The Boardoza SM351LT is a high-sensitivity magnetoresistive sensor module designed for lid, door, and drawer position detection. It features omnipolar sensing, activating with either pole of a magnet. With a push-pull output, the module eliminates the need for an external pull-up resistor, simplifying integration into various applications.
| Front Side | Back Side |
|---|---|
 |
 |
- Lid, Door, and Drawer Position Detection: Detects open/closed states using a magnet.
- Non-Contact Operation: Works through non-metallic surfaces, making it ideal for sealed enclosures.
- Omnipolar Sensing: Responds to both north and south poles of a magnet for flexible placement.
- Push-Pull Output: Built-in driver circuit eliminates the need for an external pull-up resistor.
- Dual LED Indicators: Includes Power Good LED (D1) and Output Indicator LED (D2) for real-time status feedback.
Model: Honeywell SM351LT
Voltage Supply: 3.3V - 5V
Voltage Input Type: 3-pin 2.50mm header
Current Consumption: 150µA
Sensor Type: Magnetoresistive Sensor
Output Type: Push-Pull (No external pull-up required)
Operate Sensing Range: Typical: 7 Gauss
Operating Temperature: -40°C to +85°C
Board Dimensions: 20mm x 20mm
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VCC | Power Supply (3.3V - 5V) |
| 2 | OUT | Digital Output (Push-Pull) |
| 3 | GND | Ground |
Boardoza SM351LT Datasheet.pdf
- V1.0.0 - Initial Release
- If you have any questions or need support, please contact [email protected]
Shield:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
