exhaustive: true
    # Enum members matching the supplied regex do not have to be listed in
    # switch statements to satisfy exhaustiveness.
    # Default: ""
    ignore-enum-members: "Example.+"
    # Enum types matching the supplied regex do not have to be listed in
    # switch statements to satisfy exhaustiveness.
    # Default: ""
    ignore-enum-types: "Example.+"
    # Consider enums only in package scopes, not in inner scopes.
    # Default: false
    package-scope-only: true
    # Only run exhaustive check on switches with "//exhaustive:enforce" comment.
    # Default: false
    explicit-exhaustive-switch: true
    # Only run exhaustive check on map literals with "//exhaustive:enforce" comment.
    # Default: false
    explicit-exhaustive-map: true
    # Switch statement requires default case even if exhaustive.
    # Default: false
    default-case-required: true

  exhaustruct:
    # List of regular expressions to match struct packages and their names.
    # Regular expressions must match complete canonical struct package/name/structname.
    # If this list is empty, all structs are tested.
    # Default: []
    include:
      - '.+\.Test'
      - 'example\.com/package\.ExampleStruct[\d]{1,2}'
    # List of regular expressions to exclude struct packages and their names from checks.
    # Regular expressions must match complete canonical struct package/name/structname.
    # Default: []
    exclude:
      - '.+/cobra\.Command$'

  filen:
    # Ignore comments when counting lines.
    # Default false
    ignore-comments: true
    # Max number of lines in a file.
    # Default: 1000
    max-lines: 500
    # Min number of lines in a file.
    # Default: 5
    min-lines: 1

  forbidigo:
    # Forbid the following identifiers (list of regexp).
    # Default: ["^(fmt\\.Print(|f|ln)|print|println)$"]
    forbid:
      # Builtin function:
      - ^print.*$
      # Optional message that gets included in error reports.
      - p: ^fmt\.Print.*$
        msg: Do not commit print statements.
      # Alternatively, put messages at the end of the regex, surrounded by `(# )?`
      # Escape any special characters. Those messages get included in error reports.
      - 'fmt\.Print.*(# Do not commit print statements\.)?'
      # Forbid spew Dump, whether it is called as function or method.
      # Depends on analyze-types below.
      - ^spew\.(ConfigState\.)?Dump$
      # The package name might be ambiguous.
      # The full import path can be used as additional criteria.
      # Depends on analyze-types below.
      - p: ^v1.Dump$
        pkg: ^example.com/pkg/api/v1$
    # Exclude godoc examples from forbidigo checks.
    # Default: true
    exclude-godoc-examples: false
    # Instead of matching the literal source code,
    # use type information to replace expressions with strings that contain the package name
    # and (for methods and fields) the type name.
    # This makes it possible to handle import renaming and forbid struct fields and methods.
    # Default: false
    analyze-types: true

  funlen:
    # Checks the number of lines in a function.
    # If lower than 0, disable the check.
    # Default: 60
    lines: -1
    # Checks the number of statements in a function.
    # If lower than 0, disable the check.
    # Default: 40
    statements: -1
    # Ignore comments when counting lines.
    # Default false
    ignore-comments: true

  gci:
    # Section configuration to compare against.
    # Section names are case-insensitive and may contain parameters in ().
    # The default order of sections is `standard > default > custom > blank > dot > alias > localmodule`,
    # If `custom-order` is `true`, it follows the order of `sections` option.
    # Default: ["standard", "default"]
    sections:
      - standard                       # Standard section: captures all standard packages.
      - default                        # Default section: contains all imports that could not be matched to another section type.
      - prefix(github.com/org/project) # Custom section: groups all imports with the specified Prefix.
      - blank                          # Blank section: contains all blank imports. This section is not present unless explicitly enabled.
      - dot                            # Dot section: contains all dot imports. This section is not present unless explicitly enabled.
      - alias                          # Alias section: contains all alias imports. This section is not present unless explicitly enabled.
      - localmodule                    # Local module section: contains all local packages. This section is not present unless explicitly enabled.

    # Skip generated files.
    # Default: true
    skip-generated: false

    # Enable custom order of sections.
    # If `true`, make the section order the same as the order of `sections`.
    # Default: false
    custom-order: true

    # Drops lexical ordering for custom sections.
    # Default: false
    no-lex-order: true

  ginkgolinter:
    # Suppress the wrong length assertion warning.
    # Default: false
    suppress-len-assertion: true

    # Suppress the wrong nil assertion warning.
    # Default: false
    suppress-nil-assertion: true

    # Suppress the wrong error assertion warning.
    # Default: false
    suppress-err-assertion: true

    # Suppress the wrong comparison assertion warning.
    # Default: false
    suppress-compare-assertion: true

    # Suppress the function all in async assertion warning.
    # Default: false
    suppress-async-assertion: true

    # Suppress warning for comparing values from different types, like `int32` and `uint32`
    # Default: false
    suppress-type-compare-assertion: true

    # Trigger warning for ginkgo focus containers like `FDescribe`, `FContext`, `FWhen` or `FIt`
    # Default: false
    forbid-focus-container: true

    # Don't trigger warnings for HaveLen(0)
    # Default: false
    allow-havelen-zero: true

    # Force using `Expect` with `To`, `ToNot` or `NotTo`.
    # Reject using `Expect` with `Should` or `ShouldNot`.
    # Default: false
    force-expect-to: true

    # Best effort validation of async intervals (timeout and polling).
    # Ignored the suppress-async-assertion is true.
    # Default: false
    validate-async-intervals: true

    # Trigger a warning for variable assignments in ginkgo containers like `Describe`, `Context` and `When`, instead of in `BeforeEach()`.
    # Default: false
    forbid-spec-pollution: true

  gochecksumtype:
    # Presence of `default` case in switch statements satisfies exhaustiveness, if all members are not listed.
    # Default: true
    default-signifies-exhaustive: false

  gocognit:
    # Minimal code complexity to report.
    # Default: 30 (but we recommend 10-20)
    min-complexity: 10

  goconst:
    # Minimal length of string constant.
    # Default: 3
    min-len: 2
    # Minimum occurrences of constant string count to trigger issue.
    # Default: 3
    min-occurrences: 2
    # Ignore test files.
    # Default: false
    ignore-tests: true
    # Look for existing constants matching the values.
    # Default: true
    match-constant: false
    # Search also for duplicated numbers.
    # Default: false
    numbers: true
    # Minimum value, only works with goconst.numbers
    # Default: 3
    min: 2
    # Maximum value, only works with goconst.numbers
    # Default: 3
    max: 2
    # Ignore when constant is not used as function argument.
    # Default: true
    ignore-calls: false
    # Exclude strings matching the given regular expression.
    # Default: ""
    ignore-strings: 'foo.+'

  gocritic:
    # Disable all checks.
    # Default: false
    disable-all: true
    # Which checks should be enabled in addition to default checks; can't be combined with 'disabled-checks'.
    # By default, list of stable checks is used (https://go-critic.github.io/overview#checks-overview):
    #   appendAssign, argOrder, assignOp, badCall, badCond, captLocal, caseOrder, codegenComment, commentFormatting,
    #   defaultCaseOrder, deprecatedComment, dupArg, dupBranchBody, dupCase, dupSubExpr, elseif, exitAfterDefer,
    #   flagDeref, flagName, ifElseChain, mapKey, newDeref, offBy1, regexpMust, singleCaseSwitch, sloppyLen,
    #   sloppyTypeAssert, switchTrue, typeSwitchVar, underef, unlambda, unslice, valSwap, wrapperFunc
    # To see which checks are enabled run `GL_DEBUG=gocritic golangci-lint run --enable=gocritic`.
    enabled-checks:
      # Detects suspicious append result assignments.
      # https://go-critic.com/overview.html#appendAssign
      - appendAssign
      # Detects `append` chains to the same slice that can be done in a single `append` call.
      # https://go-critic.com/overview.html#appendCombine
      - appendCombine
      # Detects suspicious arguments order.
      # https://go-critic.com/overview.html#argOrder
      - argOrder
      # Detects assignments that can be simplified by using assignment operators.
      # https://go-critic.com/overview.html#assignOp
      - assignOp
      # Detects suspicious function calls.
      # https://go-critic.com/overview.html#badCall
      - badCall
      # Detects suspicious condition expressions.
      # https://go-critic.com/overview.html#badCond
      - badCond
      # Detects suspicious mutex lock/unlock operations.
      # https://go-critic.com/overview.html#badLock
      - badLock
      # Detects suspicious regexp patterns.
      # https://go-critic.com/overview.html#badRegexp
      - badRegexp
      # Detects bad usage of sort package.
      # https://go-critic.com/overview.html#badSorting
      - badSorting
      # Detects bad usage of sync.OnceFunc.
      # https://go-critic.com/overview.html#badSyncOnceFunc
      - badSyncOnceFunc
      # Detects bool expressions that can be simplified.
      # https://go-critic.com/overview.html#boolExprSimplify
      - boolExprSimplify
      # Detects when predeclared identifiers are shadowed in assignments.
      # https://go-critic.com/overview.html#builtinShadow
      - builtinShadow
      # Detects top-level declarations that shadow the predeclared identifiers.
      # https://go-critic.com/overview.html#builtinShadowDecl
      - builtinShadowDecl
      # Detects capitalized names for local variables.
      # https://go-critic.com/overview.html#captLocal
      - captLocal
      # Detects erroneous case order inside switch statements.
      # https://go-critic.com/overview.html#caseOrder
      - caseOrder
      # Detects malformed 'code generated' file comments.
      # https://go-critic.com/overview.html#codegenComment
      - codegenComment
      # Detects comments with non-idiomatic formatting.
      # https://go-critic.com/overview.html#commentFormatting
      - commentFormatting
      # Detects commented-out code inside function bodies.
      # https://go-critic.com/overview.html#commentedOutCode
      - commentedOutCode
      # Detects commented-out imports.
      # https://go-critic.com/overview.html#commentedOutImport
      - commentedOutImport
      # Detects when default case in switch isn't on 1st or last position.
      # https://go-critic.com/overview.html#defaultCaseOrder
      - defaultCaseOrder
      # Detects loops inside functions that use defer.
      # https://go-critic.com/overview.html#deferInLoop
      - deferInLoop
      # Detects deferred function literals that can be simplified.
      # https://go-critic.com/overview.html#deferUnlambda
      - deferUnlambda
      # Detects malformed 'deprecated' doc-comments.
      # https://go-critic.com/overview.html#deprecatedComment
      - deprecatedComment
      # Detects comments that silence go lint complaints about doc-comment.
      # https://go-critic.com/overview.html#docStub
      - docStub
      # Detects suspicious duplicated arguments.
      # https://go-critic.com/overview.html#dupArg
      - dupArg
      # Detects duplicated branch bodies inside conditional statements.
      # https://go-critic.com/overview.html#dupBranchBody
      - dupBranchBody
      # Detects duplicated case clauses inside switch or select statements.
      # https://go-critic.com/overview.html#dupCase
      - dupCase
      # Detects multiple imports of the same package under different aliases.
      # https://go-critic.com/overview.html#dupImport
      - dupImport
      # Detects suspicious duplicated sub-expressions.
      # https://go-critic.com/overview.html#dupSubExpr
      - dupSubExpr
      # Detects suspicious formatting strings usage.
      # https://go-critic.com/overview.html#dynamicFmtString
      - dynamicFmtString
      # Detects else with nested if statement that can be replaced with else-if.
      # https://go-critic.com/overview.html#elseif
      - elseif
      # Detects suspicious empty declarations blocks.
      # https://go-critic.com/overview.html#emptyDecl
      - emptyDecl
      # Detects fallthrough that can be avoided by using multi case values.
      # https://go-critic.com/overview.html#emptyFallthrough
      - emptyFallthrough
      # Detects empty string checks that can be written more idiomatically.
      # https://go-critic.com/overview.html#emptyStringTest
      - emptyStringTest
      # Detects unoptimal strings/bytes case-insensitive comparison.
      # https://go-critic.com/overview.html#equalFold
      - equalFold
      # Detects unwanted dependencies on the evaluation order.
      # https://go-critic.com/overview.html#evalOrder
      - evalOrder
      # Detects calls to exit/fatal inside functions that use defer.
      # https://go-critic.com/overview.html#exitAfterDefer
      - exitAfterDefer
      # Detects exposed methods from sync.Mutex and sync.RWMutex.
      # https://go-critic.com/overview.html#exposedSyncMutex
      - exposedSyncMutex
      # Detects suspicious reassignment of error from another package.
      # https://go-critic.com/overview.html#externalErrorReassign
      - externalErrorReassign
      # Detects problems in filepath.Join() function calls.
      # https://go-critic.com/overview.html#filepathJoin
      - filepathJoin
      # Detects immediate dereferencing of `flag` package pointers.
      # https://go-critic.com/overview.html#flagDeref
      - flagDeref
      # Detects suspicious flag names.
      # https://go-critic.com/overview.html#flagName
      - flagName
      # Detects hex literals that have mixed case letter digits.
      # https://go-critic.com/overview.html#hexLiteral
      - hexLiteral
      # Detects nil usages in http.NewRequest calls, suggesting http.NoBody as an alternative.
      # https://go-critic.com/overview.html#httpNoBody
      - httpNoBody
      # Detects params that incur excessive amount of copying.
      # https://go-critic.com/overview.html#hugeParam
      - hugeParam
      # Detects repeated if-else statements and suggests to replace them with switch statement.
      # https://go-critic.com/overview.html#ifElseChain
      - ifElseChain
      # Detects when imported package names shadowed in the assignments.
      # https://go-critic.com/overview.html#importShadow
      - importShadow
      # Detects strings.Index calls that may cause unwanted allocs.
      # https://go-critic.com/overview.html#indexAlloc
      - indexAlloc
      # Detects non-assignment statements inside if/switch init clause.
      # https://go-critic.com/overview.html#initClause
      - initClause
      # Detects suspicious map literal keys.
      # https://go-critic.com/overview.html#mapKey
      - mapKey
      # Detects method expression call that can be replaced with a method call.
      # https://go-critic.com/overview.html#methodExprCall
      - methodExprCall
      # Finds where nesting level could be reduced.
      # https://go-critic.com/overview.html#nestingReduce
      - nestingReduce
      # Detects immediate dereferencing of `new` expressions.
      # https://go-critic.com/overview.html#newDeref
      - newDeref
      # Detects return statements those results evaluate to nil.
      # https://go-critic.com/overview.html#nilValReturn
      - nilValReturn
      # Detects old-style octal literals.
      # https://go-critic.com/overview.html#octalLiteral
      - octalLiteral
      # Detects various off-by-one kind of errors.
      # https://go-critic.com/overview.html#offBy1
      - offBy1
      # Detects if function parameters could be combined by type and suggest the way to do it.
      # https://go-critic.com/overview.html#paramTypeCombine
      - paramTypeCombine
      # Detects expressions like []rune(s)[0] that may cause unwanted rune slice allocation.
      # https://go-critic.com/overview.html#preferDecodeRune
      - preferDecodeRune
      # Detects concatenation with os.PathSeparator which can be replaced with filepath.Join.
      # https://go-critic.com/overview.html#preferFilepathJoin
      - preferFilepathJoin
      # Detects fmt.Sprint(f/ln) calls which can be replaced with fmt.Fprint(f/ln).
      # https://go-critic.com/overview.html#preferFprint
      - preferFprint
      # Detects w.Write or io.WriteString calls which can be replaced with w.WriteString.
      # https://go-critic.com/overview.html#preferStringWriter
      - preferStringWriter
      # Detects WriteRune calls with rune literal argument that is single byte and reports to use WriteByte instead.
      # https://go-critic.com/overview.html#preferWriteByte
      - preferWriteByte
      # Detects input and output parameters that have a type of pointer to referential type.
      # https://go-critic.com/overview.html#ptrToRefParam
      - ptrToRefParam
      # Detects append all its data while range it.
      # https://go-critic.com/overview.html#rangeAppendAll
      - rangeAppendAll
      # Detects expensive copies of `for` loop range expressions.
      # https://go-critic.com/overview.html#rangeExprCopy
      - rangeExprCopy
      # Detects loops that copy big objects during each iteration.
      # https://go-critic.com/overview.html#rangeValCopy
      - rangeValCopy
      # Detects redundant fmt.Sprint calls.
      # https://go-critic.com/overview.html#redundantSprint
      - redundantSprint
      # Detects `regexp.Compile*` that can be replaced with `regexp.MustCompile*`.
      # https://go-critic.com/overview.html#regexpMust
      - regexpMust
      # Detects suspicious regexp patterns.
      # https://go-critic.com/overview.html#regexpPattern
      - regexpPattern
      # Detects regexp patterns that can be simplified.
      # https://go-critic.com/overview.html#regexpSimplify
      - regexpSimplify
      # Detects suspicious http.Error call without following return.
      # https://go-critic.com/overview.html#returnAfterHttpError
      - returnAfterHttpError
      # Runs user-defined rules using ruleguard linter.
      # https://go-critic.com/overview.html#ruleguard
      - ruleguard
      # Detects switch statements that could be better written as if statement.
      # https://go-critic.com/overview.html#singleCaseSwitch
      - singleCaseSwitch
      # Detects slice clear loops, suggests an idiom that is recognized by the Go compiler.
      # https://go-critic.com/overview.html#sliceClear
      - sliceClear
      # Detects usage of `len` when result is obvious or doesn't make sense.
      # https://go-critic.com/overview.html#sloppyLen
      - sloppyLen
      # Detects suspicious/confusing re-assignments.
      # https://go-critic.com/overview.html#sloppyReassign
      - sloppyReassign
      # Detects redundant type assertions.
      # https://go-critic.com/overview.html#sloppyTypeAssert
      - sloppyTypeAssert
      # Detects suspicious sort.Slice calls.
      # https://go-critic.com/overview.html#sortSlice
      - sortSlice
      # Detects "%s" formatting directives that can be replaced with %q.
      # https://go-critic.com/overview.html#sprintfQuotedString
      - sprintfQuotedString
      # Detects issue in Query() and Exec() calls.
      # https://go-critic.com/overview.html#sqlQuery
      - sqlQuery
      # Detects string concat operations that can be simplified.
      # https://go-critic.com/overview.html#stringConcatSimplify
      - stringConcatSimplify
      # Detects redundant conversions between string and []byte.
      # https://go-critic.com/overview.html#stringXbytes
      - stringXbytes
      # Detects strings.Compare usage.
      # https://go-critic.com/overview.html#stringsCompare
      - stringsCompare
      # Detects switch-over-bool statements that use explicit `true` tag value.
      # https://go-critic.com/overview.html#switchTrue
      - switchTrue
      # Detects sync.Map load+delete operations that can be replaced with LoadAndDelete.
      # https://go-critic.com/overview.html#syncMapLoadAndDelete
      - syncMapLoadAndDelete
      # Detects manual conversion to milli- or microseconds.
      # https://go-critic.com/overview.html#timeExprSimplify
      - timeExprSimplify
      # Detects TODO comments without detail/assignee.
      # https://go-critic.com/overview.html#todoCommentWithoutDetail
      - todoCommentWithoutDetail
      # Detects function with too many results.
      # https://go-critic.com/overview.html#tooManyResultsChecker
      - tooManyResultsChecker
      # Detects potential truncation issues when comparing ints of different sizes.
      # https://go-critic.com/overview.html#truncateCmp
      - truncateCmp
      # Detects repeated type assertions and suggests to replace them with type switch statement.
      # https://go-critic.com/overview.html#typeAssertChain
      - typeAssertChain
      # Detects method declarations preceding the type definition itself.
      # https://go-critic.com/overview.html#typeDefFirst
      - typeDefFirst
      # Detects type switches that can benefit from type guard clause with variable.
      # https://go-critic.com/overview.html#typeSwitchVar
      - typeSwitchVar
      # Detects unneeded parenthesis inside type expressions and suggests to remove them.
      # https://go-critic.com/overview.html#typeUnparen
      - typeUnparen
      # Detects unchecked errors in if statements.
      # https://go-critic.com/overview.html#uncheckedInlineErr
      - uncheckedInlineErr
      # Detects dereference expressions that can be omitted.
      # https://go-critic.com/overview.html#underef
      - underef
      # Detects redundant statement labels.
      # https://go-critic.com/overview.html#unlabelStmt
      - unlabelStmt
      # Detects function literals that can be simplified.
      # https://go-critic.com/overview.html#unlambda
      - unlambda
      # Detects unnamed results that may benefit from names.
      # https://go-critic.com/overview.html#unnamedResult
      - unnamedResult
      # Detects unnecessary braced statement blocks.
      # https://go-critic.com/overview.html#unnecessaryBlock
      - unnecessaryBlock
      # Detects redundantly deferred calls.
      # https://go-critic.com/overview.html#unnecessaryDefer
      - unnecessaryDefer
      # Detects slice expressions that can be simplified to sliced expression itself.
      # https://go-critic.com/overview.html#unslice
      - unslice
      # Detects value swapping code that are not using parallel assignment.
      # https://go-critic.com/overview.html#valSwap
      - valSwap
      # Detects conditions that are unsafe due to not being exhaustive.
      # https://go-critic.com/overview.html#weakCond
      - weakCond
      # Ensures that `//nolint` comments include an explanation.
      # https://go-critic.com/overview.html#whyNoLint
      - whyNoLint
      # Detects function calls that can be replaced with convenience wrappers.
      # https://go-critic.com/overview.html#wrapperFunc
      - wrapperFunc
      # Detects Yoda style expressions and suggests to replace them.
      # https://go-critic.com/overview.html#yodaStyleExpr
      - yodaStyleExpr

    # Enable all checks.
    # Default: false
    enable-all: true
    # Which checks should be disabled; can't be combined with 'enabled-checks'.
    # Default: []
    disabled-checks:
      - appendAssign
      - appendCombine
      - argOrder
      - assignOp
      - badCall
      - badCond
      - badLock
      - badRegexp
      - badSorting
      - badSyncOnceFunc
      - boolExprSimplify
      - builtinShadow
      - builtinShadowDecl
      - captLocal
      - caseOrder
      - codegenComment
      - commentFormatting
      - commentedOutCode
      - commentedOutImport
      - defaultCaseOrder
      - deferInLoop
      - deferUnlambda
      - deprecatedComment
      - docStub
      - dupArg
      - dupBranchBody
      - dupCase
      - dupImport
      - dupSubExpr
      - dynamicFmtString
      - elseif
      - emptyDecl
      - emptyFallthrough
      - emptyStringTest
      - equalFold
      - evalOrder
      - exitAfterDefer
      - exposedSyncMutex
      - externalErrorReassign
      - filepathJoin
      - flagDeref
      - flagName
      - hexLiteral
      - httpNoBody
      - hugeParam
      - ifElseChain
      - importShadow
      - indexAlloc
      - initClause
      - mapKey
      - methodExprCall
      - nestingReduce
      - newDeref
      - nilValReturn
      - octalLiteral
      - offBy1
      - paramTypeCombine
      - preferDecodeRune
      - preferFilepathJoin
      - preferFprint
      - preferStringWriter
      - preferWriteByte
      - ptrToRefParam
      - rangeAppendAll
      - rangeExprCopy
      - rangeValCopy
      - redundantSprint
      - regexpMust
      - regexpPattern
      - regexpSimplify
      - returnAfterHttpError
      - ruleguard
      - singleCaseSwitch
      - sliceClear
      - sloppyLen
      - sloppyReassign
      - sloppyTypeAssert
      - sortSlice
      - sprintfQuotedString
      - sqlQuery
      - stringConcatSimplify
      - stringXbytes
      - stringsCompare
      - switchTrue
      - syncMapLoadAndDelete
      - timeExprSimplify
      - todoCommentWithoutDetail
      - tooManyResultsChecker
      - truncateCmp
      - typeAssertChain
      - typeDefFirst
      - typeSwitchVar
      - typeUnparen
      - uncheckedInlineErr
      - underef
      - unlabelStmt
      - unlambda
      - unnamedResult
      - unnecessaryBlock
      - unnecessaryDefer
      - unslice
      - valSwap
      - weakCond
      - whyNoLint
      - wrapperFunc
      - yodaStyleExpr

    # Enable multiple checks by tags in addition to default checks.
    # Run `GL_DEBUG=gocritic golangci-lint run --enable=gocritic` to see all tags and checks.
    # See https://github.com/go-critic/go-critic#usage -> section "Tags".
    # Default: []
    enabled-tags:
      - diagnostic
      - style
      - performance
      - experimental
      - opinionated
    disabled-tags:
      - diagnostic
      - style
      - performance
      - experimental
      - opinionated

    # Settings passed to gocritic.
    # The settings key is the name of a supported gocritic checker.
    # The list of supported checkers can be find in https://go-critic.github.io/overview.
    settings:
      # Must be valid enabled check name.
      captLocal:
        # Whether to restrict checker to params only.
        # Default: true
        paramsOnly: false
      commentedOutCode:
        # Min length of the comment that triggers a warning.
        # Default: 15
        minLength: 50
      elseif:
        # Whether to skip balanced if-else pairs.
        # Default: true
        skipBalanced: false
      hugeParam:
        # Size in bytes that makes the warning trigger.
        # Default: 80
        sizeThreshold: 70
      ifElseChain:
        # Min number of if-else blocks that makes the warning trigger.
        # Default: 2
        minThreshold: 4
      nestingReduce:
        # Min number of statements inside a branch to trigger a warning.
        # Default: 5
        bodyWidth: 4
      rangeExprCopy:
        # Size in bytes that makes the warning trigger.
        # Default: 512
        sizeThreshold: 516
        # Whether to check test functions
        # Default: true
        skipTestFuncs: false
      rangeValCopy:
        # Size in bytes that makes the warning trigger.
        # Default: 128
        sizeThreshold: 32
        # Whether to check test functions.
        # Default: true
        skipTestFuncs: false
      ruleguard:
        # Enable debug to identify which 'Where' condition was rejected.
        # The value of the parameter is the name of a function in a ruleguard file.
        #
        # When a rule is evaluated:
        # If:
        #   The Match() clause is accepted; and
        #   One of the conditions in the Where() clause is rejected,
        # Then:
        #   ruleguard prints the specific Where() condition that was rejected.
        #
        # The option is passed to the ruleguard 'debug-group' argument.
        # Default: ""
        debug: 'emptyDecl'
        # Determines the behavior when an error occurs while parsing ruleguard files.
        # If flag is not set, log error and skip rule files that contain an error.
        # If flag is set, the value must be a comma-separated list of error conditions.
        # - 'all':    fail on all errors.
        # - 'import': ruleguard rule imports a package that cannot be found.
        # - 'dsl':    gorule file does not comply with the ruleguard DSL.
        # Default: ""
        failOn: dsl,import
        # Comma-separated list of file paths containing ruleguard rules.
        # If a path is relative, it is relative to the directory where the golangci-lint command is executed.
        # The special '${configDir}' variable is substituted with the absolute directory containing the golangci config file.
        # Glob patterns such as 'rules-*.go' may be specified.
        # Default: ""
        rules: '${configDir}/ruleguard/rules-*.go,${configDir}/myrule1.go'
        # Comma-separated list of enabled groups or skip empty to enable everything.
        # Tags can be defined with # character prefix.
        # Default: "<all>"
        enable: "myGroupName,#myTagName"
        # Comma-separated list of disabled groups or skip empty to enable everything.
        # Tags can be defined with # character prefix.
        # Default: ""
        disable: "myGroupName,#myTagName"
      tooManyResultsChecker:
        # Maximum number of results.
        # Default: 5
        maxResults: 10
      truncateCmp:
        # Whether to skip int/uint/uintptr types.
        # Default: true
        skipArchDependent: false
      underef:
        # Whether to skip (*x).method() calls where x is a pointer receiver.
        # Default: true
        skipRecvDeref: false
      unnamedResult:
        # Whether to check exported functions.
        # Default: false
        checkExported: true

  gocyclo:
    # Minimal code complexity to report.
    # Default: 30 (but we recommend 10-20)
    min-complexity: 10

  godot:
    # Comments to be checked: `declarations`, `toplevel`, or `all`.
    # Default: declarations
    scope: toplevel
    # List of regexps for excluding particular comment lines from check.
    # Default: []
    exclude:
      # Exclude todo and fixme comments.
      - "^fixme:"
      - "^todo:"
    # Check that each sentence ends with a period.
    # Default: true
    period: false
    # Check that each sentence starts with a capital letter.
    # Default: false
    capital: true

  godox:
    # Report any comments starting with keywords, this is useful for TODO or FIXME comments that
    # might be left in the code accidentally and should be resolved before merging.
    # Default: ["TODO", "BUG", "FIXME"]
    keywords:
      - NOTE
      - OPTIMIZE # marks code that should be optimized before merging
      - HACK # marks hack-around that should be removed before merging

  gofmt:
    # Simplify code: gofmt with `-s` option.
    # Default: true
    simplify: false
    # Apply the rewrite rules to the source before reformatting.
    # https://pkg.go.dev/cmd/gofmt
    # Default: []
    rewrite-rules:
      - pattern: 'interface{}'
        replacement: 'any'
      - pattern: 'a[b:len(a)]'
        replacement: 'a[b:]'

  gofumpt:
    # Module path which contains the source code being formatted.
    # Default: ""
    module-path: github.com/org/project

    # Choose whether to use the extra rules.
    # Default: false
    extra-rules: true

  goheader:
    # Supports two types 'const` and `regexp`.
    # Values can be used recursively.
    # Default: {}
    values:
      const:
        # Define here const type values in format k:v.
        # For example:
        COMPANY: MY COMPANY
      regexp:
        # Define here regexp type values.
        # for example:
        AUTHOR: .*@mycompany\.com
    # The template use for checking.
    # Default: ""
    template: |-
      # Put here copyright header template for source code files
      # For example:
      # Note: {{ YEAR }} is a builtin value that returns the year relative to the current machine time.
      #
      # {{ AUTHOR }} {{ COMPANY }} {{ YEAR }}
      # SPDX-License-Identifier: Apache-2.0

      # Licensed under the Apache License, Version 2.0 (the "License");
      # you may not use this file except in compliance with the License.
      # You may obtain a copy of the License at:

      #   http://www.apache.org/licenses/LICENSE-2.0

      # Unless required by applicable law or agreed to in writing, software
      # distributed under the License is distributed on an "AS IS" BASIS,
      # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
      # See the License for the specific language governing permissions and
      # limitations under the License.
    # As alternative of directive 'template', you may put the path to file with the template source.
    # Useful if you need to load the template from a specific file.
    # Default: ""
    template-path: /path/to/my/template.tmpl

  goimports:
    # A comma-separated list of prefixes, which, if set, checks import paths
    # with the given prefixes are grouped after 3rd-party packages.
    # Default: ""
    local-prefixes: github.com/org/project

  gomoddirectives:
    # Allow local `replace` directives.
    # Default: false
    replace-local: false
    # List of allowed `replace` directives.
    # Default: []
    replace-allow-list:
      - launchpad.net/gocheck
    # Allow to not explain why the version has been retracted in the `retract` directives.
    # Default: false
    retract-allow-no-explanation: false
    # Forbid the use of the `exclude` directives.
    # Default: false
    exclude-forbidden: false

  gomodguard:
    allowed:
      # List of allowed modules.
      # Default: []
      modules:
        - gopkg.in/yaml.v2
      # List of allowed module domains.
      # Default: []
      domains:
        - golang.org
    blocked:
      # List of blocked modules.
      # Default: []
      modules:
        # Blocked module.
        - github.com/uudashr/go-module:
            # Recommended modules that should be used instead. (Optional)
            recommendations:
              - golang.org/x/mod
            # Reason why the recommended module should be used. (Optional)
            reason: "`mod` is the official go.mod parser library."
      # List of blocked module version constraints.
      # Default: []
      versions:
        # Blocked module with version constraint.
        - github.com/mitchellh/go-homedir:
            # Version constraint, see https://github.com/Masterminds/semver#basic-comparisons.
            version: "< 1.1.0"
            # Reason why the version constraint exists. (Optional)
            reason: "testing if blocked version constraint works."
      # Set to true to raise lint issues for packages that are loaded from a local path via replace directive.
      # Default: false
      local_replace_directives: false

  gosimple:
    # Sxxxx checks in https://staticcheck.io/docs/configuration/options/#checks
    # Default: ["*"]
    checks:
      # Use plain channel send or receive instead of single-case select.
      # https://staticcheck.dev/docs/checks/#S1000
      - S1000
      # Replace for loop with call to copy.
      # https://staticcheck.dev/docs/checks/#S1001
      - S1001
      # Omit comparison with boolean constant.
      # https://staticcheck.dev/docs/checks/#S1002
      - S1002
      # Replace call to 'strings.Index' with 'strings.Contains'.
      # https://staticcheck.dev/docs/checks/#S1003
      - S1003
      # Replace call to 'bytes.Compare' with 'bytes.Equal'.
      # https://staticcheck.dev/docs/checks/#S1004
      - S1004
      # Drop unnecessary use of the blank identifier.
      # https://staticcheck.dev/docs/checks/#S1005
      - S1005
      # Use "for { ... }" for infinite loops.
      # https://staticcheck.dev/docs/checks/#S1006
      - S1006
      # Simplify regular expression by using raw string literal.
      # https://staticcheck.dev/docs/checks/#S1007
      - S1007
      # Simplify returning boolean expression.
      # https://staticcheck.dev/docs/checks/#S1008
      - S1008
      # Omit redundant nil check on slices, maps, and channels.
      # https://staticcheck.dev/docs/checks/#S1009
      - S1009
      # Omit default slice index.
      # https://staticcheck.dev/docs/checks/#S1010
      - S1010
      # Use a single 'append' to concatenate two slices.
      # https://staticcheck.dev/docs/checks/#S1011
      - S1011
      # Replace 'time.Now().Sub(x)' with 'time.Since(x)'.
      # https://staticcheck.dev/docs/checks/#S1012
      - S1012
      # Use a type conversion instead of manually copying struct fields.
      # https://staticcheck.dev/docs/checks/#S1016
      - S1016
      # Replace manual trimming with 'strings.TrimPrefix'.
      # https://staticcheck.dev/docs/checks/#S1017
      - S1017
      # Use "copy" for sliding elements.
      # https://staticcheck.dev/docs/checks/#S1018
      - S1018
      # Simplify "make" call by omitting redundant arguments.
      # https://staticcheck.dev/docs/checks/#S1019
      - S1019
      # Omit redundant nil check in type assertion.
      # https://staticcheck.dev/docs/checks/#S1020
      - S1020
      # Merge variable declaration and assignment.
      # https://staticcheck.dev/docs/checks/#S1021
      - S1021
      # Omit redundant control flow.
      # https://staticcheck.dev/docs/checks/#S1023
      - S1023
      # Replace 'x.Sub(time.Now())' with 'time.Until(x)'.
      # https://staticcheck.dev/docs/checks/#S1024
      - S1024
      # Don't use 'fmt.Sprintf("%s", x)' unnecessarily.
      # https://staticcheck.dev/docs/checks/#S1025
      - S1025
      # Simplify error construction with 'fmt.Errorf'.
      # https://staticcheck.dev/docs/checks/#S1028
      - S1028
      # Range over the string directly.
      # https://staticcheck.dev/docs/checks/#S1029
      - S1029
      # Use 'bytes.Buffer.String' or 'bytes.Buffer.Bytes'.
      # https://staticcheck.dev/docs/checks/#S1030
      - S1030
      # Omit redundant nil check around loop.
      # https://staticcheck.dev/docs/checks/#S1031
      - S1031
      # Use 'sort.Ints(x)', 'sort.Float64s(x)', and 'sort.Strings(x)'.
      # https://staticcheck.dev/docs/checks/#S1032
      - S1032
      # Unnecessary guard around call to "delete".
      # https://staticcheck.dev/docs/checks/#S1033
      - S1033
      # Use result of type assertion to simplify cases.
      # https://staticcheck.dev/docs/checks/#S1034
      - S1034
      # Redundant call to 'net/http.CanonicalHeaderKey' in method call on 'net/http.Header'.
      # https://staticcheck.dev/docs/checks/#S1035
      - S1035
      # Unnecessary guard around map access.
      # https://staticcheck.dev/docs/checks/#S1036
      - S1036
      # Elaborate way of sleeping.
      # https://staticcheck.dev/docs/checks/#S1037
      - S1037
      # Unnecessarily complex way of printing formatted string.
      # https://staticcheck.dev/docs/checks/#S1038
      - S1038
      # Unnecessary use of 'fmt.Sprint'.
      # https://staticcheck.dev/docs/checks/#S1039
      - S1039
      # Type assertion to current type.
      # https://staticcheck.dev/docs/checks/#S1040
      - S1040

  gosec:
    # To select a subset of rules to run.
    # Available rules: https://github.com/securego/gosec#available-rules
    # Default: [] - means include all rules
    includes:
      - G101 # Look for hard coded credentials
      - G102 # Bind to all interfaces
      - G103 # Audit the use of unsafe block
      - G104 # Audit errors not checked
      - G106 # Audit the use of ssh.InsecureIgnoreHostKey
      - G107 # Url provided to HTTP request as taint input
      - G108 # Profiling endpoint automatically exposed on /debug/pprof
      - G109 # Potential Integer overflow made by strconv.Atoi result conversion to int16/32
      - G110 # Potential DoS vulnerability via decompression bomb
      - G111 # Potential directory traversal
      - G112 # Potential slowloris attack
      - G113 # Usage of Rat.SetString in math/big with an overflow (CVE-2022-23772)
      - G114 # Use of net/http serve function that has no support for setting timeouts
      - G115 # Potential integer overflow when converting between integer types
      - G201 # SQL query construction using format string
      - G202 # SQL query construction using string concatenation
      - G203 # Use of unescaped data in HTML templates
      - G204 # Audit use of command execution
      - G301 # Poor file permissions used when creating a directory
      - G302 # Poor file permissions used with chmod
      - G303 # Creating tempfile using a predictable path
      - G304 # File path provided as taint input
      - G305 # File traversal when extracting zip/tar archive
      - G306 # Poor file permissions used when writing to a new file
      - G307 # Poor file permissions used when creating a file with os.Create
      - G401 # Detect the usage of MD5 or SHA1
      - G402 # Look for bad TLS connection settings
      - G403 # Ensure minimum RSA key length of 2048 bits
      - G404 # Insecure random number source (rand)
      - G405 # Detect the usage of DES or RC4
      - G406 # Detect the usage of MD4 or RIPEMD160
      - G501 # Import blocklist: crypto/md5
      - G502 # Import blocklist: crypto/des
      - G503 # Import blocklist: crypto/rc4
      - G504 # Import blocklist: net/http/cgi
      - G505 # Import blocklist: crypto/sha1
      - G506 # Import blocklist: golang.org/x/crypto/md4
      - G507 #Import blocklist: golang.org/x/crypto/ripemd160
      - G601 # Implicit memory aliasing of items from a range statement
      - G602 # Slice access out of bounds

    # To specify a set of rules to explicitly exclude.
    # Available rules: https://github.com/securego/gosec#available-rules
    # Default: []
    excludes:
      - G101 # Look for hard coded credentials
      - G102 # Bind to all interfaces
      - G103 # Audit the use of unsafe block
      - G104 # Audit errors not checked
      - G106 # Audit the use of ssh.InsecureIgnoreHostKey
      - G107 # Url provided to HTTP request as taint input
      - G108 # Profiling endpoint automatically exposed on /debug/pprof
      - G109 # Potential Integer overflow made by strconv.Atoi result conversion to int16/32
      - G110 # Potential DoS vulnerability via decompression bomb
      - G111 # Potential directory traversal
      - G112 # Potential slowloris attack
      - G113 # Usage of Rat.SetString in math/big with an overflow (CVE-2022-23772)
      - G114 # Use of net/http serve function that has no support for setting timeouts
      - G115 # Potential integer overflow when converting between integer types
      - G201 # SQL query construction using format string
      - G202 # SQL query construction using string concatenation
      - G203 # Use of unescaped data in HTML templates
      - G204 # Audit use of command execution
      - G301 # Poor file permissions used when creating a directory
      - G302 # Poor file permissions used with chmod
      - G303 # Creating tempfile using a predictable path
      - G304 # File path provided as taint input
      - G305 # File traversal when extracting zip/tar archive
      - G306 # Poor file permissions used when writing to a new file
      - G307 # Poor file permissions used when creating a file with os.Create
      - G401 # Detect the usage of MD5 or SHA1
      - G402 # Look for bad TLS connection settings
      - G403 # Ensure minimum RSA key length of 2048 bits
      - G404 # Insecure random number source (rand)
      - G405 # Detect the usage of DES or RC4
      - G406 # Detect the usage of MD4 or RIPEMD160
      - G501 # Import blocklist: crypto/md5
      - G502 # Import blocklist: crypto/des
      - G503 # Import blocklist: crypto/rc4
      - G504 # Import blocklist: net/http/cgi
      - G505 # Import blocklist: crypto/sha1
      - G506 # Import blocklist: golang.org/x/crypto/md4
      - G507 #Import blocklist: golang.org/x/crypto/ripemd160
      - G601 # Implicit memory aliasing of items from a range statement
      - G602 # Slice access out of bounds

    # Exclude generated files
    # Default: false
    exclude-generated: true

    # Filter out the issues with a lower severity than the given value.
    # Valid options are: low, medium, high.
    # Default: low
    severity: medium

    # Filter out the issues with a lower confidence than the given value.
    # Valid options are: low, medium, high.
    # Default: low
    confidence: medium

    # Concurrency value.
    # Default: the number of logical CPUs usable by the current process.
    concurrency: 12

    # To specify the configuration of rules.
    config:
      # Globals are applicable to all rules.
      global:
        # If true, ignore #nosec in comments (and an alternative as well).
        # Default: false
        nosec: true
        # Add an alternative comment prefix to #nosec (both will work at the same time).
        # Default: ""
        "#nosec": "#my-custom-nosec"
        # Define whether nosec issues are counted as finding or not.
        # Default: false
        show-ignored: true
        # Audit mode enables addition checks that for normal code analysis might be too nosy.
        # Default: false
        audit: true
      G101:
        # Regexp pattern for variables and constants to find.
        # Default: "(?i)passwd|pass|password|pwd|secret|token|pw|apiKey|bearer|cred"
        pattern: "(?i)example"
        # If true, complain about all cases (even with low entropy).
        # Default: false
        ignore_entropy: false
        # Maximum allowed entropy of the string.
        # Default: "80.0"
        entropy_threshold: "80.0"
        # Maximum allowed value of entropy/string length.
        # Is taken into account if entropy >= entropy_threshold/2.
        # Default: "3.0"
        per_char_threshold: "3.0"
        # Calculate entropy for first N chars of the string.
        # Default: "16"
        truncate: "32"
      # Additional functions to ignore while checking unhandled errors.
      # Following functions always ignored:
      #   bytes.Buffer:
      #     - Write
      #     - WriteByte
      #     - WriteRune
      #     - WriteString
      #   fmt:
      #     - Print
      #     - Printf
      #     - Println
      #     - Fprint
      #     - Fprintf
      #     - Fprintln
      #   strings.Builder:
      #     - Write
      #     - WriteByte
      #     - WriteRune
      #     - WriteString
      #   io.PipeWriter:
      #     - CloseWithError
      #   hash.Hash:
      #     - Write
      #   os:
      #     - Unsetenv
      # Default: {}
      G104:
        fmt:
          - Fscanf
      G111:
        # Regexp pattern to find potential directory traversal.
        # Default: "http\\.Dir\\(\"\\/\"\\)|http\\.Dir\\('\\/'\\)"
        pattern: "custom\\.Dir\\(\\)"
      # Maximum allowed permissions mode for os.Mkdir and os.MkdirAll
      # Default: "0750"
      G301: "0750"
      # Maximum allowed permissions mode for os.OpenFile and os.Chmod
      # Default: "0600"
      G302: "0600"
      # Maximum allowed permissions mode for os.WriteFile and ioutil.WriteFile
      # Default: "0600"
      G306: "0600"

  gosmopolitan:
    # Allow and ignore `time.Local` usages.
    #
    # Default: false
    allow-time-local: true
    # List of fully qualified names in the `full/pkg/path.name` form, to act as "i18n escape hatches".
    # String literals inside call-like expressions to, or struct literals of those names,
    # are exempt from the writing system check.
    #
    # Default: []
    escape-hatches:
      - 'github.com/nicksnyder/go-i18n/v2/i18n.Message'
      - 'example.com/your/project/i18n/markers.Raw'
      - 'example.com/your/project/i18n/markers.OK'
      - 'example.com/your/project/i18n/markers.TODO'
      - 'command-line-arguments.Simple'
    # Ignore test files.
    #
    # Default: true
    ignore-tests: false
    # List of Unicode scripts to watch for any usage in string literals.
    # https://pkg.go.dev/unicode#pkg-variables
    #
    # Default: ["Han"]
    watch-for-scripts:
      - Devanagari
      - Han
      - Hangul
      - Hiragana
      - Katakana

  govet:
    # Disable all analyzers.
    # Default: false
    disable-all: true
    # Enable analyzers by name.
    # (in addition to default:
    #   appends, asmdecl, assign, atomic, bools, buildtag, cgocall, composites, copylocks, defers, directive, errorsas,
    #   framepointer, httpresponse, ifaceassert, loopclosure, lostcancel, nilfunc, printf, shift, sigchanyzer, slog,
    #   stdmethods, stringintconv, structtag, testinggoroutine, tests, timeformat, unmarshal, unreachable, unsafeptr,
    #   unusedresult
    # ).
    # Run `GL_DEBUG=govet golangci-lint run --enable=govet` to see default, all available analyzers, and enabled analyzers.
    # Default: []
    enable:
      # Check for missing values after append.
      - appends
      # Report mismatches between assembly files and Go declarations.
      - asmdecl
      # Check for useless assignments.
      - assign
      # Check for common mistakes using the sync/atomic package.
      - atomic
      # Check for non-64-bits-aligned arguments to sync/atomic functions.
      - atomicalign
      # Check for common mistakes involving boolean operators.
      - bools
      # Check //go:build and // +build directives.
      - buildtag
      # Detect some violations of the cgo pointer passing rules.
      - cgocall
      # Check for unkeyed composite literals.
      - composites
      # Check for locks erroneously passed by value.
      - copylocks
      # Check for calls of reflect.DeepEqual on error values.
      - deepequalerrors
      # Report common mistakes in defer statements.
      - defers
      # Check Go toolchain directives such as //go:debug.
      - directive
      # Report passing non-pointer or non-error values to errors.As.
      - errorsas
      # Find structs that would use less memory if their fields were sorted.
      - fieldalignment
      # Find calls to a particular function.
      - findcall
      # Report assembly that clobbers the frame pointer before saving it.
      - framepointer
      # Check for mistakes using HTTP responses.
      - httpresponse
      # Detect impossible interface-to-interface type assertions.
      - ifaceassert
      # Check references to loop variables from within nested functions.
      - loopclosure
      # Check cancel func returned by context.WithCancel is called.
      - lostcancel
      # Check for useless comparisons between functions and nil.
      - nilfunc
      # Check for redundant or impossible nil comparisons.
      - nilness
      # Check consistency of Printf format strings and arguments.
      - printf
      # Check for comparing reflect.Value values with == or reflect.DeepEqual.
      - reflectvaluecompare
      # Check for possible unintended shadowing of variables.
      - shadow
      # Check for shifts that equal or exceed the width of the integer.
      - shift
      # Check for unbuffered channel of os.Signal.
      - sigchanyzer
      # Check for invalid structured logging calls.
      - slog
      # Check the argument type of sort.Slice.
      - sortslice
      # Check signature of methods of well-known interfaces.
      - stdmethods
      # Check for string(int) conversions.
      - stringintconv
      # Check that struct field tags conform to reflect.StructTag.Get.
      - structtag
      # Report calls to (*testing.T).Fatal from goroutines started by a test.
      - testinggoroutine
      # Check for common mistaken usages of tests and examples.
      - tests
      # Check for calls of (time.Time).Format or time.Parse with 2006-02-01.
      - timeformat
      # Report passing non-pointer or non-interface values to unmarshal.
      - unmarshal
      # Check for unreachable code.
      - unreachable
      # Check for invalid conversions of uintptr to unsafe.Pointer.
      - unsafeptr
      # Check for unused results of calls to some functions.
      - unusedresult
      # Checks for unused writes.
      - unusedwrite

    # Enable all analyzers.
    # Default: false
    enable-all: true
    # Disable analyzers by name.
    # (in addition to default
    #   atomicalign, deepequalerrors, fieldalignment, findcall, nilness, reflectvaluecompare, shadow, sortslice,
    #   timeformat, unusedwrite
    # ).
    # Run `GL_DEBUG=govet golangci-lint run --enable=govet` to see default, all available analyzers, and enabled analyzers.
    # Default: []
    disable:
      - appends
      - asmdecl
      - assign
      - atomic
      - atomicalign
      - bools
      - buildtag
      - cgocall
      - composites
      - copylocks
      - deepequalerrors
      - defers
      - directive
      - errorsas
      - fieldalignment
      - findcall
      - framepointer
      - httpresponse
      - ifaceassert
      - loopclosure
      - lostcancel
      - nilfunc
      - nilness
      - printf
      - reflectvaluecompare
      - shadow
      - shift
      - sigchanyzer
      - slog
      - sortslice
      - stdmethods
      - stringintconv
      - structtag
      - testinggoroutine
      - tests
      - timeformat
      - unmarshal
      - unreachable
      - unsafeptr
      - unusedresult
      - unusedwrite

    # Settings per analyzer.
    settings:
      # Analyzer name, run `go tool vet help` to see all analyzers.
      printf:
        # Comma-separated list of print function names to check (in addition to default, see `go tool vet help printf`).
        # Default: []
        funcs:
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Infof
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Warnf
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Errorf
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Fatalf
      shadow:
        # Whether to be strict about shadowing; can be noisy.
        # Default: false
        strict: true
      unusedresult:
        # Comma-separated list of functions whose results must be used
        # (in addition to default:
        #   context.WithCancel, context.WithDeadline, context.WithTimeout, context.WithValue, errors.New, fmt.Errorf,
        #   fmt.Sprint, fmt.Sprintf, sort.Reverse
        # ).
        # Default: []
        funcs:
          - pkg.MyFunc
        # Comma-separated list of names of methods of type func() string whose results must be used
        # (in addition to default Error,String)
        # Default: []
        stringmethods:
          - MyMethod

  grouper:
    # Require the use of a single global 'const' declaration only.
    # Default: false
    const-require-single-const: true
    # Require the use of grouped global 'const' declarations.
    # Default: false
    const-require-grouping: true

    # Require the use of a single 'import' declaration only.
    # Default: false
    import-require-single-import: true
    # Require the use of grouped 'import' declarations.
    # Default: false
    import-require-grouping: true

    # Require the use of a single global 'type' declaration only.
    # Default: false
    type-require-single-type: true
    # Require the use of grouped global 'type' declarations.
    # Default: false
    type-require-grouping: true

    # Require the use of a single global 'var' declaration only.
    # Default: false
    var-require-single-var: true
    # Require the use of grouped global 'var' declarations.
    # Default: false
    var-require-grouping: true

  iface:
    # List of analyzers.
    # Default: ["identical"]
    enable:
      - identical # Identifies interfaces in the same package that have identical method sets.
      - unused # Identifies interfaces that are not used anywhere in the same package where the interface is defined.
      - opaque # Identifies functions that return interfaces, but the actual returned value is always a single concrete implementation.
    settings:
      unused:
        # List of packages path to exclude from the check.
        # Default: []
        exclude:
          - github.com/example/log

  importas:
    # Do not allow unaliased imports of aliased packages.
    # Default: false
    no-unaliased: true
    # Do not allow non-required aliases.
    # Default: false
    no-extra-aliases: true
    # List of aliases
    # Default: []
    alias:
      # Using `servingv1` alias for `knative.dev/serving/pkg/apis/serving/v1` package.
      - pkg: knative.dev/serving/pkg/apis/serving/v1
        alias: servingv1
      # Using `autoscalingv1alpha1` alias for `knative.dev/serving/pkg/apis/autoscaling/v1alpha1` package.
      - pkg: knative.dev/serving/pkg/apis/autoscaling/v1alpha1
        alias: autoscalingv1alpha1
      # You can specify the package path by regular expression,
      # and alias by regular expression expansion syntax like below.
      # see https://github.com/julz/importas#use-regular-expression for details
      - pkg: knative.dev/serving/pkg/apis/(\w+)/(v[\w\d]+)
        alias: $1$2

  inamedparam:
    # Skips check for interface methods with only a single parameter.
    # Default: false
    skip-single-param: true

  interfacebloat:
    # The maximum number of methods allowed for an interface.
    # Default: 10
    max: 5

  ireturn:
    # List of interfaces to allow.
    # Lists of the keywords and regular expressions matched to interface or package names can be used.
    # `allow` and `reject` settings cannot be used at the same time.
    #
    # Keywords:
    # - `empty` for `interface{}`
    # - `error` for errors
    # - `stdlib` for standard library
    # - `anon` for anonymous interfaces
    # - `generic` for generic interfaces added in go 1.18
    #
    # Default: [anon, error, empty, stdlib]
    allow:
      - anon
      # You can specify idiomatic endings for interface
      - (or|er)$

    # List of interfaces to reject.
    # Lists of the keywords and regular expressions matched to interface or package names can be used.
    # `allow` and `reject` settings cannot be used at the same time.
    #
    # Keywords:
    # - `empty` for `interface{}`
    # - `error` for errors
    # - `stdlib` for standard library
    # - `anon` for anonymous interfaces
    # - `generic` for generic interfaces added in go 1.18
    #
    # Default: []
    reject:
      - github.com\/user\/package\/v4\.Type

  lll:
    # Max line length, lines longer will be reported.
    # '\t' is counted as 1 character by default, and can be changed with the tab-width option.
    # Default: 120.
    line-length: 120
    # Tab width in spaces.
    # Default: 1
    tab-width: 1

  loggercheck:
    # Allow check for the github.com/go-kit/log library.
    # Default: true
    kitlog: false
    # Allow check for the k8s.io/klog/v2 library.
    # Default: true
    klog: false
    # Allow check for the github.com/go-logr/logr library.
    # Default: true
    logr: false
    # Allow check for the "sugar logger" from go.uber.org/zap library.
    # Default: true
    zap: false
    # Require all logging keys to be inlined constant strings.
    # Default: false
    require-string-key: true
    # Require printf-like format specifier (%s, %d for example) not present.
    # Default: false
    no-printf-like: true
    # List of custom rules to check against, where each rule is a single logger pattern, useful for wrapped loggers.
    # For example: https://github.com/timonwong/loggercheck/blob/7395ab86595781e33f7afba27ad7b55e6956ebcd/testdata/custom-rules.txt
    # Default: empty
    rules:
      - k8s.io/klog/v2.InfoS   # package level exported functions
      - (github.com/go-logr/logr.Logger).Error  # "Methods"
      - (*go.uber.org/zap.SugaredLogger).With  # Also "Methods", but with a pointer receiver

  maintidx:
    # Show functions with maintainability index lower than N.
    # A high index indicates better maintainability (it's kind of the opposite of complexity).
    # Default: 20
    under: 100

  makezero:
    # Allow only slices initialized with a length of zero.
    # Default: false
    always: true

  misspell:
    # Correct spellings using locale preferences for US or UK.
    # Setting locale to US will correct the British spelling of 'colour' to 'color'.
    # Default is to use a neutral variety of English.
    locale: US
    # Typos to ignore.
    # Should be in lower case.
    # Default: []
    ignore-words:
      - someword
    # Extra word corrections.
    # `typo` and `correction` should only contain letters.
    # The words are case-insensitive.
    # Default: []
    extra-words:
      - typo: "iff"
        correction: "if"
      - typo: "cancelation"
        correction: "cancellation"
    # Mode of the analysis:
    # - default: checks all the file content.
    # - restricted: checks only comments.
    # Default: ""
    mode: restricted

  mnd:
    # List of enabled checks, see https://github.com/tommy-muehle/go-mnd/#checks for description.
    # Default: ["argument", "case", "condition", "operation", "return", "assign"]
    checks:
      - argument
      - case
      - condition
      - operation
      - return
      - assign
    # List of numbers to exclude from analysis.
    # The numbers should be written as string.
    # Values always ignored: "1", "1.0", "0" and "0.0"
    # Default: []
    ignored-numbers:
      - '0666'
      - '0755'
      - '42'
    # List of file patterns to exclude from analysis.
    # Values always ignored: `.+_test.go`
    # Default: []
    ignored-files:
      - 'magic1_.+\.go$'
    # List of function patterns to exclude from analysis.
    # Following functions are always ignored: `time.Date`,
    # `strconv.FormatInt`, `strconv.FormatUint`, `strconv.FormatFloat`,
    # `strconv.ParseInt`, `strconv.ParseUint`, `strconv.ParseFloat`.
    # Default: []
    ignored-functions:
      - '^math\.'
      - '^http\.StatusText$'

  musttag:
    # A set of custom functions to check in addition to the builtin ones.
    # Default: json, xml, gopkg.in/yaml.v3, BurntSushi/toml, mitchellh/mapstructure, jmoiron/sqlx
    functions:
      # The full name of the function, including the package.
      - name: github.com/hashicorp/hcl/v2/hclsimple.DecodeFile
        # The struct tag whose presence should be ensured.
        tag: hcl
        # The position of the argument to check.
        arg-pos: 2

  nakedret:
    # Make an issue if func has more lines of code than this setting, and it has naked returns.
    # Default: 30
    max-func-lines: 31

  nestif:
    # Minimal complexity of if statements to report.
    # Default: 5
    min-complexity: 4

  nilnil:
    # In addition, detect opposite situation (simultaneous return of non-nil error and valid value).
    # Default: false
    detect-opposite: true
    # List of return types to check.
    # Default: ["chan", "func", "iface", "map", "ptr", "uintptr", "unsafeptr"]
    checked-types:
      - chan
      - func
      - iface
      - map
      - ptr
      - uintptr
      - unsafeptr

  nlreturn:
    # Size of the block (including return statement that is still "OK")
    # so no return split required.
    # Default: 1
    block-size: 2

  nolintlint:
    # Disable to ensure that all nolint directives actually have an effect.
    # Default: false
    allow-unused: true
    # Exclude following linters from requiring an explanation.
    # Default: []
    allow-no-explanation: [ ]
    # Enable to require an explanation of nonzero length after each nolint directive.
    # Default: false
    require-explanation: true
    # Enable to require nolint directives to mention the specific linter being suppressed.
    # Default: false
    require-specific: true

  nonamedreturns:
    # Report named error if it is assigned inside defer.
    # Default: false
    report-error-in-defer: true

  paralleltest:
    # Ignore missing calls to `t.Parallel()` and only report incorrect uses of it.
    # Default: false
    ignore-missing: true
    # Ignore missing calls to `t.Parallel()` in subtests. Top-level tests are
    # still required to have `t.Parallel`, but subtests are allowed to skip it.
    # Default: false
    ignore-missing-subtests: true

  perfsprint:
    # Optimizes even if it requires an int or uint type cast.
    # Default: true
    int-conversion: false
    # Optimizes into `err.Error()` even if it is only equivalent for non-nil errors.
    # Default: false
    err-error: true
    # Optimizes `fmt.Errorf`.
    # Default: true
    errorf: false
    # Optimizes `fmt.Sprintf` with only one argument.
    # Default: true
    sprintf1: false
    # Optimizes into strings concatenation.
    # Default: true
    strconcat: false

  prealloc:
    # IMPORTANT: we don't recommend using this linter before doing performance profiling.
    # For most programs usage of prealloc will be a premature optimization.

    # Report pre-allocation suggestions only on simple loops that have no returns/breaks/continues/gotos in them.
    # Default: true
    simple: false
    # Report pre-allocation suggestions on range loops.
    # Default: true
    range-loops: false
    # Report pre-allocation suggestions on for loops.
    # Default: false
    for-loops: true

  predeclared:
    # Comma-separated list of predeclared identifiers to not report on.
    # Default: ""
    ignore: "new,int"
    # Include method names and field names (i.e., qualified names) in checks.
    # Default: false
    q: true

  promlinter:
    # Promlinter cannot infer all metrics name in static analysis.
    # Enable strict mode will also include the errors caused by failing to parse the args.
    # Default: false
    strict: true
    # Please refer to https://github.com/yeya24/promlinter#usage for detailed usage.
    # Default: []
    disabled-linters:
      # Help detects issues related to the help text for a metric.
      - Help
      # MetricUnits detects issues with metric unit names.
      - MetricUnits
      # Counter detects issues specific to counters, as well as patterns that should only be used with counters.
      - Counter
      # HistogramSummaryReserved detects when other types of metrics use names or labels reserved for use by histograms and/or summaries.
      - HistogramSummaryReserved
      # MetricTypeInName detects when metric types are included in the metric name.
      - MetricTypeInName
      # ReservedChars detects colons in metric names.
      - ReservedChars
      # CamelCase detects metric names and label names written in camelCase.
      - CamelCase
      # UnitAbbreviations detects abbreviated units in the metric name.
      - UnitAbbreviations


  protogetter:
    # Skip files generated by specified generators from the checking.
    # Checks only the file's initial comment, which must follow the format: "// Code generated by <generator-name>".
    # Files generated by protoc-gen-go, protoc-gen-go-grpc, and protoc-gen-grpc-gateway are always excluded automatically.
    # Default: []
    skip-generated-by: ["protoc-gen-go-my-own-generator"]
    # Skip files matching the specified glob pattern from the checking.
    # Default: []
    skip-files:
      - "*.pb.go"
      - "*/vendor/*"
      - "/full/path/to/file.go"
    # Skip any generated files from the checking.
    # Default: false
    skip-any-generated: true
    # Skip first argument of append function.
    # Default: false
    replace-first-arg-in-append: true

  reassign:
    # Patterns for global variable names that are checked for reassignment.
    # See https://github.com/curioswitch/go-reassign#usage
    # Default: ["EOF", "Err.*"]
    patterns:
      - ".*"

  revive:
    # Maximum number of open files at the same time.
    # See https://github.com/mgechev/revive#command-line-flags
    # Defaults to unlimited.
    max-open-files: 2048

    # When set to false, ignores files with "GENERATED" header, similar to golint.
    # See https://github.com/mgechev/revive#available-rules for details.
    # Default: false
    ignore-generated-header: true

    # Sets the default severity.
    # See https://github.com/mgechev/revive#configuration
    # Default: warning
    severity: error

    # Enable all available rules.
    # Default: false
    enable-all-rules: true

    # Sets the default failure confidence.
    # This means that linting errors with less than 0.8 confidence will be ignored.
    # Default: 0.8
    confidence: 0.1

    rules:
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#add-constant
      - name: add-constant
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - maxLitCount: "3"
            allowStrs: '""'
            allowInts: "0,1,2"
            allowFloats: "0.0,0.,1.0,1.,2.0,2."
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#argument-limit
      - name: argument-limit
        severity: warning
        disabled: false
        exclude: [""]
        arguments: [ 4 ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#atomic
      - name: atomic
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#banned-characters
      - name: banned-characters
        severity: warning
        disabled: false
        exclude: [""]
        arguments: [ "Ω","Σ","σ", "7" ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#bare-return
      - name: bare-return
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#blank-imports
      - name: blank-imports
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#bool-literal-in-expr
      - name: bool-literal-in-expr
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#call-to-gc
      - name: call-to-gc
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#cognitive-complexity
      - name: cognitive-complexity
        severity: warning
        disabled: false
        exclude: [""]
        arguments: [ 7 ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#comment-spacings
      - name: comment-spacings
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - mypragma
          - otherpragma
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#comments-density
      - name: comments-density
        severity: warning
        disabled: false
        exclude: [""]
        arguments: [ 15 ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#confusing-naming
      - name: confusing-naming
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#confusing-results
      - name: confusing-results
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#constant-logical-expr
      - name: constant-logical-expr
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#context-as-argument
      - name: context-as-argument
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - allowTypesBefore: "*testing.T,*github.com/user/repo/testing.Harness"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#context-keys-type
      - name: context-keys-type
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#cyclomatic
      - name: cyclomatic
        severity: warning
        disabled: false
        exclude: [""]
        arguments: [ 3 ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#datarace
      - name: datarace
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#deep-exit
      - name: deep-exit
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#defer
      - name: defer
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - [ "call-chain", "loop" ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#dot-imports
      - name: dot-imports
        severity: warning
        disabled: false
        exclude: [""]
        arguments: [ ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#duplicated-imports
      - name: duplicated-imports
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#early-return
      - name: early-return
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - "preserveScope"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#empty-block
      - name: empty-block
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#empty-lines
      - name: empty-lines
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#enforce-map-style
      - name: enforce-map-style
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - "make"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#enforce-repeated-arg-type-style
      - name: enforce-repeated-arg-type-style
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - "short"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#enforce-slice-style
      - name: enforce-slice-style
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - "make"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#error-naming
      - name: error-naming
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#error-return
      - name: error-return
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#error-strings
      - name: error-strings
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#errorf
      - name: errorf
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#exported
      - name: exported
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - "preserveScope"
          - "checkPrivateReceivers"
          - "sayRepetitiveInsteadOfStutters"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#file-header
      - name: file-header
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - This is the text that must appear at the top of source files.
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#flag-parameter
      - name: flag-parameter
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#function-length
      - name: function-length
        severity: warning
        disabled: false
        exclude: [""]
        arguments: [ 10, 0 ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#function-result-limit
      - name: function-result-limit
        severity: warning
        disabled: false
        exclude: [""]
        arguments: [ 3 ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#get-return
      - name: get-return
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#identical-branches
      - name: identical-branches
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#if-return
      - name: if-return
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#import-alias-naming
      - name: import-alias-naming
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - "^[a-z][a-z0-9]{0,}$"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#import-shadowing
      - name: import-shadowing
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#imports-blocklist
      - name: imports-blocklist
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - "crypto/md5"
          - "crypto/sha1"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#increment-decrement
      - name: increment-decrement
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#indent-error-flow
      - name: indent-error-flow
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - "preserveScope"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#line-length-limit
      - name: line-length-limit
        severity: warning
        disabled: false
        exclude: [""]
        arguments: [ 80 ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#max-control-nesting
      - name: max-control-nesting
        severity: warning
        disabled: false
        exclude: [""]
        arguments: [ 3 ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#max-public-structs
      - name: max-public-structs
        severity: warning
        disabled: false
        exclude: [""]
        arguments: [ 3 ]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#modifies-parameter
      - name: modifies-parameter
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#modifies-value-receiver
      - name: modifies-value-receiver
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#nested-structs
      - name: nested-structs
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#optimize-operands-order
      - name: optimize-operands-order
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#package-comments
      - name: package-comments
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#range
      - name: range
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#range-val-address
      - name: range-val-address
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#range-val-in-closure
      - name: range-val-in-closure
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#receiver-naming
      - name: receiver-naming
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#redefines-builtin-id
      - name: redefines-builtin-id
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#redundant-import-alias
      - name: redundant-import-alias
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#string-format
      - name: string-format
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - - 'core.WriteError[1].Message'
            - '/^([^A-Z]|$)/'
            - must not start with a capital letter
          - - 'fmt.Errorf[0]'
            - '/(^|[^\.!?])$/'
            - must not end in punctuation
          - - panic
            - '/^[^\n]*$/'
            - must not contain line breaks
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#string-of-int
      - name: string-of-int
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#struct-tag
      - name: struct-tag
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - "json,inline"
          - "bson,outline,gnu"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#superfluous-else
      - name: superfluous-else
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - "preserveScope"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#time-equal
      - name: time-equal
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#time-naming
      - name: time-naming
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#unchecked-type-assertion
      - name: unchecked-type-assertion
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - acceptIgnoredAssertionResult: true
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#unconditional-recursion
      - name: unconditional-recursion
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#unexported-naming
      - name: unexported-naming
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#unexported-return
      - name: unexported-return
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#unhandled-error
      - name: unhandled-error
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - "fmt.Printf"
          - "myFunction"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#unnecessary-stmt
      - name: unnecessary-stmt
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#unreachable-code
      - name: unreachable-code
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#unused-parameter
      - name: unused-parameter
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - allowRegex: "^_"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#unused-receiver
      - name: unused-receiver
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - allowRegex: "^_"
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#use-any
      - name: use-any
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#useless-break
      - name: useless-break
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#var-declaration
      - name: var-declaration
        severity: warning
        disabled: false
        exclude: [""]
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#var-naming
      - name: var-naming
        severity: warning
        disabled: false
        exclude: [""]
        arguments:
          - [ "ID" ] # AllowList
          - [ "VM" ] # DenyList
          - - upperCaseConst: true # Extra parameter (upperCaseConst|skipPackageNameChecks)
      # https://github.com/mgechev/revive/blob/master/RULES_DESCRIPTIONS.md#waitgroup-by-value
      - name: waitgroup-by-value
        severity: warning
        disabled: false
        exclude: [""]

  rowserrcheck:
    # database/sql is always checked
    # Default: []
    packages:
      - github.com/jmoiron/sqlx

  sloglint:
    # Enforce not mixing key-value pairs and attributes.
    # https://github.com/go-simpler/sloglint?tab=readme-ov-file#no-mixed-arguments
    # Default: true
    no-mixed-args: false
    # Enforce using key-value pairs only (overrides no-mixed-args, incompatible with attr-only).
    # https://github.com/go-simpler/sloglint?tab=readme-ov-file#key-value-pairs-only
    # Default: false
    kv-only: true
    # Enforce using attributes only (overrides no-mixed-args, incompatible with kv-only).
    # https://github.com/go-simpler/sloglint?tab=readme-ov-file#attributes-only
    # Default: false
    attr-only: true
    # Enforce not using global loggers.
    # Values:
    # - "": disabled
    # - "all": report all global loggers
    # - "default": report only the default slog logger
    # https://github.com/go-simpler/sloglint?tab=readme-ov-file#no-global
    # Default: ""
    no-global: "all"
    # Enforce using methods that accept a context.
    # Values:
    # - "": disabled
    # - "all": report all contextless calls
    # - "scope": report only if a context exists in the scope of the outermost function
    # https://github.com/go-simpler/sloglint?tab=readme-ov-file#context-only
    # Default: ""
    context: "all"
    # Enforce using static values for log messages.
    # https://github.com/go-simpler/sloglint?tab=readme-ov-file#static-messages
    # Default: false
    static-msg: true
    # Enforce using constants instead of raw keys.
    # https://github.com/go-simpler/sloglint?tab=readme-ov-file#no-raw-keys
    # Default: false
    no-raw-keys: true
    # Enforce a single key naming convention.
    # Values: snake, kebab, camel, pascal
    # https://github.com/go-simpler/sloglint?tab=readme-ov-file#key-naming-convention
    # Default: ""
    key-naming-case: snake
    # Enforce not using specific keys.
    # Default: []
    forbidden-keys:
      - time
      - level
      - msg
      - source
      - foo
    # Enforce putting arguments on separate lines.
    # https://github.com/go-simpler/sloglint?tab=readme-ov-file#forbidden-keys
    # Default: false
    args-on-sep-lines: true

  spancheck:
    # Checks to enable.
    # Options include:
    # - `end`: check that `span.End()` is called
    # - `record-error`: check that `span.RecordError(err)` is called when an error is returned
    # - `set-status`: check that `span.SetStatus(codes.Error, msg)` is called when an error is returned
    # Default: ["end"]
    checks:
      - end
      - record-error
      - set-status
    # A list of regexes for function signatures that silence `record-error` and `set-status` reports
    # if found in the call path to a returned error.
    # https://github.com/jjti/go-spancheck#ignore-check-signatures
    # Default: []
    ignore-check-signatures:
      - "telemetry.RecordError"
    # A list of regexes for additional function signatures that create spans.
    # This is useful if you have a utility method to create spans.
    # Each entry should be of the form `<regex>:<telemetry-type>`, where `telemetry-type` can be `opentelemetry` or `opencensus`.
    # https://github.com/jjti/go-spancheck#extra-start-span-signatures
    # Default: []
    extra-start-span-signatures:
      - "github.com/user/repo/telemetry/trace.Start:opentelemetry"
  staticcheck:
    # SAxxxx checks in https://staticcheck.io/docs/configuration/options/#checks
    # Example (to disable some checks): [ "all", "-SA1000", "-SA1001"]
    # Default: ["*"]
    checks:
      # Invalid regular expression.
      # https://staticcheck.dev/docs/checks/#SA1000
      - SA1000
      # Invalid template.
      # https://staticcheck.dev/docs/checks/#SA1001
      - SA1001
      # Invalid format in 'time.Parse'.
      # https://staticcheck.dev/docs/checks/#SA1002
      - SA1002
      # Unsupported argument to functions in 'encoding/binary'.
      # https://staticcheck.dev/docs/checks/#SA1003
      - SA1003
      # Suspiciously small untyped constant in 'time.Sleep'.
      # https://staticcheck.dev/docs/checks/#SA1004
      - SA1004
      # Invalid first argument to 'exec.Command'.
      # https://staticcheck.dev/docs/checks/#SA1005
      - SA1005
      # 'Printf' with dynamic first argument and no further arguments.
      # https://staticcheck.dev/docs/checks/#SA1006
      - SA1006
      # Invalid URL in 'net/url.Parse'.
      # https://staticcheck.dev/docs/checks/#SA1007
      - SA1007
      # Non-canonical key in 'http.Header' map.
      # https://staticcheck.dev/docs/checks/#SA1008
      - SA1008
      # '(*regexp.Regexp).FindAll' called with 'n == 0', which will always return zero results.
      # https://staticcheck.dev/docs/checks/#SA1010
      - SA1010
      # Various methods in the "strings" package expect valid UTF-8, but invalid input is provided.
      # https://staticcheck.dev/docs/checks/#SA1011
      - SA1011
      # A nil 'context.Context' is being passed to a function, consider using 'context.TODO' instead.
      # https://staticcheck.dev/docs/checks/#SA1012
      - SA1012
      # 'io.Seeker.Seek' is being called with the whence constant as the first argument, but it should be the second.
      # https://staticcheck.dev/docs/checks/#SA1013
      - SA1013
      # Non-pointer value passed to 'Unmarshal' or 'Decode'.
      # https://staticcheck.dev/docs/checks/#SA1014
      - SA1014
      # Using 'time.Tick' in a way that will leak. Consider using 'time.NewTicker', and only use 'time.Tick' in tests, commands and endless functions.
      # https://staticcheck.dev/docs/checks/#SA1015
      - SA1015
      # Trapping a signal that cannot be trapped.
      # https://staticcheck.dev/docs/checks/#SA1016
      - SA1016
      # Channels used with 'os/signal.Notify' should be buffered.
      # https://staticcheck.dev/docs/checks/#SA1017
      - SA1017
      # 'strings.Replace' called with 'n == 0', which does nothing.
      # https://staticcheck.dev/docs/checks/#SA1018
      - SA1018
      # Using a deprecated function, variable, constant or field.
      # https://staticcheck.dev/docs/checks/#SA1019
      - SA1019
      # Using an invalid host:port pair with a 'net.Listen'-related function.
      # https://staticcheck.dev/docs/checks/#SA1020
      - SA1020
      # Using 'bytes.Equal' to compare two 'net.IP'.
      # https://staticcheck.dev/docs/checks/#SA1021
      - SA1021
      # Modifying the buffer in an 'io.Writer' implementation.
      # https://staticcheck.dev/docs/checks/#SA1023
      - SA1023
      # A string cutset contains duplicate characters.
      # https://staticcheck.dev/docs/checks/#SA1024
      - SA1024
      # It is not possible to use '(*time.Timer).Reset''s return value correctly.
      # https://staticcheck.dev/docs/checks/#SA1025
      - SA1025
      # Cannot marshal channels or functions.
      # https://staticcheck.dev/docs/checks/#SA1026
      - SA1026
      # Atomic access to 64-bit variable must be 64-bit aligned.
      # https://staticcheck.dev/docs/checks/#SA1027
      - SA1027
      # 'sort.Slice' can only be used on slices.
      # https://staticcheck.dev/docs/checks/#SA1028
      - SA1028
      # Inappropriate key in call to 'context.WithValue'.
      # https://staticcheck.dev/docs/checks/#SA1029
      - SA1029
      # Invalid argument in call to a 'strconv' function.
      # https://staticcheck.dev/docs/checks/#SA1030
      - SA1030
      # Overlapping byte slices passed to an encoder.
      # https://staticcheck.dev/docs/checks/#SA1031
      - SA1031
      # Wrong order of arguments to 'errors.Is'.
      # https://staticcheck.dev/docs/checks/#SA1032
      - SA1032
      # 'sync.WaitGroup.Add' called inside the goroutine, leading to a race condition.
      # https://staticcheck.dev/docs/checks/#SA2000
      - SA2000
      # Empty critical section, did you mean to defer the unlock?.
      # https://staticcheck.dev/docs/checks/#SA2001
      - SA2001
      # Called 'testing.T.FailNow' or 'SkipNow' in a goroutine, which isn't allowed.
      # https://staticcheck.dev/docs/checks/#SA2002
      - SA2002
      # Deferred 'Lock' right after locking, likely meant to defer 'Unlock' instead.
      # https://staticcheck.dev/docs/checks/#SA2003
      - SA2003
      # 'TestMain' doesn't call 'os.Exit', hiding test failures.
      # https://staticcheck.dev/docs/checks/#SA3000
      - SA3000
      # Assigning to 'b.N' in benchmarks distorts the results.
      # https://staticcheck.dev/docs/checks/#SA3001
      - SA3001
      # Binary operator has identical expressions on both sides.
      # https://staticcheck.dev/docs/checks/#SA4000
      - SA4000
      # '&*x' gets simplified to 'x', it does not copy 'x'.
      # https://staticcheck.dev/docs/checks/#SA4001
      - SA4001
      # Comparing unsigned values against negative values is pointless.
      # https://staticcheck.dev/docs/checks/#SA4003
      - SA4003
      # The loop exits unconditionally after one iteration.
      # https://staticcheck.dev/docs/checks/#SA4004
      - SA4004
      # Field assignment that will never be observed. Did you mean to use a pointer receiver?.
      # https://staticcheck.dev/docs/checks/#SA4005
      - SA4005
      # A value assigned to a variable is never read before being overwritten. Forgotten error check or dead code?.
      # https://staticcheck.dev/docs/checks/#SA4006
      - SA4006
      # The variable in the loop condition never changes, are you incrementing the wrong variable?.
      # https://staticcheck.dev/docs/checks/#SA4008
      - SA4008
      # A function argument is overwritten before its first use.
      # https://staticcheck.dev/docs/checks/#SA4009
      - SA4009
      # The result of 'append' will never be observed anywhere.
      # https://staticcheck.dev/docs/checks/#SA4010
      - SA4010
      # Break statement with no effect. Did you mean to break out of an outer loop?.
      # https://staticcheck.dev/docs/checks/#SA4011
      - SA4011
      # Comparing a value against NaN even though no value is equal to NaN.
      # https://staticcheck.dev/docs/checks/#SA4012
      - SA4012
      # Negating a boolean twice ('!!b') is the same as writing 'b'. This is either redundant, or a typo.
      # https://staticcheck.dev/docs/checks/#SA4013
      - SA4013
      # An if/else if chain has repeated conditions and no side-effects; if the condition didn't match the first time, it won't match the second time, either.
      # https://staticcheck.dev/docs/checks/#SA4014
      - SA4014
      # Calling functions like 'math.Ceil' on floats converted from integers doesn't do anything useful.
      # https://staticcheck.dev/docs/checks/#SA4015
      - SA4015
      # Certain bitwise operations, such as 'x ^ 0', do not do anything useful.
      # https://staticcheck.dev/docs/checks/#SA4016
      - SA4016
      # Discarding the return values of a function without side effects, making the call pointless.
      # https://staticcheck.dev/docs/checks/#SA4017
      - SA4017
      # Self-assignment of variables.
      # https://staticcheck.dev/docs/checks/#SA4018
      - SA4018
      # Multiple, identical build constraints in the same file.
      # https://staticcheck.dev/docs/checks/#SA4019
      - SA4019
      # Unreachable case clause in a type switch.
      # https://staticcheck.dev/docs/checks/#SA4020
      - SA4020
      # "x = append(y)" is equivalent to "x = y".
      # https://staticcheck.dev/docs/checks/#SA4021
      - SA4021
      # Comparing the address of a variable against nil.
      # https://staticcheck.dev/docs/checks/#SA4022
      - SA4022
      # Impossible comparison of interface value with untyped nil.
      # https://staticcheck.dev/docs/checks/#SA4023
      - SA4023
      # Checking for impossible return value from a builtin function.
      # https://staticcheck.dev/docs/checks/#SA4024
      - SA4024
      # Integer division of literals that results in zero.
      # https://staticcheck.dev/docs/checks/#SA4025
      - SA4025
      # Go constants cannot express negative zero.
      # https://staticcheck.dev/docs/checks/#SA4026
      - SA4026
      # '(*net/url.URL).Query' returns a copy, modifying it doesn't change the URL.
      # https://staticcheck.dev/docs/checks/#SA4027
      - SA4027
      # 'x % 1' is always zero.
      # https://staticcheck.dev/docs/checks/#SA4028
      - SA4028
      # Ineffective attempt at sorting slice.
      # https://staticcheck.dev/docs/checks/#SA4029
      - SA4029
      # Ineffective attempt at generating random number.
      # https://staticcheck.dev/docs/checks/#SA4030
      - SA4030
      # Checking never-nil value against nil.
      # https://staticcheck.dev/docs/checks/#SA4031
      - SA4031
      # Comparing 'runtime.GOOS' or 'runtime.GOARCH' against impossible value.
      # https://staticcheck.dev/docs/checks/#SA4032
      - SA4032
      # Assignment to nil map.
      # https://staticcheck.dev/docs/checks/#SA5000
      - SA5000
      # Deferring 'Close' before checking for a possible error.
      # https://staticcheck.dev/docs/checks/#SA5001
      - SA5001
      # The empty for loop ("for {}") spins and can block the scheduler.
      # https://staticcheck.dev/docs/checks/#SA5002
      - SA5002
      # Defers in infinite loops will never execute.
      # https://staticcheck.dev/docs/checks/#SA5003
      - SA5003
      # "for { select { ..." with an empty default branch spins.
      # https://staticcheck.dev/docs/checks/#SA5004
      - SA5004
      # The finalizer references the finalized object, preventing garbage collection.
      # https://staticcheck.dev/docs/checks/#SA5005
      - SA5005
      # Infinite recursive call.
      # https://staticcheck.dev/docs/checks/#SA5007
      - SA5007
      # Invalid struct tag.
      # https://staticcheck.dev/docs/checks/#SA5008
      - SA5008
      # Invalid Printf call.
      # https://staticcheck.dev/docs/checks/#SA5009
      - SA5009
      # Impossible type assertion.
      # https://staticcheck.dev/docs/checks/#SA5010
      - SA5010
      # Possible nil pointer dereference.
      # https://staticcheck.dev/docs/checks/#SA5011
      - SA5011
      # Passing odd-sized slice to function expecting even size.
      # https://staticcheck.dev/docs/checks/#SA5012
      - SA5012
      # Using 'regexp.Match' or related in a loop, should use 'regexp.Compile'.
      # https://staticcheck.dev/docs/checks/#SA6000
      - SA6000
      # Missing an optimization opportunity when indexing maps by byte slices.
      # https://staticcheck.dev/docs/checks/#SA6001
      - SA6001
      # Storing non-pointer values in 'sync.Pool' allocates memory.
      # https://staticcheck.dev/docs/checks/#SA6002
      - SA6002
      # Converting a string to a slice of runes before ranging over it.
      # https://staticcheck.dev/docs/checks/#SA6003
      - SA6003
      # Inefficient string comparison with 'strings.ToLower' or 'strings.ToUpper'.
      # https://staticcheck.dev/docs/checks/#SA6005
      - SA6005
      # Using io.WriteString to write '[]byte'.
      # https://staticcheck.dev/docs/checks/#SA6006
      - SA6006
      # Defers in range loops may not run when you expect them to.
      # https://staticcheck.dev/docs/checks/#SA9001
      - SA9001
      # Using a non-octal 'os.FileMode' that looks like it was meant to be in octal.
      # https://staticcheck.dev/docs/checks/#SA9002
      - SA9002
      # Empty body in an if or else branch.
      # https://staticcheck.dev/docs/checks/#SA9003
      - SA9003
      # Only the first constant has an explicit type.
      # https://staticcheck.dev/docs/checks/#SA9004
      - SA9004
      # Trying to marshal a struct with no public fields nor custom marshaling.
      # https://staticcheck.dev/docs/checks/#SA9005
      - SA9005
      # Dubious bit shifting of a fixed size integer value.
      # https://staticcheck.dev/docs/checks/#SA9006
      - SA9006
      # Deleting a directory that shouldn't be deleted.
      # https://staticcheck.dev/docs/checks/#SA9007
      - SA9007
      # 'else' branch of a type assertion is probably not reading the right value.
      # https://staticcheck.dev/docs/checks/#SA9008
      - SA9008
      # Ineffectual Go compiler directive.
      # https://staticcheck.dev/docs/checks/#SA9009
      - SA9009

  stylecheck:
    # https://staticcheck.io/docs/configuration/options/#dot_import_whitelist
    # Default: ["github.com/mmcloughlin/avo/build", "github.com/mmcloughlin/avo/operand", "github.com/mmcloughlin/avo/reg"]
    dot-import-whitelist:
      - fmt
    # https://staticcheck.io/docs/configuration/options/#initialisms
    # Default: ["ACL", "API", "ASCII", "CPU", "CSS", "DNS", "EOF", "GUID", "HTML", "HTTP", "HTTPS", "ID", "IP", "JSON", "QPS", "RAM", "RPC", "SLA", "SMTP", "SQL", "SSH", "TCP", "TLS", "TTL", "UDP", "UI", "GID", "UID", "UUID", "URI", "URL", "UTF8", "VM", "XML", "XMPP", "XSRF", "XSS", "SIP", "RTP", "AMQP", "DB", "TS"]
    initialisms: [ "ACL", "API", "ASCII", "CPU", "CSS", "DNS", "EOF", "GUID", "HTML", "HTTP", "HTTPS", "ID", "IP", "JSON", "QPS", "RAM", "RPC", "SLA", "SMTP", "SQL", "SSH", "TCP", "TLS", "TTL", "UDP", "UI", "GID", "UID", "UUID", "URI", "URL", "UTF8", "VM", "XML", "XMPP", "XSRF", "XSS", "SIP", "RTP", "AMQP", "DB", "TS" ]
    # https://staticcheck.io/docs/configuration/options/#http_status_code_whitelist
    # Default: ["200", "400", "404", "500"]
    http-status-code-whitelist: [ "200", "400", "404", "500" ]
    # STxxxx checks in https://staticcheck.io/docs/configuration/options/#checks
    # Example (to disable some checks): [ "all", "-ST1000", "-ST1003", "-ST1016", "-ST1020", "-ST1021", "-ST1022" ]
    # Default: ["*"]
    checks:
      # Incorrect or missing package comment.
      # https://staticcheck.dev/docs/checks/#ST1000
      - ST1000
      # Dot imports are discouraged.
      # https://staticcheck.dev/docs/checks/#ST1001
      - ST1001
      # Poorly chosen identifier.
      # https://staticcheck.dev/docs/checks/#ST1003
      - ST1003
      # Incorrectly formatted error string.
      # https://staticcheck.dev/docs/checks/#ST1005
      - ST1005
      # Poorly chosen receiver name.
      # https://staticcheck.dev/docs/checks/#ST1006
      - ST1006
      # A function's error value should be its last return value.
      # https://staticcheck.dev/docs/checks/#ST1008
      - ST1008
      # Poorly chosen name for variable of type 'time.Duration'.
      # https://staticcheck.dev/docs/checks/#ST1011
      - ST1011
      # Poorly chosen name for error variable.
      # https://staticcheck.dev/docs/checks/#ST1012
      - ST1012
      # Should use constants for HTTP error codes, not magic numbers.
      # https://staticcheck.dev/docs/checks/#ST1013
      - ST1013
      # A switch's default case should be the first or last case.
      # https://staticcheck.dev/docs/checks/#ST1015
      - ST1015
      # Use consistent method receiver names.
      # https://staticcheck.dev/docs/checks/#ST1016
      - ST1016
      # Don't use Yoda conditions.
      # https://staticcheck.dev/docs/checks/#ST1017
      - ST1017
      # Avoid zero-width and control characters in string literals.
      # https://staticcheck.dev/docs/checks/#ST1018
      - ST1018
      # Importing the same package multiple times.
      # https://staticcheck.dev/docs/checks/#ST1019
      - ST1019
      # The documentation of an exported function should start with the function's name.
      # https://staticcheck.dev/docs/checks/#ST1020
      - ST1020
      # The documentation of an exported type should start with type's name.
      # https://staticcheck.dev/docs/checks/#ST1021
      - ST1021
      # The documentation of an exported variable or constant should start with variable's name.
      # https://staticcheck.dev/docs/checks/#ST1022
      - ST1022
      # Redundant type in variable declaration.
      # https://staticcheck.dev/docs/checks/#ST1023
      - ST1023

  tagalign:
    # Align and sort can be used together or separately.
    #
    # Whether enable align. If true, the struct tags will be aligned.
    # e.g.:
    # type FooBar struct {
    #     Bar    string `json:"bar" validate:"required"`
    #     FooFoo int8   `json:"foo_foo" validate:"required"`
    # }
    # will be formatted to:
    # type FooBar struct {
    #     Bar    string `json:"bar"     validate:"required"`
    #     FooFoo int8   `json:"foo_foo" validate:"required"`
    # }
    # Default: true.
    align: false
    # Whether enable tags sort.
    # If true, the tags will be sorted by name in ascending order.
    # e.g.: `xml:"bar" json:"bar" validate:"required"` -> `json:"bar" validate:"required" xml:"bar"`
    # Default: true
    sort: false
    # Specify the order of tags, the other tags will be sorted by name.
    # This option will be ignored if `sort` is false.
    # Default: []
    order:
      - json
      - yaml
      - yml
      - toml
      - mapstructure
      - binding
      - validate
    # Whether enable strict style.
    # In this style, the tags will be sorted and aligned in the dictionary order,
    # and the tags with the same name will be aligned together.
    # Note: This option will be ignored if 'align' or 'sort' is false.
    # Default: false
    strict: true

  tagliatelle:
    # Check the struct tag name case.
    case:
      # Use the struct field name to check the name of the struct tag.
      # Default: false
      use-field-name: true
      # `camel` is used for `json` and `yaml`, and `header` is used for `header` (can be overridden)
      # Default: {}
      rules:
        # Any struct tag type can be used.
        # Support string case: `camel`, `pascal`, `kebab`, `snake`, `upperSnake`, `goCamel`, `goPascal`, `goKebab`, `goSnake`, `upper`, `lower`, `header`
        json: camel
        yaml: camel
        xml: camel
        toml: camel
        bson: camel
        avro: snake
        mapstructure: kebab
        env: upperSnake
        envconfig: upperSnake

  tenv:
    # The option `all` will run against whole test files (`_test.go`) regardless of method/function signatures.
    # Otherwise, only methods that take `*testing.T`, `*testing.B`, and `testing.TB` as arguments are checked.
    # Default: false
    all: false

  testifylint:
    # Enable all checkers (https://github.com/Antonboom/testifylint#checkers).
    # Default: false
    enable-all: true
    # Disable checkers by name
    # (in addition to default
    #   suite-thelper
    # ).
    disable:
      - blank-import
      - bool-compare
      - compares
      - contains
      - empty
      - encoded-compare
      - error-is-as
      - error-nil
      - expected-actual
      - float-compare
      - formatter
      - go-require
      - len
      - negative-positive
      - nil-compare
      - regexp
      - require-error
      - suite-broken-parallel
      - suite-dont-use-pkg
      - suite-extra-assert-call
      - suite-subtest-run
      - suite-thelper
      - useless-assert

    # Disable all checkers (https://github.com/Antonboom/testifylint#checkers).
    # Default: false
    disable-all: true
    # Enable checkers by name
    # (in addition to default
    #   blank-import, bool-compare, compares, contains, empty, encoded-compare, error-is-as, error-nil, expected-actual,
    #   go-require, float-compare, formatter, len, negative-positive, nil-compare, regexp, require-error,
    #   suite-broken-parallel, suite-dont-use-pkg, suite-extra-assert-call, suite-subtest-run, useless-assert
    # ).
    enable:
      - blank-import
      - bool-compare
      - compares
      - contains
      - empty
      - encoded-compare
      - error-is-as
      - error-nil
      - expected-actual
      - float-compare
      - formatter
      - go-require
      - len
      - negative-positive
      - nil-compare
      - regexp
      - require-error
      - suite-broken-parallel
      - suite-dont-use-pkg
      - suite-extra-assert-call
      - suite-subtest-run
      - suite-thelper
      - useless-assert

    bool-compare:
      # To ignore user defined types (over builtin bool).
      # Default: false
      ignore-custom-types: true
    expected-actual:
      # Regexp for expected variable name.
      # Default: (^(exp(ected)?|want(ed)?)([A-Z]\w*)?$)|(^(\w*[a-z])?(Exp(ected)?|Want(ed)?)$)
      pattern: ^expected
    formatter:
      # To enable go vet's printf checks.
      # Default: true
      check-format-string: false
      # To require f-assertions if format string is used.
      # Default: false
      require-f-funcs: true
    go-require:
      # To ignore HTTP handlers (like http.HandlerFunc).
      # Default: false
      ignore-http-handlers: true
    require-error:
      # Regexp for assertions to analyze. If defined, then only matched error assertions will be reported.
      # Default: ""
      fn-pattern: ^(Errorf?|NoErrorf?)$
    suite-extra-assert-call:
      # To require or remove extra Assert() call?
      # Default: remove
      mode: require

  testpackage:
    # Regexp pattern to skip files.
    # Default: "(export|internal)_test\\.go"
    skip-regexp: (export|internal)_test\.go
    # List of packages that don't end with _test that tests are allowed to be in.
    # Default: "main"
    allow-packages:
      - example
      - main

  thelper:
    test:
      # Check *testing.T is first param (or after context.Context) of helper function.
      # Default: true
      first: false
      # Check *testing.T param has name t.
      # Default: true
      name: false
      # Check t.Helper() begins helper function.
      # Default: true
      begin: false
    benchmark:
      # Check *testing.B is first param (or after context.Context) of helper function.
      # Default: true
      first: false
      # Check *testing.B param has name b.
      # Default: true
      name: false
      # Check b.Helper() begins helper function.
      # Default: true
      begin: false
    tb:
      # Check *testing.TB is first param (or after context.Context) of helper function.
      # Default: true
      first: false
      # Check *testing.TB param has name tb.
      # Default: true
      name: false
      # Check tb.Helper() begins helper function.
      # Default: true
      begin: false
    fuzz:
      # Check *testing.F is first param (or after context.Context) of helper function.
      # Default: true
      first: false
      # Check *testing.F param has name f.
      # Default: true
      name: false
      # Check f.Helper() begins helper function.
      # Default: true
      begin: false

  usestdlibvars:
    # Suggest the use of http.MethodXX.
    # Default: true
    http-method: false
    # Suggest the use of http.StatusXX.
    # Default: true
    http-status-code: false
    # Suggest the use of time.Weekday.String().
    # Default: true
    time-weekday: true
    # Suggest the use of time.Month.String().
    # Default: false
    time-month: true
    # Suggest the use of time.Layout.
    # Default: false
    time-layout: true
    # Suggest the use of crypto.Hash.String().
    # Default: false
    crypto-hash: true
    # Suggest the use of rpc.DefaultXXPath.
    # Default: false
    default-rpc-path: true
    # Suggest the use of sql.LevelXX.String().
    # Default: false
    sql-isolation-level: true
    # Suggest the use of tls.SignatureScheme.String().
    # Default: false
    tls-signature-scheme: true
    # Suggest the use of constant.Kind.String().
    # Default: false
    constant-kind: true

  unconvert:
    # Remove conversions that force intermediate rounding.
    # Default: false
    fast-math: true
    # Be more conservative (experimental).
    # Default: false
    safe: true

  unparam:
    # Inspect exported functions.
    #
    # Set to true if no external program/library imports your code.
    # XXX: if you enable this setting, unparam will report a lot of false-positives in text editors:
    # if it's called for subdir of a project it can't find external interfaces. All text editor integrations
    # with golangci-lint call it on a directory with the changed file.
    #
    # Default: false
    check-exported: true

  unused:
    # Mark all struct fields that have been written to as used.
    # Default: true
    field-writes-are-uses: false
    # Treat IncDec statement (e.g. `i++` or `i--`) as both read and write operation instead of just write.
    # Default: false
    post-statements-are-reads: true
    # Mark all exported fields as used.
    # default: true
    exported-fields-are-used: false
    # Mark all function parameters as used.
    # default: true
    parameters-are-used: false
    # Mark all local variables as used.
    # default: true
    local-variables-are-used: false
    # Mark all identifiers inside generated files as used.
    # Default: true
    generated-is-used: false

  varnamelen:
    # The longest distance, in source lines, that is being considered a "small scope".
    # Variables used in at most this many lines will be ignored.
    # Default: 5
    max-distance: 6
    # The minimum length of a variable's name that is considered "long".
    # Variable names that are at least this long will be ignored.
    # Default: 3
    min-name-length: 2
    # Check method receivers.
    # Default: false
    check-receiver: true
    # Check named return values.
    # Default: false
    check-return: true
    # Check type parameters.
    # Default: false
    check-type-param: true
    # Ignore "ok" variables that hold the bool return value of a type assertion.
    # Default: false
    ignore-type-assert-ok: true
    # Ignore "ok" variables that hold the bool return value of a map index.
    # Default: false
    ignore-map-index-ok: true
    # Ignore "ok" variables that hold the bool return value of a channel receive.
    # Default: false
    ignore-chan-recv-ok: true
    # Optional list of variable names that should be ignored completely.
    # Default: []
    ignore-names:
      - err
    # Optional list of variable declarations that should be ignored completely.
    # Entries must be in one of the following forms (see below for examples):
    # - for variables, parameters, named return values, method receivers, or type parameters:
    #   <name> <type>  (<type> can also be a pointer/slice/map/chan/...)
    # - for constants: const <name>
    #
    # Default: []
    ignore-decls:
      - c echo.Context
      - t testing.T
      - f *foo.Bar
      - e error
      - i int
      - const C
      - T any
      - m map[string]int

  whitespace:
    # Enforces newlines (or comments) after every multi-line if statement.
    # Default: false
    multi-if: true
    # Enforces newlines (or comments) after every multi-line function signature.
    # Default: false
    multi-func: true

  wrapcheck:
    # An array of strings that specify substrings of signatures to ignore.
    # If this set, it will override the default set of ignored signatures.
    # See https://github.com/tomarrell/wrapcheck#configuration for more information.
    # Default: [".Errorf(", "errors.New(", "errors.Unwrap(", "errors.Join(", ".Wrap(", ".Wrapf(", ".WithMessage(", ".WithMessagef(", ".WithStack("]
    ignoreSigs:
      - .Errorf(
      - errors.New(
      - errors.Unwrap(
      - errors.Join(
      - .Wrap(
      - .Wrapf(
      - .WithMessage(
      - .WithMessagef(
      - .WithStack(
    # An array of strings that specify regular expressions of signatures to ignore.
    # Default: []
    ignoreSigRegexps:
      - \.New.*Error\(
    # An array of strings that specify globs of packages to ignore.
    # Default: []
    ignorePackageGlobs:
      - encoding/*
      - github.com/pkg/*
    # An array of strings that specify regular expressions of interfaces to ignore.
    # Default: []
    ignoreInterfaceRegexps:
      - ^(?i)c(?-i)ach(ing|e)

  wsl:
    # Do strict checking when assigning from append (x = append(x, y)).
    # If this is set to true - the append call must append either a variable
    # assigned, called or used on the line above.
    # https://github.com/bombsimon/wsl/blob/master/doc/configuration.md#strict-append
    # Default: true
    strict-append: false

    # Allows assignments to be cuddled with variables used in calls on
    # line above and calls to be cuddled with assignments of variables
    # used in call on line above.
    # https://github.com/bombsimon/wsl/blob/master/doc/configuration.md#allow-assign-and-call
    # Default: true
    allow-assign-and-call: false

    # Allows assignments to be cuddled with anything.
    # https://github.com/bombsimon/wsl/blob/master/doc/configuration.md#allow-assign-and-anything
    # Default: false
    allow-assign-and-anything: true

    # Allows cuddling to assignments even if they span over multiple lines.
    # https://github.com/bombsimon/wsl/blob/master/doc/configuration.md#allow-multiline-assign
    # Default: true
    allow-multiline-assign: false

    # If the number of lines in a case block is equal to or lager than this number,
    # the case *must* end white a newline.
    # https://github.com/bombsimon/wsl/blob/master/doc/configuration.md#force-case-trailing-whitespace
    # Default: 0
    force-case-trailing-whitespace: 1

    # Allow blocks to end with comments.
    # https://github.com/bombsimon/wsl/blob/master/doc/configuration.md#allow-trailing-comment
    # Default: false
    allow-trailing-comment: true

    # Allow multiple comments in the beginning of a block separated with newline.
    # https://github.com/bombsimon/wsl/blob/master/doc/configuration.md#allow-separated-leading-comment
    # Default: false
    allow-separated-leading-comment: true

    # Allow multiple var/declaration statements to be cuddled.
    # https://github.com/bombsimon/wsl/blob/master/doc/configuration.md#allow-cuddle-declarations
    # Default: false
    allow-cuddle-declarations: true

    # A list of call idents that everything can be cuddled with.
    # Defaults: [ "Lock", "RLock" ]
    allow-cuddle-with-calls: [ "Foo", "Bar" ]

    # AllowCuddleWithRHS is a list of right hand side variables that is allowed
    # to be cuddled with anything.
    # Defaults: [ "Unlock", "RUnlock" ]
    allow-cuddle-with-rhs: [ "Foo", "Bar" ]

    # Causes an error when an If statement that checks an error variable doesn't
    # cuddle with the assignment of that variable.
    # https://github.com/bombsimon/wsl/blob/master/doc/configuration.md#force-err-cuddling
    # Default: false
    force-err-cuddling: true

    # When force-err-cuddling is enabled this is a list of names
    # used for error variables to check for in the conditional.
    # Default: [ "err" ]
    error-variable-names: [ "foo" ]

    # Causes an error if a short declaration (:=) cuddles with anything other than
    # another short declaration.
    # This logic overrides force-err-cuddling among others.
    # https://github.com/bombsimon/wsl/blob/master/doc/configuration.md#force-short-decl-cuddling
    # Default: false
    force-short-decl-cuddling: true

  # The custom section can be used to define linter plugins to be loaded at runtime.
  # See README documentation for more info.
  custom:
    # Each custom linter should have a unique name.
    example:
      # The plugin type.
      # It can be `goplugin` or `module`.
      # Default: goplugin
      type: module
      # The path to the plugin *.so. Can be absolute or local.
      # Required for each custom linter.
      path: /path/to/example.so
      # The description of the linter.
      # Optional.
      description: This is an example usage of a plugin linter.
      # Intended to point to the repo location of the linter.
      # Optional.
      original-url: github.com/golangci/example-linter
      # Plugins settings/configuration.
      # Only work with plugin based on `linterdb.PluginConstructor`.
      # Optional.
      settings:
        foo: bar


issues:
  # List of regexps of issue texts to exclude.
  #
  # But independently of this option we use default exclude patterns,
  # it can be disabled by `exclude-use-default: false`.
  # To list all excluded by default patterns execute `golangci-lint run --help`
  #
  # Default: https://golangci-lint.run/usage/false-positives/#default-exclusions
  exclude:
    - abcdef

  # Excluding configuration per-path, per-linter, per-text and per-source
  exclude-rules:
    # Exclude some linters from running on tests files.
    - path: _test\.go
      linters:
        - gocyclo
        - errcheck
        - dupl
        - gosec

    # Run some linter only for test files by excluding its issues for everything else.
    - path-except: _test\.go
      linters:
        - forbidigo

    # Exclude known linters from partially hard-vendored code,
    # which is impossible to exclude via `nolint` comments.
    # `/` will be replaced by current OS file path separator to properly work on Windows.
    - path: internal/hmac/
      text: "weak cryptographic primitive"
      linters:
        - gosec

    # Exclude some `staticcheck` messages.
    - linters:
        - staticcheck
      text: "SA9003:"

    # Exclude `lll` issues for long lines with `go:generate`.
    - linters:
        - lll
      source: "^//go:generate "

  # Independently of option `exclude` we use default exclude patterns,
  # it can be disabled by this option.
  # To list all excluded by default patterns execute `golangci-lint run --help`.
  # Default: true
  exclude-use-default: false

  # If set to true, `exclude` and `exclude-rules` regular expressions become case-sensitive.
  # Default: false
  exclude-case-sensitive: false

  # Which dirs to exclude: issues from them won't be reported.
  # Can use regexp here: `generated.*`, regexp is applied on full path,
  # including the path prefix if one is set.
  # Default dirs are skipped independently of this option's value (see exclude-dirs-use-default).
  # "/" will be replaced by current OS file path separator to properly work on Windows.
  # Default: []
  exclude-dirs:
    - src/external_libs
    - autogenerated_by_my_lib

  # Enables exclude of directories:
  # - vendor$, third_party$, testdata$, examples$, Godeps$, builtin$
  # Default: true
  exclude-dirs-use-default: false

  # Which files to exclude: they will be analyzed, but issues from them won't be reported.
  # There is no need to include all autogenerated files,
  # we confidently recognize autogenerated files.
  # If it's not, please let us know.
  # "/" will be replaced by current OS file path separator to properly work on Windows.
  # Default: []
  exclude-files:
    - ".*\\.my\\.go$"
    - lib/bad.go

  # Mode of the generated files analysis.
  #
  # - `strict`: sources are excluded by following strictly the Go generated file convention.
  #    Source files that have lines matching only the following regular expression will be excluded: `^// Code generated .* DO NOT EDIT\.$`
  #    This line must appear before the first non-comment, non-blank text in the file.
  #    https://go.dev/s/generatedcode
  # - `lax`: sources are excluded if they contain lines `autogenerated file`, `code generated`, `do not edit`, etc.
  # - `disable`: disable the generated files exclusion.
  #
  # Default: lax
  exclude-generated: strict

  # The list of ids of default excludes to include or disable.
  # https://golangci-lint.run/usage/false-positives/#default-exclusions
  # Default: []
  include:
    - EXC0001
    - EXC0002
    - EXC0003
    - EXC0004
    - EXC0005
    - EXC0006
    - EXC0007
    - EXC0008
    - EXC0009
    - EXC0010
    - EXC0011
    - EXC0012
    - EXC0013
    - EXC0014
    - EXC0015

  # Maximum issues count per one linter.
  # Set to 0 to disable.
  # Default: 50
  max-issues-per-linter: 0

  # Maximum count of issues with the same text.
  # Set to 0 to disable.
  # Default: 3
  max-same-issues: 0

  # Show only new issues: if there are unstaged changes or untracked files,
  # only those changes are analyzed, else only changes in HEAD~ are analyzed.
  # It's a super-useful option for integration of golangci-lint into existing large codebase.
  # It's not practical to fix all existing issues at the moment of integration:
  # much better don't allow issues in new code.
  #
  # Default: false
  new: true

  # Show only new issues created after git revision `REV`.
  # Default: ""
  new-from-rev: HEAD

  # Show only new issues created in git patch with set file path.
  # Default: ""
  new-from-patch: path/to/patch/file

  # Show issues in any part of update files (requires new-from-rev or new-from-patch).
  # Default: false
  whole-files: true

  # Fix found issues (if it's supported by the linter).
  # Default: false
  fix: true


# output configuration options
output:
  # The formats used to render issues.
  # Formats:
  # - `colored-line-number`
  # - `line-number`
  # - `json`
  # - `colored-tab`
  # - `tab`
  # - `html`
  # - `checkstyle`
  # - `code-climate`
  # - `junit-xml`
  # - `junit-xml-extended`
  # - `github-actions`
  # - `teamcity`
  # - `sarif`
  # Output path can be either `stdout`, `stderr` or path to the file to write to.
  #
  # For the CLI flag (`--out-format`), multiple formats can be specified by separating them by comma.
  # The output can be specified for each of them by separating format name and path by colon symbol.
  # Example: "--out-format=checkstyle:report.xml,json:stdout,colored-line-number"
  # The CLI flag (`--out-format`) override the configuration file.
  #
  # Default:
  #   formats:
  #     - format: colored-line-number
  #       path: stdout
  formats:
    - format: json
      path: stderr
    - format: checkstyle
      path: report.xml
    - format: colored-line-number

  # Print lines of code with issue.
  # Default: true
  print-issued-lines: false

  # Print linter name in the end of issue text.
  # Default: true
  print-linter-name: false

  # Make issues output unique by line.
  # Default: true
  uniq-by-line: false

  # Add a prefix to the output file references.
  # Default: ""
  path-prefix: ""

  # Sort results by the order defined in `sort-order`.
  # Default: false
  sort-results: true

  # Order to use when sorting results.
  # Require `sort-results` to `true`.
  # Possible values: `file`, `linter`, and `severity`.
  #
  # If the severity values are inside the following list, they are ordered in this order:
  #   1. error
  #   2. warning
  #   3. high
  #   4. medium
  #   5. low
  # Either they are sorted alphabetically.
  #
  # Default: ["file"]
  sort-order:
    - linter
    - severity
    - file # filepath, line, and column.

  # Show statistics per linter.
  # Default: false
  show-stats: true


# Options for analysis running.
run:
  # Timeout for analysis, e.g. 30s, 5m.
  # Default: 1m
  timeout: 5m

  # Exit code when at least one issue was found.
  # Default: 1
  issues-exit-code: 2

  # Include test files or not.
  # Default: true
  tests: false

  # List of build tags, all linters use it.
  # Default: []
  build-tags:
    - mytag

  # If set, we pass it to "go list -mod={option}". From "go help modules":
  # If invoked with -mod=readonly, the go command is disallowed from the implicit
  # automatic updating of go.mod described above. Instead, it fails when any changes
  # to go.mod are needed. This setting is most useful to check that go.mod does
  # not need updates, such as in a continuous integration and testing system.
  # If invoked with -mod=vendor, the go command assumes that the vendor
  # directory holds the correct copies of dependencies and ignores
  # the dependency descriptions in go.mod.
  #
  # Allowed values: readonly|vendor|mod
  # Default: ""
  modules-download-mode: readonly

  # Allow multiple parallel golangci-lint instances running.
  # If false, golangci-lint acquires file lock on start.
  # Default: false
  allow-parallel-runners: true

  # Allow multiple golangci-lint instances running, but serialize them around a lock.
  # If false, golangci-lint exits with an error if it fails to acquire file lock on start.
  # Default: false
  allow-serial-runners: true

  # Define the Go version limit.
  # Mainly related to generics support since go1.18.
  # Default: use Go version from the go.mod file, fallback on the env var `GOVERSION`, fallback on 1.17
  go: '1.19'

  # Number of operating system threads (`GOMAXPROCS`) that can execute golangci-lint simultaneously.
  # If it is explicitly set to 0 (i.e. not the default) then golangci-lint will automatically set the value to match Linux container CPU quota.
  # Default: the number of logical CPUs in the machine
  concurrency: 4


severity:
  # Set the default severity for issues.
  #
  # If severity rules are defined and the issues do not match or no severity is provided to the rule
  # this will be the default severity applied.
  # Severities should match the supported severity names of the selected out format.
  # - Code climate: https://docs.codeclimate.com/docs/issues#issue-severity
  # - Checkstyle: https://checkstyle.sourceforge.io/property_types.html#SeverityLevel
  # - GitHub: https://help.github.com/en/actions/reference/workflow-commands-for-github-actions#setting-an-error-message
  # - TeamCity: https://www.jetbrains.com/help/teamcity/service-messages.html#Inspection+Instance
  #
  # `@linter` can be used as severity value to keep the severity from linters (e.g. revive, gosec, ...)
  #
  # Default: ""
  default-severity: error

  # If set to true `severity-rules` regular expressions become case-sensitive.
  # Default: false
  case-sensitive: true

  # When a list of severity rules are provided, severity information will be added to lint issues.
  # Severity rules have the same filtering capability as exclude rules
  # except you are allowed to specify one matcher per severity rule.
  #
  # `@linter` can be used as severity value to keep the severity from linters (e.g. revive, gosec, ...)
  #
  # Only affects out formats that support setting severity information.
  #
  # Default: []
  rules:
    - linters:
        - dupl
      severity: info