Skip to content

bluekitchen/waveshare-esp32-s3-touch-lcd-nrf54l15

Repository files navigation

Nordic nRF54L15 Add-On For Waveshare ESP32-S3-LCD-Touch-1.85C box

This breakout board adds a Nordic nRF54L15 Bluetooth Controller inside the speaker box of the Waveshare ESP32-S3-LCD-Touch-1.85C for LE Audio.

It uses the nRF54L15 module from Holyiot, e.g. available from AliExpress, as it is to solder due to it's castellated edges.

In addition to the full HCI UART, an additional pin is connected for time sync, required for True Wireless Stereo (TWS) in LE Audio.

Flashing the nRF54L15

After soldering, it can be mounted on the Waveshare box to provide power. It can then and be programmed with an SWD programmer via the provided pin-header through-holes.

Pin Out

UART functions as seen from nRF54L15

ESP32-S3 GPIO Function nRF54L15
1 nRESET nRESET
7 TX P1.04
6 RX P1.05
12 RTS P1.06
13 CTS P1.07
13 Time Sync P1.11

Installation

To fit the add-on inside the Waveshare box, you need to:

  • extend the hole around the connector in the middle plastic cover
  • remove one brass stand-off

Images

Break-out board, showing mounted pin headers Wavehshare ESP32-S3-LCD-Touch-1.85C with breakout board

About

Nordic nRF54L15 add-on for Waveshare ESP32-S3-Touch-LCD-1.85C Box with Speaker

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published