Search results

Ball-socket for head and tail

Feature Change

Status: Open.

#12 In OperationSmallKat/Luna-CAD;

· madhephaestus opened on Jan 25, 2021

Printbed is missing 2 u shaped covers for the neckand tail

bugSomething isn't workingSomething isn't working

Status: Open.

#10 In OperationSmallKat/Luna-CAD;

· madhephaestus opened on Jan 22, 2021

Centered hinge for horns

Feature Change

Status: Open.

#8 In OperationSmallKat/Luna-CAD;

· madhephaestus opened on Jan 13, 2021

the battery tabs hold the battery too close to the bottom

bugSomething isn't workingSomething isn't working

Status: Open.

#7 In OperationSmallKat/Luna-CAD;

· madhephaestus opened on Jan 13, 2021

battery tab slots should be tapered so the battery can be pushed into place

bugSomething isn't workingSomething isn't working

Status: Open.

#6 In OperationSmallKat/Luna-CAD;

· madhephaestus opened on Jan 13, 2021

mount holes for the xt30 need chamfer

bugSomething isn't workingSomething isn't working

Status: Open.

#5 In OperationSmallKat/Luna-CAD;

· madhephaestus opened on Jan 13, 2021

battery connector xt30 collides with the side of the body frame

bugSomething isn't workingSomething isn't working

Status: Open.

#4 In OperationSmallKat/Luna-CAD;

· madhephaestus opened on Jan 13, 2021

recessed holes in the battery compartment need more clearence

bugSomething isn't workingSomething isn't working

Status: Open.

#3 In OperationSmallKat/Luna-CAD;

· madhephaestus opened on Jan 13, 2021

Socket driver keepaway needs to be at least 9mm

bugSomething isn't workingSomething isn't working

Status: Open.

#2 In OperationSmallKat/Luna-CAD;

· madhephaestus opened on Jan 13, 2021

add zip tie holes for head and tail

Feature Change

Status: Open.

#1 In OperationSmallKat/Luna-CAD;

· keionbis opened on Jan 13, 2021