Support for garmin vivofit #58
Description
Hello,
I'm really happy finding this repository, although I'm strugling to run it with garmin vivofit. I've been coding for a while and could contribute with a little show-around this codebase.
I'm also adding a log of a simple run and a try to sync.
$ sudo python ant-downloader.py
[sudo] password for shookees:
[MainThread] 2014-06-19 21:01:58,495 WARNING Failed to find Garmin nRF24AP2 (newer) USB Stick.
Traceback (most recent call last):
File "/home/shookees/Documents/src/python-ant-downloader/antd/cfg.py", line 92, in create_hardware
return hw.UsbHardware(id_vendor, id_product, bulk_endpoint)
File "/home/shookees/Documents/src/python-ant-downloader/antd/hw.py", line 61, in __init__
raise NoUsbHardwareFound(errno.ENOENT, "No available device matching vid(0x%04x) pid(0x%04x)." % (id_vendor, id_product))
NoUsbHardwareFound: [Errno 2] No available device matching vid(0x0fcf) pid(0x1008).
[MainThread] 2014-06-19 21:01:58,495 WARNING Looking for nRF24AP1 (older) Serial USB Stick.
[MainThread] 2014-06-19 21:01:59,502 INFO Searching for ANT devices.
[MainThread] 2014-06-19 21:02:04,236 DEBUG Got ANT-FS Beacon. device_number=0xd8a6 Beacon{'auth_type': 0, 'pairing_enabled': 0, 'data_available': 32, 'device_state': 0, 'period': 3, 'descriptor': 67373, 'upload_enabled': 16, 'data_page_id': 67, 'data': '', 'status_2': 0, 'status_1': 51}
[MainThread] 2014-06-19 21:02:04,236 INFO Device has data. Linking.
[MainThread] 2014-06-19 21:02:04,237 DEBUG Setting period to match device, hz=4
[MainThread] 2014-06-19 21:02:04,503 DEBUG Linking with device. freq=2420mhz
[MainThread] 2014-06-19 21:02:05,770 WARNING Retryable error. 9 try(s) remaining. Send message was not acknowledged by peer. CHANNEL_EVENT(channel_number=0, msg_id=1, msg_code=6)
[MainThread] 2014-06-19 21:02:06,255 INFO Pairing with device.
[MainThread] 2014-06-19 21:02:06,534 DEBUG Got client auth string. Auth{'auth_string': 'v\xc3\xadvofit\x00\x00\x00\x00\x00\x00\x00\x00', 'beacon': <antd.antfs.Beacon object at 0x7f3f3e9579d0>, 'op_id': None, 'response_type': 0, 'client_id': 3883194534, 'host_id': 9168, 'data_page_id': 68, 'command_id': 132}
[MainThread] 2014-06-19 21:02:06,534 DEBUG Device secret known.
[MainThread] 2014-06-19 21:02:06,762 DEBUG Device accepted key.
[MainThread] 2014-06-19 21:02:06,877 INFO Saving raw data to /home/shookees/.antd/0xe774d8a6/raw/20140619-210206.raw.
[MainThread] 2014-06-19 21:02:06,878 DEBUG A000: executing product request
[Thread-1] 2014-06-19 21:02:08,604 WARNING Failed to receive RF beacon at expected period. channel_number=0
[Thread-1] 2014-06-19 21:02:11,479 WARNING Failed to receive RF beacon at expected period. channel_number=0
[Thread-1] 2014-06-19 21:02:11,979 WARNING Failed to receive RF beacon at expected period. channel_number=0
[MainThread] 2014-06-19 21:02:12,388 WARNING Caught error while communicating with device, will retry.
Traceback (most recent call last):
File "/home/shookees/Documents/src/python-ant-downloader/antd/main.py", line 98, in downloader
dev = antd.Device(host)
File "/home/shookees/Documents/src/python-ant-downloader/antd/garmin.py", line 312, in __init__
self.init_device_api()
File "/home/shookees/Documents/src/python-ant-downloader/antd/garmin.py", line 343, in init_device_api
product_data = self.get_product_data()
File "/home/shookees/Documents/src/python-ant-downloader/antd/garmin.py", line 318, in get_product_data
return self.execute(A000())[0]
File "/home/shookees/Documents/src/python-ant-downloader/antd/garmin.py", line 415, in execute
pkt = self.stream.read()
File "/home/shookees/Documents/src/python-ant-downloader/antd/antfs.py", line 409, in read
direct_reply = GarminSendDirect.unpack(self.channel.read())
File "/home/shookees/Documents/src/python-ant-downloader/antd/ant.py", line 918, in read
return self._session._send(ReadData(self.channel_number, ReadData), timeout=timeout).data
File "/home/shookees/Documents/src/python-ant-downloader/antd/ant.py", line 680, in _send
raise cmd.error
AntTimeoutError: No reply to command. ReadData(channel_number=0)