Python script for generating ChibiOS board.h files based on a consise yaml representation.
See board.yaml.example for examples of the yaml syntax.
All boards require the below parameters:
| KEY | DESCRIPTION |
|---|---|
| NAME | Name of the board |
| LSEFREQ | LSE Frequency |
| HSEFREQ | HSE Frequency |
| VOLTAGE | Voltage as decimal (eg 3.3) |
| MCUTYPE | Type of MCU (eg STM32F405xx) |
| DEFAULT | List of default attributes for pins |
| PINS | Pin names and corresponding lists of attributes |
Board-specific parameters can be included under the 'other' key, such as STM32_LSEDRV and STM32_HSE_BYPASS.
If the parameter does not have a value associated with it, use null or ~.
Pins may be given a variety of attributes that come from several categories, multiple attributes from the same category is not supported.
| MODE | OTYPE | OSPEED | PUPD | OD |
|---|---|---|---|---|
| INPUT | PUSHPULL | VERYLOWSPEED | FLOATING | STARTLOW |
| OUTPUT | OPENDRAIN | LOWSPEED | PULLUP | STARTHIGH |
| ANALOG | MEDIUMSPEED | PULLDOWN | ||
| AF1,AF2,AF3... | HIGHSPEED |
