SDK updates & timeout fixes

lib/BlueSCSI_platform_RP2040/BlueSCSI_platform.cpp

@@ -22,7 +22,7 @@
 #endif
 
 #ifndef __MBED__
-# include <SerialUSB.h>
+#include <Adafruit_TinyUSB.h>
 # include <class/cdc/cdc_device.h>
 #else
 # include <platform/mbed_error.h>
@@ -34,7 +34,6 @@
 #include "hardware/i2c.h"
 
 extern "C" {
-#include <pico/cyw43_arch.h>
 
 const char *g_platform_name = PLATFORM_NAME;
 static bool g_scsi_initiator = false;
@@ -73,7 +72,7 @@ void mbed_error_hook(const mbed_error_ctx * error_context);
 /***************/
 
 // Helper function to configure whole GPIO in one line
-static void gpio_conf(uint gpio, enum gpio_function fn, bool pullup, bool pulldown, bool output, bool initial_state, bool fast_slew)
+static void gpio_conf(uint gpio, gpio_function_t fn, bool pullup, bool pulldown, bool output, bool initial_state, bool fast_slew)
 {
     gpio_put(gpio, initial_state);
     gpio_set_dir(gpio, output);
@@ -82,7 +81,7 @@ static void gpio_conf(uint gpio, enum gpio_function fn, bool pullup, bool pulldo
 
     if (fast_slew)
     {
-        padsbank0_hw->io[gpio] |= PADS_BANK0_GPIO0_SLEWFAST_BITS;
+        pads_bank0_hw->io[gpio] |= PADS_BANK0_GPIO0_SLEWFAST_BITS;
     }
 }
 
@@ -127,13 +126,17 @@ void platform_init()
 {
     // Make sure second core is stopped
     multicore_reset_core1();
+#ifndef __MBED__
+    Serial.begin(115200);
+#endif // __MBED__
 
     // Default debug logging to disabled
     g_log_debug = false;
 
     // Report platform and firmware version
     log("Platform: ", g_platform_name);
     log("FW Version: ", g_log_firmwareversion);
+    debuglog("PicoSDK: ", PICO_SDK_VERSION_STRING);
 
     /* First configure the pins that affect external buffer directions.
      * RP2040 defaults to pulldowns, while these pins have external pull-ups.
@@ -173,8 +176,8 @@ void platform_init()
         gpio_conf(scsi_pins.IN_ATN,    GPIO_FUNC_SIO, false, false, false, false, false);
         delay(10); /// Settle time
         // Check option switches
-        bool optionS1 = !gpio_get(scsi_pins.IN_ATN);
-        bool optionS2 = !gpio_get(scsi_pins.IN_ACK);
+        [[maybe_unused]] bool optionS1 = !gpio_get(scsi_pins.IN_ATN);
+        [[maybe_unused]] bool optionS2 = !gpio_get(scsi_pins.IN_ACK);
 
         // Reset REQ to appropriate pin for older hardware
         scsi_pins.OUT_REQ = SCSI_OUT_REQ_BEFORE_2023_09a;
@@ -201,9 +204,9 @@ void platform_init()
     // Get flash chip size
     uint8_t cmd_read_jedec_id[4] = {0x9f, 0, 0, 0};
     uint8_t response_jedec[4] = {0};
-    __disable_irq();
+    uint32_t status = save_and_disable_interrupts();
     flash_do_cmd(cmd_read_jedec_id, response_jedec, 4);
-    __enable_irq();
+    restore_interrupts_from_disabled(status);
     g_flash_chip_size = (1 << response_jedec[3]);
     log("Flash chip size: ", (int)(g_flash_chip_size / 1024), " kB");
 
@@ -290,9 +293,6 @@ void platform_late_init()
         gpio_conf(scsi_pins.IN_RST,    GPIO_FUNC_SIO, true, false, false, true, false);
 
 
-#ifndef __MBED__
-    Serial.begin();
-#endif // __MBED__
 
 #ifdef ENABLE_AUDIO_OUTPUT
         // one-time control setup for DMA channels and second core
@@ -495,7 +495,7 @@ static void adc_poll()
     * If ADC sample reads are done, either via direct reading, FIFO, or DMA,
     * at the same time a SPI DMA write begins, it appears that the first
     * 16-bit word of the DMA data is lost. This causes the bitstream to glitch
-    * and audio to 'pop' noticably. For now, just disable ADC reads when audio
+    * and audio to 'pop' noticeably. For now, just disable ADC reads when audio
     * is playing.
     */
    if (audio_is_active()) return;
@@ -570,7 +570,9 @@ static void watchdog_callback(unsigned alarm_num)
 #ifdef __MBED__
             uint32_t *p =  (uint32_t*)__get_PSP();
 #else
-            uint32_t *p =  (uint32_t*)__get_MSP();
+            uint32_t msp;
+            asm volatile ("MRS %0, msp" : "=r" (msp) );
+            uint32_t *p = (uint32_t*)msp;
 #endif
             for (int i = 0; i < 8; i++)
             {
@@ -597,7 +599,9 @@ static void watchdog_callback(unsigned alarm_num)
 #ifdef __MBED__
             uint32_t *p =  (uint32_t*)__get_PSP();
 #else
-            uint32_t *p =  (uint32_t*)__get_MSP();
+            uint32_t msp;
+            asm volatile ("MRS %0, msp" : "=r" (msp) );
+            uint32_t *p = (uint32_t*)msp;
 #endif
             for (int i = 0; i < 8; i++)
             {
@@ -627,7 +631,7 @@ void platform_reset_watchdog()
     if (!g_watchdog_initialized)
     {
         int alarm_num = -1;
-        for (int i = 0; i < NUM_TIMERS; i++)
+        for (int i = 0; i < NUM_GENERIC_TIMERS; i++)
         {
             if (!hardware_alarm_is_claimed(i))
             {
@@ -736,7 +740,7 @@ bool platform_rewrite_flash_page(uint32_t offset, uint8_t buffer[PLATFORM_FLASH_
     assert(offset >= PLATFORM_BOOTLOADER_SIZE);
 
     // Avoid any mbed timer interrupts triggering during the flashing.
-    __disable_irq();
+    uint32_t status = save_and_disable_interrupts();
 
     // For some reason any code executed after flashing crashes
     // unless we disable the XIP cache.
@@ -754,17 +758,17 @@ bool platform_rewrite_flash_page(uint32_t offset, uint8_t buffer[PLATFORM_FLASH_
     for (int i = 0; i < num_words; i++)
     {
         uint32_t expected = buf32[i];
-        uint32_t actual = *(volatile uint32_t*)(XIP_NOCACHE_BASE + offset + i * 4);
+        uint32_t actual = *(volatile uint32_t*)(XIP_SRAM_BASE + offset + i * 4);
 
         if (actual != expected)
         {
             log("Flash verify failed at offset ", offset + i * 4, " got ", actual, " expected ", expected);
-            __enable_irq();
+            restore_interrupts_from_disabled(status);
             return false;
         }
     }
 
-    __enable_irq();
+    restore_interrupts_from_disabled(status);
 
     return true;
 }
@@ -774,7 +778,7 @@ void platform_boot_to_main_firmware()
     // To ensure that the system state is reset properly, we perform
     // a SYSRESETREQ and jump straight from the reset vector to main application.
     g_bootloader_exit_req = &g_bootloader_exit_req;
-    SCB->AIRCR = 0x05FA0004;
+    scb_hw->aircr = 0x05FA0004;
     while(1);
 }
 
@@ -787,7 +791,7 @@ void btldr_reset_handler()
         application_base = (uint32_t*)(XIP_BASE + PLATFORM_BOOTLOADER_SIZE);
     }
 
-    SCB->VTOR = (uint32_t)application_base;
+    scb_hw->aircr = (uint32_t)application_base;
     __asm__(
         "msr msp, %0\n\t"
         "bx %1" : : "r" (application_base[0]),
@@ -859,10 +863,10 @@ bool platform_write_romdrive(const uint8_t *data, uint32_t start, uint32_t count
     assert(start < platform_get_romdrive_maxsize());
     assert((count % PLATFORM_ROMDRIVE_PAGE_SIZE) == 0);
 
-    __disable_irq();
+    uint32_t status = save_and_disable_interrupts();
     flash_range_erase(start + ROMDRIVE_OFFSET, count);
     flash_range_program(start + ROMDRIVE_OFFSET, data, count);
-    __enable_irq();
+    restore_interrupts_from_disabled(status);
     return true;
 }
 

lib/BlueSCSI_platform_RP2040/BlueSCSI_platform_gpio.h

@@ -3,7 +3,9 @@
 #pragma once
 
 #include <hardware/gpio.h>
+#ifdef BLUESCSI_NETWORK
 #include <pico/cyw43_arch.h>
+#endif
 
 // SCSI data input/output port.
 // The data bus uses external bidirectional buffer, with
@@ -56,8 +58,13 @@
 
 // Status LED pins
 #define LED_PIN      25
-#define LED_ON()     platform_network_supported() ? cyw43_gpio_set(&cyw43_state, 0, true) : sio_hw->gpio_set = 1 << LED_PIN
-#define LED_OFF()    platform_network_supported() ? cyw43_gpio_set(&cyw43_state, 0, false) : sio_hw->gpio_clr = 1 << LED_PIN
+#ifdef BLUESCSI_NETWORK
+    #define LED_ON()     platform_network_supported() ? cyw43_gpio_set(&cyw43_state, 0, true) : sio_hw->gpio_set = 1 << LED_PIN
+    #define LED_OFF()    platform_network_supported() ? cyw43_gpio_set(&cyw43_state, 0, false) : sio_hw->gpio_clr = 1 << LED_PIN
+#else
+    #define LED_ON()     sio_hw->gpio_set = 1 << LED_PIN
+    #define LED_OFF()    sio_hw->gpio_clr = 1 << LED_PIN
+#endif
 
 // SDIO and SPI block
 #define SD_SPI_SCK   10

lib/BlueSCSI_platform_RP2040/BlueSCSI_platform_network.cpp

@@ -21,9 +21,10 @@
 #include <network.h>
 
 extern "C" {
-
+#ifdef BLUESCSI_NETWORK
 #include <cyw43.h>
 #include <pico/cyw43_arch.h>
+#endif
 
 #ifndef CYW43_IOCTL_GET_RSSI
 #define CYW43_IOCTL_GET_RSSI (0xfe)
@@ -34,17 +35,12 @@ static const char defaultMAC[] = { 0x00, 0x80, 0x19, 0xc0, 0xff, 0xee };
 
 static bool network_in_use = false;
 
-bool platform_network_supported()
+bool __not_in_flash_func(platform_network_supported)()
 {
-	/* from cores/rp2040/RP2040Support.h */
-#if !defined(ARDUINO_RASPBERRY_PI_PICO_W)
-	return false;
-#else
-	extern bool __isPicoW;
-	return __isPicoW;
-#endif
+	return rp2040.isPicoW();
 }
 
+#ifdef BLUESCSI_NETWORK
 int platform_network_init(char *mac)
 {
 	pico_unique_board_id_t board_id;
@@ -311,4 +307,5 @@ void cyw43_cb_tcpip_set_link_up(cyw43_t *self, int itf)
 		log_f("Successfully connected to Wi-Fi SSID \"%s\"", ssid);
 }
 
+#endif
 }

lib/BlueSCSI_platform_RP2040/audio.cpp

@@ -63,7 +63,7 @@ const uint8_t snd_parity[256] __attribute__((aligned(256), section(".scratch_y.s
  * receiver.
  * 
  * To facilitate fast lookups this table should be put in SRAM with low
- * contention, aligned to an apppropriate boundry.
+ * contention, aligned to an appropriate boundary.
  */
 const uint16_t biphase[256] __attribute__((aligned(512), section(".scratch_y.biphase"))) = {
     0xCCCC, 0xB333, 0xD333, 0xACCC, 0xCB33, 0xB4CC, 0xD4CC, 0xAB33,
@@ -306,7 +306,7 @@ static void snd_process_b() {
 }
 
 // Allows execution on Core1 via function pointers. Each function can take
-// no parameters and should return nothing, operating via side-effects only.
+// no parameters and should return nothing, operating via side effects only.
 static void core1_handler() {
     while (1) {
         void (*function)() = (void (*)()) multicore_fifo_pop_blocking();
@@ -497,7 +497,7 @@ bool audio_play(uint8_t owner, ImageBackingStore* img, uint64_t start, uint64_t
     sfcnt = 0;
     invert = 0;
 
-    // setup the two DMA units to hand-off to each other
+    // setup the two DMA units to hand off to each other
     // to maintain a stable bitstream these need to run without interruption
 	snd_dma_a_cfg = dma_channel_get_default_config(SOUND_DMA_CHA);
 	channel_config_set_transfer_data_size(&snd_dma_a_cfg, DMA_SIZE_16);

lib/BlueSCSI_platform_RP2040/rp2040.ld

@@ -1,7 +1,7 @@
 MEMORY
 {
     FLASH(rx) : ORIGIN = 0x10000000, LENGTH = 352k
-    RAM(rwx) : ORIGIN = 0x20000000, LENGTH = 256k  /* Leave space for pico-debug */
+    RAM(rwx) : ORIGIN = 0x20000000, LENGTH = 240k  /* Leave space for pico-debug */
     SCRATCH_X(rwx) : ORIGIN = 0x20040000, LENGTH = 4k
     SCRATCH_Y(rwx) : ORIGIN = 0x20041000, LENGTH = 4k
 }

lib/BlueSCSI_platform_RP2040/rp2040_btldr.ld

@@ -11,7 +11,7 @@
      * which comes as part of the main firmware.elf and is never overwritten.
      */
     FLASH(rx) : ORIGIN = 0x10000100, LENGTH = 128k-256
-    RAM(rwx) : ORIGIN = 0x20000000, LENGTH = 240k  /* Leave space for pico-debug */
+    RAM(rwx) : ORIGIN = 0x20000000, LENGTH = 256k  /* Leave space for pico-debug */
     SCRATCH_X(rwx) : ORIGIN = 0x20040000, LENGTH = 4k
     SCRATCH_Y(rwx) : ORIGIN = 0x20041000, LENGTH = 4k
 }