Migrating back and forth between ConBee II (ConBee 2) and ConBee III (ConBee 3) using zigpy backup and restore?

[Hedda]

Is it possible to migrate back and forth between ConBee II (ConBee 2) and ConBee III (ConBee 3) using zigpy for backup and restore?

This question has been raised by Zigbee2MQTT users in Home Assistant’s community forum, see:

https://community.home-assistant.io/t/conbee-iii-conbee-3-from-dresden-elektronik-based-on-silicon-labs-efr32mg21-20dbm-radio-soc-mcu/649835

and

https://community.home-assistant.io/t/z2mqtt-transfer-from-conbee-2-to-3/662002

This question has also been posted in Zigbee2MQTT (Z2M) community however I think that it is a relevant question for all zigpy users:

Koenkk/zigbee2mqtt#19785

For reference, also see these indirectly related discussions with information on migrating from ConBee II (ConBee 2) to an ezsp adapter:

#24

Note that before migration you will always need to upgrade the firmware on your old ConBee/RaspBee adapter before doing a backup! (That is however not needed if backing up an old Silicon Labs or Texas Instruments based Zigbee Coordinator).

https://flemmingss.com/how-to-update-conbee-conbee-ii-firmware-in-windows-10/

https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Update-deCONZ-manually

PS: I do not own a ConBee II (ConBee 2) and ConBee III (ConBee 3) myself so just asking as a discussion about using zigpy-cli for migrations as Zigbee2MQTT users are currently using it as a stand-alone command-line tool for migration between deconz adapter (ConBee/RaspBee) and ezsp adapter because backups for those are not yet supported in the zigbee-herdsman library that Z2M depends on. See references:

Koenkk/zigbee-herdsman#665

Koenkk/zigbee2mqtt#16478

[koegmaster]

I use Zigbee2MQTT in Home Assistant with a Conbee 2 stick and looked for a way to migrate to my new Conbee 3 stick.
Thanks to this question here I tried the migration with zigpy and it worked flawlessly!
I did this through the backup (Conbee 2) and restore (Conbee 3) via zigpy cli on a separate Linux machine.
After plugging the Conbee 3 into the machine running Home Assistant, I just changed the device port from /dev/ttyACM0 to /dev/ttyUSB0 and the baudrate to 115200 in the Zigbee2MQTT Addon and all devices were still paired and useable like before.

@Hedda: Thanks for the hint!

[Hedda]

FYI, should now be easy to migrate (backup and restore) adapter via TubeZB’s zigpy-cli tools add-on if using Z2M with Home Assistant:

https://github.com/tube0013/tubeszb_addons/blob/main/tzb-zigpy-cli-tools/DOCS.md

https://community.home-assistant.io/t/new-add-on-for-running-zigpy-cli-commands-like-energy-scans/669727/

Note! If plan on migrating to a new adapter then best practice is to upgrade firmware on new adapter before migrating.

You of course also need to change both the serial port as well as the baud rate speed in Zigbee2MQTT configuration file.

I believe ConBee II uses 57600 baudrate + hardware flow control and the new ConBee III uses 115200 baudrate and no flow control.

Example from:

serial:
  port: /dev/ttyACM0
  adapter: deconz
  baudrate: 57600
  rtscts: true

advanced:
  # Optional: Set the adapter delay, only used for Conbee/Raspbee adapters (default 0).
  # In case you are having issues try `200`.
  # For more information see https://github.com/Koenkk/zigbee2mqtt/issues/4884
  adapter_delay: 0

to

serial:
  port: /dev/ttyUSB0
  adapter: deconz
  baudrate: 115200
  rtscts: false

advanced:
  # Optional: Set the adapter delay, only used for Conbee/Raspbee adapters (default 0).
  # In case you are having issues try `200`.
  # For more information see https://github.com/Koenkk/zigbee2mqtt/issues/4884
  adapter_delay: 0

PS: Off-topic; Tip is to use respective CC2652 Flasher or Silabs Flasher from TubesZB add-ons or ZigStar add-ons for upgrading adapter firmware if migrating to a Texas Instruments or Silicon Labs adapter (as none of those have been tested with ConBee based adapters).

https://github.com/tube0013/tubeszb_addons

https://github.com/mercenaruss/zigstar_addons

[DAVIZINH0]

Hello @Hedda
Can you tell us more info about the migration steps.
You make a backup for the tubeszb addon. and restore in the conbee3. You make any change in this file? or simply restore in the conbee3?

I tryed yesterday but not works because i think make some mistakes. I use a backup of conbee3 and change the parameters like key, tc_address, iee, panid, and others but keeps information about coordinator that type, model, name, version. maybe this was my error.

thanks a lot!!!

[Hedda]

If using Zigbee2MQTT then note can find more step-by-step under discussions in Koenkk's zigbee2mqtt GitHub repository, see:

Koenkk/zigbee2mqtt#19785

and

Koenkk/zigbee2mqtt#16478

But here is a short summery:

The only prerequisite is that you have first upgrade to the latest available firmware on the ConBee II / RaspBee II before can backup, (so begin to check the firmware version on ConBee II / RaspBee II is version 26720700 or newer as that makes it possible to backup the NWK security counter). Also note that you can not migrate from the original ConBee as it does not support the same firmware where full backup was possible (as not possible to backup and restore so that NWK security counter is transferred correctly).

• https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Update-deCONZ-manually
• https://flemmingss.com/how-to-update-conbee-conbee-ii-firmware-in-windows-10/
• https://deconz.dresden-elektronik.de/deconz-firmware/

It is not recommend to change anything in backup file before restoring, but regardless, you need to be aware of limitations and caveats;

If you do not want to manually re-pair all your devices then you can not change anything, but then you need to understand that you will not be able to reuse your old ConBee II as a Zigbee Coordinator in another Zigbee network that is in close proximity, as you can not have two Zigbee Coordinators with the same IEEE or PAN ID as they likley conflict with each other, (you should however be able to reuse a ConBee II as an OpenThread dongle -> https://github.com/dresden-elektronik/openthread-r21 or alternativly give it away to someone who will use it a long way away so the signals will not reach).

It is only if you do not mind re-pairing all your devices that you should (at least in theory) be able to change ieee, network key, Zigbee channel, or panid, but understand that if you do change anything then your existing devices will not be able to simply re-join the network so you will need to manually re-pair them all. Also note that if you do want to change the ieee then it is not enough to change it in the backup file, as you will also first need to write that new IEEE address to the firmware of the Zigbee Coordinator (which I have no clue if you can even do on a ConBee/RaspBee yourself, as personally I only done so on a Texas Isntruments CC2652 based adapter using cc2538-bsl.py).

After you restore from backup to a new Zigbee Coordinator radio adapter then you need to configure the correct configuration settings for baud rate speed, flow control, and device path that match what ever the new firmware and hardware is using (and can will be different for each so you will need to figure it out).

[DAVIZINH0]

Hello.
Thanks a lot for you advice.
My problem is that im modifing the file, big error.
I make a backup, and restore this backup directly in the conbee3.
After this, I modified the zigbee2mqtt config file with the new baudrate, and new port. and not work. :-(

but my problem is that i used the port:
/dev/ttyUSB0

and this not works in my case.
I changed it and use the complet "port route":
port: /dev/serial/by-id/usb-dresden_elektronik_ConBee_III.......................

and this works!!!!

Thanks a lot for your advices!

[familyafriends]

Hello everyone,
I tried following the instructions and I hit a wall and I am not sure how to proceed. Maybe someone here can help me out.

The backup seems to work. I get one or two warnings about unknown devices but that's it.
I followed the post above with the suggested settings.
The problem starts when I try to restore my file to the conbee 3.

I change my settings, including the baudarate, and start the zigpy-cli addon.
There seem to be a lot of errors coming up, as I can only copy-paste parts of it since the rest is not visible anymore:

Does anyone know what the problem could be?
I rebooted my computer when changing the USB stick to make sure it is recognized properly.

return await zigpy.zdo.broadcast(
           ^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/device.py", line 623, in broadcast
    return await app.broadcast(
           ^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/application.py", line 921, in broadcast
    await self.send_packet(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
    raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-02-12 18:30:23.792 d0f5a498-tzb-zigpy-cli-tools asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0xDD6E' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/local/lib/python3.11/site-packages/zigpy/application.py:942> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
    await self._api.aps_data_request(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 871, in aps_data_request
    rsp = await self.send_command(
          ^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
    return await self._command(cmd, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 586, in _command
    return await fut
           ^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/zigpy/application.py", line 945, in _discover_unknown_device
    return await zigpy.zdo.broadcast(
           ^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/device.py", line 623, in broadcast
    return await app.broadcast(
           ^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/application.py", line 921, in broadcast
    await self.send_packet(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
    raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-02-12 18:30:23.808 d0f5a498-tzb-zigpy-cli-tools asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0xDD6E' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/local/lib/python3.11/site-packages/zigpy/application.py:942> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
    await self._api.aps_data_request(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 871, in aps_data_request
    rsp = await self.send_command(
          ^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
    return await self._command(cmd, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 586, in _command
    return await fut
           ^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/zigpy/application.py", line 945, in _discover_unknown_device
    return await zigpy.zdo.broadcast(
           ^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/device.py", line 623, in broadcast
    return await app.broadcast(
           ^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/application.py", line 921, in broadcast
    await self.send_packet(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
    raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-02-12 18:30:23.825 d0f5a498-tzb-zigpy-cli-tools asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0xDD6E' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/local/lib/python3.11/site-packages/zigpy/application.py:942> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
    await self._api.aps_data_request(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 871, in aps_data_request
    rsp = await self.send_command(
          ^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
    return await self._command(cmd, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 586, in _command
    return await fut
           ^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/zigpy/application.py", line 945, in _discover_unknown_device
    return await zigpy.zdo.broadcast(
           ^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/device.py", line 623, in broadcast
    return await app.broadcast(
           ^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/application.py", line 921, in broadcast
    await self.send_packet(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
    raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-02-12 18:30:23.808 d0f5a498-tzb-zigpy-cli-tools asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0xDD6E' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/local/lib/python3.11/site-packages/zigpy/application.py:942> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
    await self._api.aps_data_request(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 871, in aps_data_request
    rsp = await self.send_command(
          ^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
    return await self._command(cmd, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 586, in _command
    return await fut
           ^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/zigpy/application.py", line 945, in _discover_unknown_device
    return await zigpy.zdo.broadcast(
           ^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/device.py", line 623, in broadcast
    return await app.broadcast(
           ^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/application.py", line 921, in broadcast
    await self.send_packet(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
    raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-02-12 18:30:23.825 d0f5a498-tzb-zigpy-cli-tools asyncio ERROR Task exception was never retrieved
future: <Task finished name='discover_unknown_device_from_packet-nwk=0xDD6E' coro=<ControllerApplication._discover_unknown_device() done, defined at /usr/local/lib/python3.11/site-packages/zigpy/application.py:942> exception=DeliveryError("Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')")>
Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 508, in send_packet
    await self._api.aps_data_request(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 871, in aps_data_request
    rsp = await self.send_command(
          ^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
    return await self._command(cmd, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 586, in _command
    return await fut
           ^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/zigpy/application.py", line 945, in _discover_unknown_device
    return await zigpy.zdo.broadcast(
           ^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/device.py", line 623, in broadcast
    return await app.broadcast(
           ^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy/application.py", line 921, in broadcast
    await self.send_packet(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 522, in send_packet
    raise zigpy.exceptions.DeliveryError(
zigpy.exceptions.DeliveryError: Failed to enqueue packet: CommandError('<CommandId.aps_data_request: 18>, status: <Status.NO_NETWORK: 6>')
2024-02-12 18:30:26.881 d0f5a498-tzb-zigpy-cli-tools zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0x2BB3)
2024-02-12 18:30:26.913 d0f5a498-tzb-zigpy-cli-tools zigpy.application WARNING Unknown device AddrModeAddress(addr_mode=<AddrMode.NWK: 2>, address=0xDB98)
[18:30:27] INFO: Action Complete
[18:30:27] INFO: zigpy-cli-up script exited with code 0
s6-rc: info: service zigpy-cli successfully started
s6-rc: info: service legacy-services: starting
s6-rc: info: service legacy-services successfully started
s6-rc: info: service legacy-services: stopping
s6-rc: info: service legacy-services successfully stopped
s6-rc: info: service zigpy-cli: stopping
s6-rc: info: service zigpy-cli successfully stopped
s6-rc: info: service banner: stopping
s6-rc: info: service banner successfully stopped
s6-rc: info: service legacy-cont-init: stopping
s6-rc: info: service legacy-cont-init successfully stopped
s6-rc: info: service fix-attrs: stopping
s6-rc: info: service fix-attrs successfully stopped
s6-rc: info: service s6rc-oneshot-runner: stopping
s6-rc: info: service s6rc-oneshot-runner successfully stopped

[Hedda]

@familyafriends see that you started a new issue here for your specific problem -> #46

I posted as a reply in another issue, but wanted to try this here one more time.

FYI, note that someone else posted about some various ConBee II to ConBee II migration issues related to Zigbee2MQTT, including problems caused by him modifying the backup file before restoring it (which is a bad idea unless you know exactly what you are doing and the consequences of doing so)

#41 (reply in thread)

"My problem is that im modifing the file, big error. I make a backup, and restore this backup directly in the conbee3."

He also wrote that he got device path issue after the migration but that he got the new config working and changing baud rate and after he changed to using the registered /dev/serial/by-id/ as device path instead of /dev/ttyUSBX (as the general way to find a device specific USB serial port under Linuxis to run ls /dev/serial/by-id/* from an ssh terminal on the host machine which should produce output similar to: /dev/serial/by-id/usb-dresden_elektronik_ConBee_III.......................).

Also note that if Zigbee2MQTT is used in a Docker container then you might need to install and configure Docker-Compose, see example here (that probably needs to be adapted) -> https://www.home-assistant.io/integrations/zha#docker-compose

You seem to be running it with tube0013's addon. Maybe there's a way to enable debug logging there. If not, you can install it on any platform and run the commands directly: https://github.com/zigpy/zigpy-cli?tab=readme-ov-file#installation

PS: FYI, this zigpy command line tool was acutally not made for use with Zigbee2MQTT but for the ZHA integration in Home Assistant (which is why zigpy was originally made), however, zigpy-cli can be used as an external stand-alone third-party tool for Zigbee network backup and restore. Another related FYI, be aware that there are also a couple of Zigbee2MQTT specific discussions here if you have any Zigbee2MQTT specific questions or problems related to this:

Koenkk/zigbee2mqtt#16478

Koenkk/zigbee2mqtt#19785

[familyafriends]

Thanks for the reply. The post here was made a lot earlier and when there was no reaction, I wasn't sure if it even works, if I use existing posts. That's why I created the separate post.
Unfortunately I did not modify the file and I always use the device specific paths, copied directly from the homeassistant hardware section.

I am not too familiar with the "docker" stuff. I use a mini computer that runs HA OS and that's it. When using the zigpy-cli tool, I ran it in the ssh & web Terminal add on of homeassistant using the non secure mode.

I will follow the links that you posted and see if anyone else faces the same issues :)

[puddly]

I think that your problem isn't actually a problem so you can safely ignore the delivery error tracebacks. Nothing about the errors is consequential and they can show up if you have a very busy network.

[familyafriends]

I do have quite a few devices in there. Thanks for your feedback. If everything looks good from that "restore end" I will try to figure out why z2mqtt is not working then. Depending on the situation, z2mqtt can be very bitchy.
Thanks for taking the time to look over it!!

Do you have a link somewhere so I can get you a coffee?

[talondnb]

Hoping someone can help me out here, I've researched the procedure and it looks straight forward. I'm running Hassio on a pi4 with z2m addon and also installed zigpy-cli tools by TubesZB.

I've just bought a conbee3 to replace my conbee2 and have performed an update on the conbee2 to 0x26780700 and update on the conbee3 to 0x26450900, both latest versions from here.

Afterward with both sticks plugged, I ran a backup of the json config from conbee2 as well as conbee3. I then ran a restore of the same filename from conbee2 to the conbee3 and get the following error:

-----------------------------------------------------------
 Add-on: TubesZB Zigpy-CLI Tools
 TubesZB Zigpy-CLI Toolsadd-on
-----------------------------------------------------------
 Add-on version: 0.3.0.0
 You are running the latest version of this add-on.
 System: Home Assistant OS 13.1  (armv7 / raspberrypi4)
 Home Assistant Core: 2024.9.3
 Home Assistant Supervisor: 2024.09.1
-----------------------------------------------------------
 Please, share the above information when looking for help
 or support in, e.g., GitHub, forums or the Discord chat.
-----------------------------------------------------------
s6-rc: info: service banner successfully started
s6-rc: info: service zigpy-cli: starting
[19:55:33] INFO: Directoty Exists
[19:55:34] INFO: Running zigpy - restore on /dev/ttyUSB0 to /config/tzb-zigpy-cli-tools/conbee_ii_02102024_backup.json
Traceback (most recent call last):
  File "/usr/local/bin/zigpy", line 8, in <module>
    sys.exit(cli())
             ^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 1157, in __call__
    return self.main(*args, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 1078, in main
    rv = self.invoke(ctx)
         ^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 1688, in invoke
    return _process_result(sub_ctx.command.invoke(sub_ctx))
                           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 1688, in invoke
    return _process_result(sub_ctx.command.invoke(sub_ctx))
                           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 1434, in invoke
    return ctx.invoke(self.callback, **ctx.params)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 783, in invoke
    return __callback(*args, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/decorators.py", line 45, in new_func
    return f(get_current_context().obj, *args, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_cli/cli.py", line 20, in inner
    return loop.run_until_complete(cmd(*args, **kwargs))
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/asyncio/base_events.py", line 654, in run_until_complete
    return future.result()
           ^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_cli/radio.py", line 141, in restore
    await app.backups.restore_backup(backup, counter_increment=frame_counter_increment)
  File "/usr/local/lib/python3.11/site-packages/zigpy/backups.py", line 171, in restore_backup
    await self.app.write_network_info(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 264, in write_network_info
    await self._api.write_parameter(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 849, in write_parameter
    await self.send_command(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
    return await self._command(cmd, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
    return await fut
           ^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.write_parameter: 11>, status: <Status.UNSUPPORTED: 4>
[19:55:36] INFO: zigpy-cli-up script exited with code 1
s6-rc: warning: unable to start service zigpy-cli: command exited 1
s6-rc: info: service banner: stopping
/run/s6/basedir/scripts/rc.init: warning: s6-rc failed to properly bring all the services up! Check your logs (in /run/uncaught-logs/current if you have in-container logging) for more information.
/run/s6/basedir/scripts/rc.init: fatal: stopping the container.
s6-rc: info: service banner successfully stopped
s6-rc: info: service legacy-cont-init: stopping
s6-rc: info: service legacy-cont-init successfully stopped
s6-rc: info: service fix-attrs: stopping
s6-rc: info: service fix-attrs successfully stopped
s6-rc: info: service s6rc-oneshot-runner: stopping
s6-rc: info: service s6rc-oneshot-runner successfully stopped

If i run a compare between the two json files, is there a way to modify the config files to make this work on the conbee3 config that i backed up by moving some parameters over? I suspect I would only really need to align the network_key parameter?

Unfortunately I'm kinda stuck from here, any advice appreciated.

[tube0013]

@talondnb update the addon to 0.3.1 I've added an option to enable verbose logging:

[talondnb]

That’s awesome, thanks. I’ll get some output shortly to post here.

[talondnb]

-----------------------------------------------------------
 Add-on: TubesZB Zigpy-CLI Tools
 TubesZB Zigpy-CLI Toolsadd-on
-----------------------------------------------------------
 Add-on version: 0.3.1.0
 You are running the latest version of this add-on.
 System: Home Assistant OS 13.1  (armv7 / raspberrypi4)
 Home Assistant Core: 2024.9.3
 Home Assistant Supervisor: 2024.09.1
-----------------------------------------------------------
 Please, share the above information when looking for help
 or support in, e.g., GitHub, forums or the Discord chat.
-----------------------------------------------------------
s6-rc: info: service banner successfully started
s6-rc: info: service zigpy-cli: starting
[18:46:09] INFO: 
[18:46:09] INFO: Directoty Exists
[18:46:10] INFO: Running zigpy - restore on /dev/ttyUSB0 to /config/tzb-zigpy-cli-tools/conbee_ii_02102024_backup.json
2024-10-03 18:46:13.110 d0f5a498-tzb-zigpy-cli-tools asyncio DEBUG Using selector: EpollSelector
2024-10-03 18:46:13.137 d0f5a498-tzb-zigpy-cli-tools zigpy.ota DEBUG Registering new OTA provider: Ledvance(url='https://api.update.ledvance.com/v1/zigbee/firmwares', manufacturer_ids=(4489, 4364))
2024-10-03 18:46:13.138 d0f5a498-tzb-zigpy-cli-tools zigpy.ota DEBUG Registering new OTA provider: Sonoff(url=None, manufacturer_ids=(4742,))
2024-10-03 18:46:13.138 d0f5a498-tzb-zigpy-cli-tools zigpy.ota DEBUG Registering new OTA provider: Inovelli(url=None, manufacturer_ids=(4655,))
2024-10-03 18:46:13.139 d0f5a498-tzb-zigpy-cli-tools zigpy.ota DEBUG Registering new OTA provider: ThirdReality(url=None, manufacturer_ids=(4659, 4877, 5127))
2024-10-03 18:46:13.143 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Connecting to /dev/ttyUSB0
2024-10-03 18:46:13.143 d0f5a498-tzb-zigpy-cli-tools zigpy.serial DEBUG Opening a serial connection to '/dev/ttyUSB0' (baudrate=115200, xonxoff=False, rtscts=False)
2024-10-03 18:46:13.149 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Connection made
2024-10-03 18:46:13.150 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Connected to /dev/ttyUSB0
2024-10-03 18:46:13.150 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.read_parameter{'parameter_id': <NetworkParameter.protocol_version: 34>, 'parameter': b''} (seq=1)
2024-10-03 18:46:13.151 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0a01000800010022
2024-10-03 18:46:13.165 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0a01000a000300220c01
2024-10-03 18:46:13.165 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.read_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 10, 'payload_length': 3, 'parameter_id': <NetworkParameter.protocol_version: 34>, 'parameter': b'\x0c\x01'} (seq 1)
2024-10-03 18:46:13.166 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Read parameter protocol_version(None)=268
2024-10-03 18:46:13.167 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.version{'reserved': 0} (seq=2)
2024-10-03 18:46:13.167 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0d0200090000000000
2024-10-03 18:46:13.181 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0d0200090000094526
2024-10-03 18:46:13.182 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.version{'status': <Status.SUCCESS: 0>, 'frame_length': 9, 'version': FirmwareVersion<0x26450900>(reserved=0, platform=<FirmwarePlatform.Conbee_III: 9>, minor=69, major=38)} (seq 2)
2024-10-03 18:46:13.184 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.device_state{} (seq=3)
2024-10-03 18:46:13.184 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0703000800000000
2024-10-03 18:46:13.198 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0703000800220000
2024-10-03 18:46:13.199 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.device_state{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'device_state': DeviceState(network_state=<NetworkState2.CONNECTED: 2>, device_state=<DeviceStateFlags.APSDE_DATA_REQUEST_FREE_SLOTS_AVAILABLE: 8>), 'reserved1': 0, 'reserved2': 0} (seq 3)
2024-10-03 18:46:13.200 d0f5a498-tzb-zigpy-cli-tools zigpy.backups DEBUG Restoring backup NetworkBackup(version=1, backup_time=datetime.datetime(2024, 10, 2, 11, 43, 48, 341139, tzinfo=datetime.timezone.utc), network_info=NetworkInfo(extended_pan_id=dd:dd:dd:dd:dd:dd:dd:dd, pan_id=0x1A62, nwk_update_id=0, nwk_manager_id=0x0000, channel=11, channel_mask=<Channels.CHANNEL_11: 2048>, security_level=5, network_key=Key(key=01:03:05:07:09:0b:0d:0f:00:02:04:06:08:0a:0c:0d, tx_counter=12489680, rx_counter=0, seq=0, partner_ieee=ff:ff:ff:ff:ff:ff:ff:ff), tc_link_key=Key(key=5a:69:67:42:65:65:41:6c:6c:69:61:6e:63:65:30:39, tx_counter=0, rx_counter=0, seq=0, partner_ieee=00:21:2e:ff:ff:06:6e:e0), key_table=[], children=[], nwk_addresses={}, stack_specific={}, metadata={'deconz': {'version': '0x26780700'}}, source='zigpy-deconz@0.23.3'), node_info=NodeInfo(nwk=0x0000, ieee=00:21:2e:ff:ff:06:6e:e0, logical_type=<LogicalType.Coordinator: 0>, model='Raspbee II', manufacturer='dresden elektronik', version='0x26780700'))
2024-10-03 18:46:13.201 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.nwk_frame_counter: 39>, 'parameter': b'X\xa7\xbe\x00'} (seq=4)
2024-10-03 18:46:13.202 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b04000c0005002758a7be00
2024-10-03 18:46:13.213 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b04000800010027
2024-10-03 18:46:13.214 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.nwk_frame_counter: 39>} (seq 4)
2024-10-03 18:46:13.215 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.aps_designed_coordinator: 9>, 'parameter': b'\x01'} (seq=5)
2024-10-03 18:46:13.215 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b0500090002000901
2024-10-03 18:46:13.229 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b05000800010009
2024-10-03 18:46:13.230 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.aps_designed_coordinator: 9>} (seq 5)
2024-10-03 18:46:13.233 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.nwk_address: 7>, 'parameter': b'\x00\x00'} (seq=6)
2024-10-03 18:46:13.234 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b06000a000300070000
2024-10-03 18:46:13.246 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b06000800010007
2024-10-03 18:46:13.247 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.nwk_address: 7>} (seq 6)
2024-10-03 18:46:13.248 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.mac_address: 1>, 'parameter': b'\xe0n\x06\xff\xff.!\x00'} (seq=7)
2024-10-03 18:46:13.248 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b07001000090001e06e06ffff2e2100
2024-10-03 18:46:13.261 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b07000800010001
2024-10-03 18:46:13.262 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.mac_address: 1>} (seq 7)
2024-10-03 18:46:13.263 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.channel_mask: 10>, 'parameter': b'\x00\x08\x00\x00'} (seq=8)
2024-10-03 18:46:13.264 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b08000c0005000a00080000
2024-10-03 18:46:13.277 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b0800080001000a
2024-10-03 18:46:13.277 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.channel_mask: 10>} (seq 8)
2024-10-03 18:46:13.279 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.use_predefined_nwk_panid: 21>, 'parameter': b'\x01'} (seq=9)
2024-10-03 18:46:13.279 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b0900090002001501

..

2024-10-03 18:46:13.229 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b05000800010009
2024-10-03 18:46:13.230 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.aps_designed_coordinator: 9>} (seq 5)
2024-10-03 18:46:13.233 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.nwk_address: 7>, 'parameter': b'\x00\x00'} (seq=6)
2024-10-03 18:46:13.234 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b06000a000300070000
2024-10-03 18:46:13.246 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b06000800010007
2024-10-03 18:46:13.247 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.nwk_address: 7>} (seq 6)
2024-10-03 18:46:13.248 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.mac_address: 1>, 'parameter': b'\xe0n\x06\xff\xff.!\x00'} (seq=7)
2024-10-03 18:46:13.248 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b07001000090001e06e06ffff2e2100
2024-10-03 18:46:13.261 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b07000800010001
2024-10-03 18:46:13.262 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.mac_address: 1>} (seq 7)
2024-10-03 18:46:13.263 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.channel_mask: 10>, 'parameter': b'\x00\x08\x00\x00'} (seq=8)
2024-10-03 18:46:13.264 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b08000c0005000a00080000
2024-10-03 18:46:13.277 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b0800080001000a
2024-10-03 18:46:13.277 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.channel_mask: 10>} (seq 8)
2024-10-03 18:46:13.279 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.use_predefined_nwk_panid: 21>, 'parameter': b'\x01'} (seq=9)
2024-10-03 18:46:13.279 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b0900090002001501
2024-10-03 18:46:13.293 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b09000800010015
2024-10-03 18:46:13.293 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.use_predefined_nwk_panid: 21>} (seq 9)
2024-10-03 18:46:13.294 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.nwk_panid: 5>, 'parameter': b'b\x1a'} (seq=10)
2024-10-03 18:46:13.295 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b0a000a00030005621a
2024-10-03 18:46:13.309 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b0a000800010005
2024-10-03 18:46:13.310 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.nwk_panid: 5>} (seq 10)
2024-10-03 18:46:13.311 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.aps_extended_panid: 11>, 'parameter': b'\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd'} (seq=11)
2024-10-03 18:46:13.312 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b0b00100009000bdddddddddddddddd
2024-10-03 18:46:13.325 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b0b00080001000b
2024-10-03 18:46:13.326 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.aps_extended_panid: 11>} (seq 11)
2024-10-03 18:46:13.327 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.nwk_update_id: 36>, 'parameter': b'\x00'} (seq=12)
2024-10-03 18:46:13.327 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b0c00090002002400
2024-10-03 18:46:13.341 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b0c000800010024
2024-10-03 18:46:13.342 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.nwk_update_id: 36>} (seq 12)
2024-10-03 18:46:13.343 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.network_key: 24>, 'parameter': b'\x00\x01\x03\x05\x07\t\x0b\r\x0f\x00\x02\x04\x06\x08\n\x0c\r'} (seq=13)
2024-10-03 18:46:13.344 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b0d0019001200180001030507090b0d0f00020406080a0c0d
2024-10-03 18:46:13.357 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b0d000800010018
2024-10-03 18:46:13.358 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.network_key: 24>} (seq 13)
2024-10-03 18:46:13.359 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.trust_center_address: 14>, 'parameter': b'\xe0n\x06\xff\xff.!\x00'} (seq=14)
2024-10-03 18:46:13.360 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b0e00100009000ee06e06ffff2e2100
2024-10-03 18:46:13.373 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b0e00080001000e
2024-10-03 18:46:13.374 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.SUCCESS: 0>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.trust_center_address: 14>} (seq 14)
2024-10-03 18:46:13.375 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Sending CommandId.write_parameter{'parameter_id': <NetworkParameter.link_key: 25>, 'parameter': b'\xe0n\x06\xff\xff.!\x00ZigBeeAlliance09'} (seq=15)
2024-10-03 18:46:13.376 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Send: 0b0f002000190019e06e06ffff2e21005a6967426565416c6c69616e63653039
2024-10-03 18:46:13.389 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.uart DEBUG Frame received: 0x0b0f040800010019
2024-10-03 18:46:13.390 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Received command CommandId.write_parameter{'status': <Status.UNSUPPORTED: 4>, 'frame_length': 8, 'payload_length': 1, 'parameter_id': <NetworkParameter.link_key: 25>} (seq 15)
2024-10-03 18:46:13.394 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Serial '/dev/ttyUSB0' connection lost unexpectedly: None
Traceback (most recent call last):
  File "/usr/local/bin/zigpy", line 8, in <module>
    sys.exit(cli())
             ^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 1157, in __call__
    return self.main(*args, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 1078, in main
    rv = self.invoke(ctx)
         ^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 1688, in invoke
    return _process_result(sub_ctx.command.invoke(sub_ctx))
                           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 1688, in invoke
    return _process_result(sub_ctx.command.invoke(sub_ctx))
                           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 1434, in invoke
    return ctx.invoke(self.callback, **ctx.params)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/core.py", line 783, in invoke
    return __callback(*args, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/click/decorators.py", line 45, in new_func
    return f(get_current_context().obj, *args, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_cli/cli.py", line 20, in inner
    return loop.run_until_complete(cmd(*args, **kwargs))
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/asyncio/base_events.py", line 654, in run_until_complete
    return future.result()
           ^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_cli/radio.py", line 141, in restore
    await app.backups.restore_backup(backup, counter_increment=frame_counter_increment)
  File "/usr/local/lib/python3.11/site-packages/zigpy/backups.py", line 171, in restore_backup
    await self.app.write_network_info(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/zigbee/application.py", line 264, in write_network_info
    await self._api.write_parameter(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 849, in write_parameter
    await self.send_command(
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 508, in send_command
    return await self._command(cmd, **kwargs)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/zigpy_deconz/api.py", line 589, in _command
    return await fut
           ^^^^^^^^^
zigpy_deconz.exception.CommandError: <CommandId.write_parameter: 11>, status: <Status.UNSUPPORTED: 4>
[18:46:13] INFO: zigpy-cli-up script exited with code 1
s6-rc: warning: unable to start service zigpy-cli: command exited 1
s6-rc: info: service banner: stopping
/run/s6/basedir/scripts/rc.init: warning: s6-rc failed to properly bring all the services up! Check your logs (in /run/uncaught-logs/current if you have in-container logging) for more information.
/run/s6/basedir/scripts/rc.init: fatal: stopping the container.
s6-rc: info: service banner successfully stopped
s6-rc: info: service legacy-cont-init: stopping
s6-rc: info: service legacy-cont-init successfully stopped
s6-rc: info: service fix-attrs: stopping
s6-rc: info: service fix-attrs successfully stopped
s6-rc: info: service s6rc-oneshot-runner: stopping
s6-rc: info: service s6rc-oneshot-runner successfully stopped

Unfortunately I could not grab the full log as I had to capture it as it was happening due to not being able to scroll upward after full log appeared. @tube0013 is the verbose logging a limited number of lines? Is there somewhere else I can grab the full logs in CLI? I couldn't find anything so far.

[talondnb]

This line is interesting:

2024-10-03 18:46:13.394 d0f5a498-tzb-zigpy-cli-tools zigpy_deconz.api DEBUG Serial '/dev/ttyUSB0' connection lost unexpectedly: None

[talondnb]

OK this is interesting, I went ahead and continued with attempting to use the dongle anyway (I hadn't tried this earlier) and it appears to be working oddly. Will monitor for now!