Raspberry Pi is transitioning from a legacy camera software stack based on proprietary Broadcom GPU code to an open-source stack based on libcamera. This version of the driver is deprecated on the new Bullseye system or later. This driver just can be used on legacy buster version system or before version.
Arducam OBISP project is to address the problem of lacking ISP support for the RAW sensor, it has On Board ISP as the name implies which has dedicated hardware processor and not relay on the backend processor’s processing capability. With the OBISP camera, users can use better cameras than those natively supported cameras like OV5647, IMX219, IMX477 on Arduino, Raspberry pi, and Jetson Nano without struggling with the ISP things. The first two released OBISP cameras are 13MP AR1335 high-resolution camera and 2MP AR0230 HDR camera. And Sony starvis IMX290, IMX327 camera will come up very soon.
Current driver supports the following kerner version, for other kernel please send us request for adding support or source code to compile by yourself.
- 4.19.113-v7+
- 4.19.118+
- 4.19.118-v7+
- 4.19.118-v7I+
- 5.4.42-v7+
- 5.4.51+
- 5.4.51-v7+
- 5.4.51-v7l+
For Arducam mipi camera + Pivariety driver, referring to https://github.com/ArduCAM/Arducam-Pivariety-V4L2-Driver
https://www.arducam.com/docs/arducam-obisp-mipi-camera-module/
Tested in ubuntu 16.04, 18.04 and 20.04 Run the following command and follow the instructions
- bash build_driver.sh