PulseAudioConfigs_in_/etc/pulse/default.pa

PLEASE COPY FROM RAW VERSION OF THIS FILE, NOT DIRECTLY FROM MARKDOWN README!!!

Copy these configs to a file in /etc/pulse/default.pa

Remember to run "pulseaudio -k" afterwards!!!

#!/usr/bin/pulseaudio -nF

This file is part of PulseAudio.

PulseAudio is free software; you can redistribute it and/or modify it

under the terms of the GNU Lesser General Public License as published by

the Free Software Foundation; either version 2 of the License, or

(at your option) any later version.

PulseAudio is distributed in the hope that it will be useful, but

WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

General Public License for more details.

You should have received a copy of the GNU Lesser General Public License

along with PulseAudio; if not, see http://www.gnu.org/licenses/.

This startup script is used only if PulseAudio is started per-user

(i.e. not in system mode)

.fail

Automatically restore the volume of streams and devices

load-module module-device-restore load-module module-stream-restore load-module module-card-restore

Automatically augment property information from .desktop files

stored in /usr/share/application

load-module module-augment-properties

Should be after module--restore but before module--detect

load-module module-switch-on-port-available

Use hot-plugged devices like Bluetooth or USB automatically (LP: #1702794)

.ifexists module-switch-on-connect.so load-module module-switch-on-connect .endif

Load audio drivers statically

(it's probably better to not load these drivers manually, but instead

use module-udev-detect -- see below -- for doing this automatically)

#load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink

Automatically load driver modules depending on the hardware available

.ifexists module-udev-detect.so load-module module-udev-detect .else

Use the static hardware detection module (for systems that lack udev support)

load-module module-detect .endif

Automatically connect sink and source if JACK server is present

.ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif

Automatically load driver modules for Bluetooth hardware

.ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif

.ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif

Load several protocols

.ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix

Network access (may be configured with paprefs, so leave this commented

here if you plan to use paprefs)

#load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish

Load the RTP receiver module (also configured via paprefs, see above)

#load-module module-rtp-recv

Load the RTP sender module (also configured via paprefs, see above)

#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor

Load additional modules from GSettings. This can be configured with the paprefs tool.

Please keep in mind that the modules configured by paprefs might conflict with manually

loaded modules.

.ifexists module-gsettings.so .nofail load-module module-gsettings .fail .endif

Automatically restore the default sink/source when changed by the user

during runtime

NOTE: This should be loaded as early as possible so that subsequent modules

that look up the default sink/source get the right value

load-module module-default-device-restore

Make sure we always have a sink around, even if it is a null sink.

load-module module-always-sink

Honour intended role device property

load-module module-intended-roles

Automatically suspend sinks/sources that become idle for too long

load-module module-suspend-on-idle

If autoexit on idle is enabled we want to make sure we only quit

when no local session needs us anymore.

.ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif

Enable positioned event sounds

load-module module-position-event-sounds

Cork music/video streams when a phone stream is active

load-module module-role-cork

Block audio recording for snap confined packages unless they have

the "pulseaudio" or "audio-record" interfaces plugged.

.ifexists module-snap-policy.so load-module module-snap-policy .endif

Modules to allow autoloading of filters (such as echo cancellation)

on demand. module-filter-heuristics tries to determine what filters

make sense, and module-filter-apply does the heavy-lifting of

loading modules and rerouting streams.

load-module module-filter-heuristics load-module module-filter-apply

Make some devices default

#set-default-sink output #set-default-source input load-module module-echo-cancel source_name=noechosource sink_name=noechosink aec_args="analog_gain_control=0 digital_gain_control=0" #load-module module-echo-cancel source_name=noechosource sink_name=noechosink set-default-source noechosource set-default-sink noechosink