Toolhead for Micron and other PFA printers (Can also work on bigger 2020 based printers with the carriages linked below)
- 2x 4010 blower fans
- 1x 2510 axial fan
- various m3 hardware
- BMG extruder kit , or G2 extruder kit (HGX variant is planned)
- Dragon Compatible hotend, Revo Voron, Rapido, TZV6 with or without v6 nozzle
- NOTE: if using a TZV6 hotend with the stock nozzle (small bambu style nozzle) you need to use the dragon hotend mount
What Carriage Do I Print?
| Printer | Rail |
|---|---|
| Micron/SF/Pandora | Stock MGN9H |
| Micron/SF/Pandora | Stock MGN9C |
| Micron/SF/Pandora | Chirpy MGN9H |
| Micron/SF/Pandora | Chirpy MGN9C |
| V0 | Stock works but i recommend Chirpys that can be found here |
| V2/Trident | MGN12H/MGN9H |
- HGX Based extruder
- Revisit BMG based extruder
- Bowden option
- larger variety of hotend mounts
- fixed offset between ducts and probe mounts that was introduced with the previous fix
- fixed offset between hotend mount and rear of ducts causing toolhead to tilt
- added flanged m2 heatsets in the filament path between the main body and hotend mount for use with the leafcutter
- Uploaded first version of assembly Manual
- Updated WWG2, fixed minor printablity issues
- fixed alignment on the filament sensors screw holes
- Added Stealthfork Logo main body and LED files
- Added X endstop cable channel to the 2020 Carriage
- Fixed fitment issue with ReVolcano mount
- Fixed G2 tension arm spring counterbore,
- Added Ziptie mounts for easier wire management behind ducts
- Updated Tension arm built in support
- Updated all hotend mounts to now work with LeafCutter
- Added new Left Ducts for LeafCutter
- Added cutting arm and blade holder
- Hotend mounts and main bodies were also merged with leafcutter, now stock and cutter bodies and hotend mounts are the same files
- Added missing tzv6 mounts and re uploaded latest hotend line up cad file
- updated all hotend mounts to fix the mounting screw length to m3x25
- added support for Dragon Ace hotend
- added support for ReVolcano (Revo voron heatsink with hemera heatbreak and volcano heater)
- fixed rapido mount to use correct mounting m2.5 screws
- updated rapido mount to sit lower for HF and UHF ducts
- fixed fan intake hole size on right ducts
- added updated hotend mounts with HF and UHF nozzle location
- Added CAD and STLs for new 2020 printer carriage for MGN12h and MGN9h
- Updated CAD to v29
- missed exporting latest right fan ducts from previous commit, they worked but had an extra chamfer that needed to be removed
- modified main housing to now support Sherpa bolt pattern as well as Orbiter 2 bolt pattern
- ducts were updated to fit the latest change
- a Base Grill cad file was uploaded so custom grills can be made
- Fixed an issue that was introduced with the latest LED changes from 10-28
- updated main housings, and Cad file
- Updated assembly to v20
- Updated the LED to use the same style as Stealthburner that inserts from the bottom
- Fixed orientation of various files
- Added latest CAD assembly
- removed recesses in main housing as they arent needed anymore since hotend mount screws are recessed into the printed part
- added a Voron logo variant of the main body
- added LED logo parts for both Micron and Voron logo
- added a dual filament sensor WWG2 variant extruder as the default extruder option in CAD
- organized files a bit more
