SDR_Matlab_LTE

This simple OFDM demo is based on LTE downlink format for testing SDR hardware.

Using Software Designed Radio (SDR) to transmit OFDM signals at 2.4 GHz.

Transmitter and Receiver hardware : Zedboard (Xilinx Zynq®-7000) + AD9361 (Analog Device-FMCOMMS3)

Software needed :

• Matlab (R2018a version in this example)
• Libiio Library
• Zynq Linux Image (2015_R2-2016_07_26 version in this example)

Code Structure :

Please open Matlab windows to run

• Main_self.m for one transceiver
• Main_TwoBoard.m for transmitter and receiver

GUI_RX

Video Demo : https://youtu.be/jywNhMAHi7Y

TX RX Hardware Parameters

Center Frequency	2.4 GHz
Bandwidth	10 MHz
Sampling Rate	15.36 MS/s
Mapping	64 QAM
FFT Size	1024
Cyclic Prefix Length	80 (symbol#0), 72(symbol#1~6)
Resource Block	50
Samples Per Frame	307200
PC Host IP address	192.168.3.1
TX IP address	192.168.3.6
RX IP address	192.168.3.7

The way to change Hardware IP / Mac address

Edit /etc/init.d/rc.local file in Linux OS

## Change MAC address
sudo ifconfig eth0 down
sudo ifconfig eth0 hw ether 00:0A:35:00:01:23
sudo ifconfig eth0 up

Then, use router DHCP hand setting mode to distribute network configuration parameters :

Hardware shut down process

To shut down the hardware properly, execute the commands below.

Enter Linux by ssh :

ssh [email protected]

Default password :

analog

Shutdown command :

sudo shutdown -h now